LinksysメーカーWPS11の使用説明書/サービス説明書
ページ先へ移動 of 30
Instant Wireless ™ Series Wireless PrintSer ver Use this Guide to install: Model No.: WPS11 User Guide.
COPYRIGHT & TRADEMARKS Copyright © 2001 Linksys, All Rights Reserved. Microsoft, Windows, and the Windows logo are r egister ed trademarks of Micr osoft Corporation. All other trademarks and brand names are the pr operty of their respective proprietors.
T able of Contents Introduction 1 The Instant Wireless ™ Wireless PrintServer 1 Features 1 Package Contents 2 Getting to Know the Wireless PrintSer ver 3 The Wireless PrintSer ver’s LEDs 3 The Wir.
• One Instant W ireless™ Wireless PrintSer ver • One Antenna (Not Sho wn) • One Setup Utility CD • One P ow er Adapter • One User Guide on Setup Utility CD (Not Sho wn) • One Registratio.
4 LAN This port connects to your wired netw ork using a standard Category 5 netw ork cable. Printer This Parallel (LPT) P ort connects to your printer . Reset Button Briefly pressing the Reset Button will refresh the W ireless PrintSer v er’ s connections, potentially clear- ing any jammed links.
6 Connecting the Wireless PrintServer to Y our Network 1. After po wering on the Wireless PrintServer , plug one end of a UTP Category 5 (or better) cable into the W ireless PrintServer’ s LAN P or t. 2. Connect the other end of the cable into a netw orked hub or s witch.
1. T o begin dri ver installation, click the Start button, select Run , and type D:Driv erWin9xntAddP ort_Linksys.ex e (where D is the letter of y our CD-R OM driv e) in the Open f ield that appears. Click the OK button. 2. The Install Wizar d window appears.
10 5. Dri ver installation is no w completed but the Print Driv er still needs to be conf igured. The W ireless-Ready PrintSer ver will not function properly until the Print Driv er is conf igured. Check the box beside Conf igure Print Driv er No w and click the Finish button to continue.
12 11 9. The Ad d New Printer Wizar d will come up at this point. F ollo w the stan- dard procedure for adding printers under W indows. If y ou hav e an y ques- tions on adding printers, please refer to your W indo ws documentation. 10. After your printer(s) ha ve been added , you will return to the Conf igure Printer P or t screen.
14 13 Bi-Admin: PrintSer ver Management Overview The W ireless PrintSer ver is managed b y a utility program called Bi-Admin on the W ireless PrintSer ver’ s Setup CD .
16 15 Obtaining Device Information: The Device Information Icon T o access infor mation about the W ireless PrintSer ver , either click on it in the De vice List windo w (on the right side of the Bi-Admin windo w) or highlight the W ireless PrintServer and click on the Device Inf ormation icon, sho wn abo ve.
18 17 The W ireless PrintSer ver comes with a default device name printed on the bot- tom of the unit, and al wa ys star ting with the pref ix SC (example: SC489392). The SC name is the name of the W ireless PrintServer an y time users on the net- w ork quer y it .
Logical P ort Configuration: Logical P ort Configuration Icon T o set or change the W ireless PrintServer’ s logical port set- tings, highlight the W ireless PrintSer ver to be changed and click on the Logical P ort icon (sho wn here). The Logical P ort Conf iguration windo w will appear .
When the Conf igure Ser v er scr een appears, enter the W ireless PrintServer name (in the example sho wn here SCA71107 ) . Then enter your pass w ord (if you created one) into the P assw ord dropdo wn bo x and type it again in the V erify Pass word to conf ir m it.
Click the Wir eless tab to allo w you to vie w infor mation about the W ireless PrintServer . No values can be changed on this screen. This screen is for infor- mation onl y . Clicking the Refresh button causes the W ireless PrintServer to retriev e this infor mation again.
Advanced Properties The Adv anced Properties section of the W eb-based Utility is for users who ha ve a thorough understanding of netw orks and network settings. Changing these settings can cause inter ruption of network communication and mak e the W ireless PrintSer ver cease to function properl y .
Click the Logical Printers ta b to vie w or change the logical printer settings of the W ireless PrintSer ver . F or each Logical Printer , the follo wing f ields are av ailable: Logical Printer(P ort) - Select the Logical Printer P or t you wish to conf igure.
Click the SNMP tab to view or change the SNMP settings of the Wireless PrintServer . The W ireless PrintSer ver supports SNMP (Simple Network Management Protocol). This allo ws netw ork super visors to monitor and control the W ireless PrintSer ver using netw ork management platfor ms such as HP OpenV iew , IBM SystemV iew , etc.
Internet Printing Protocol (IPP) IPP (Internet Printing Protocol) is a new standards-based system to allo w remote printing from a PC to an y accessible printer . Nor mally , the printer will be attached to a computer or other de vice which functions as an IPP Server .
5. Click Sa ve to create the IPP port on your system. Y ou will see a message con- f irming that the por t has been created , then the follo wing dialo g: 6. Either select an existing printer to use the ne w por t, and click OK . OR Click the Add Ne w Printer button to create a new printer to use the IPP port.
2. Select Netw ork Printer and click Next to see the Locate your Printer screen, as sho wn below . 3. Select Connect to a printer on the Internet or on your intranet, and enter the URL of the IPP Server as follo ws, where ip_address represents the IP Address of the IPP Server , and 631 is the por t number .
38 DHCP Support for the Wireless PrintSer ver T o use DHCP , which assigns non-static IP addresses, y ou must ha ve a DHCP server and DHCP management software. Otherwise, the W ireless PrintServer's IP address will remain unkno wn, and connecting to it will impossible.
Appendix Normal printing only sends print signals from a PC to a printer . Bi-dir ection- al printing , also called bitronic printing, refers to a printer's ability to do just the opposite- talk back to a PC to notify it of a print job status, paper jams, etc.
printer status, do not use it with the W ireless PrintSer ver - the softw are is most likel y not network-capab le. F or best results, turn off the printer’ s bi-directional function either b y ( 1 .
Ethernet - IEEE standard netw ork protocol that specif ies ho w data is placed on and retriev ed from a common transmission medium. Has a transfer rate of 10 Mbps. F or ms the underlying transport vehicle used b y several upper -level protocols, including TCP/IP and XNS.
NetBIOS - The native netw orking protocol in DOS and W indows netw orks. Although originall y combined with its transport lay er protocol (NetBEUI), NetBIOS toda y provides a pro g ramming interface for applications at the ses- sion la yer (la yer 5).
TCP/IP - T ransmission Control Protocol/Internet Protocol (TCP/IP) is the basic communication language or protocol of the Internet. It can also be used as a communications protocol in a priv ate netw ork (either an intranet or an extranet).
Environmental Dimensions: 5.91” x 8.66” x 1.18” (150mm x 220mm x 30mm) Unit Weight: 5.6 oz. (0.16 kg) P ower: Exter nal, 12V DC , 800mA Certifications: FCC Class B , CE Mark Commercial Operating.
52 51 Contact Information F or help with the installation or operation of this product, contact Linksys Customer Support at one of the phone numbers or Inter net addresses below . Sales Information 800-546-5797 (LINKSYS) T ech Support 866-242-8558 RMA Issues 949-261-1288 Fa x 949-261-8868 Email support@linksys.
© Copyright 2001 Linksys, All Rights Reserved. http://www .linksys.com.
デバイスLinksys WPS11の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Linksys WPS11をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLinksys WPS11の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Linksys WPS11の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Linksys WPS11で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Linksys WPS11を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLinksys WPS11の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Linksys WPS11に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLinksys WPS11デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。