AbocomメーカーARM904の使用説明書/サービス説明書
ページ先へ移動 of 10
Multi-Function Wire- less Router Wireless Access Point Broadband Internet Access 4-Port Switching Hub Quick Install Guide L This guide covers only the most common situations.
R equirements • DSL or Cable modem for broadband Internet access. • Standard Network cables. • TCP/IP network protocol installed on each PC. • Wireless Access Point requires Wirele ss devices compliant with the IEEE 802.11g specifications. Setup n Physical Installation 1.
Page 2 4. Connect the supplied Power Adapt er and power on. 5. Check the LEDs • The Power , Internet , and WLAN LEDs should be ON. • For each active LAN (PC) connection, the LAN LED should be ON. o Configuration The Wireless Router can "Plug and Play" i f your DSL/Cable modem connec- tion uses only a dynam ic IP address.
Page 3 Manual Configuration 1. Start your PC. If it is already started, restart it. It will then obtain an IP Address fro m the Wireless Router's DHCP Server. 2. Start your WEB browser. In the Address box, enter the fol lowing: HTTP://192.168.1.254 The default user name is 〝 adm in 〞 , the default password is left blank.
PC Setup - Windows n TCP/IP Setup • If using the default Wireless Router settings, and the default Win- dows TCP/IP settings, no changes need to be made.
4. The option "Obtain an IP address autom atically" should be select ed, as shown above. o Internet Access For Window s 9x/ME/2000 1. Select Start Menu - Settings - C ontrol Panel - Internet Opti ons . 2. Select the Connection tab, and cli ck the Setup button.
Page 6 For Window s XP 1. Select Start Menu - Control Panel - Network and Internet Connect ions . 2. Select Set up or change your Internet Connecti on . 3. Select the Connection tab, and cli ck the Setup button. 4. Cancel the pop-up "Location Inform ation" screen.
Page 7 Macintosh Setup n Internet Access 1. Open the TCP/IP Control Panel . 2. Select Ethernet from the Connect via pop-up m enu. 3. Select Using DHCP Server from the Confi gure pop-up menu. The DHCP Client ID fiel d can be left blank. 4. Close the TCP/IP panel, savi ng your settings.
Page 8 Linux Setup using X Windows n Internet Access Follow this procedure to set your sy stem to act as a DHCP cl ient, obtaining an IP Address and related data from the Wireless Router's DHCP Server. 1. Start your X Windows client . 2. Select Control Panel - Ne twork 3.
Page 9 Wireless Access P oint Setup In order to use the Access Point, other Wireless devices m ust use the same SSID and WEP settings as the Wireless Router.
デバイスAbocom ARM904の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Abocom ARM904をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAbocom ARM904の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Abocom ARM904の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Abocom ARM904で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Abocom ARM904を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAbocom ARM904の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Abocom ARM904に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAbocom ARM904デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。