MarantzメーカーCC4300の使用説明書/サービス説明書
ページ先へ移動 of 34
Model CC4300 User Guide 5 Disc CD Changer R.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CA UTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BA CK). NO USER-SER VICEABLE P ARTS INSIDE.
This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1 . Read Instructions – All the safety and operating instructions should be read before the product is operated.
16.Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
English 1 General Information ..................................................................................................................2 Unpacking ...............................................................................................
English First check the contents of the packaging. It should contain the following: - CD-Player CC4300 - Remote control unit (RC4300CC) - Batteries (AA size) x 2 - Audio cable (1 - with red and white .
English General Information ❖ Playing CD-R W discs This unit can play back the CD-RW (ReWritable) discs as well as ordinary music CD and CD-R (Recordable) discs. • The CD-R and CD-RW discs should contain properly-recorded TOC information so that they can be played back.
English q q PO WER ON/ST ANDBY button Press this switch to turn the power on and press again to turn to stand by. w w ST ANDBY indicator Lights up red when the CD player is in Stand-by mode. e e Disc tray Load a compact disc on the disc tray. r r Disc selector buttons Use these buttons to select the disc to be played.
English Functional Overview ! ! 8 8 § (Forward skip/Sear ch) button • Press this button to play from the beginning of a next track. • Press and hold down this button to search for a specific passage in fast forward. ! ! 9 9 2 / ; (Play/P ause) button • Press this button to start playing in the stop or pause mode.
English Functional Overview z z ANALOG output jacks Connect these jacks to the CD(or AUX) input jacks of your amplifier or receiver. x x RS232C The RS232C port is to be used in conjunction with an external controller to control the operation of the CD player by using an external device.
English 7 q PO WER button Press this button to turn the power on and press again to turn to stand by. w REPEA T button Press this button to play a track, a disc or all discs repeatedly. e A< . >B button Press this button to play a specific passage repeatedly.
English Functional Overview ❖ Operation of Remote Control Unit 1. Remote control The distance between the transmitter of the remote control unit and the IR SENSOR of the CC4300 should be less than about 5 meters.
English Precautions concerning connections : • Do not plug the AC input cord into the AC outlet when plugging and unplugging connection cords. • Be sure to connect the white plugs to the L(Left) and the red plugs to the R(Right) jacks when making connections with the supplied cords.
English 10 Connecting the Remote Contr ol RS232C RS232C OUT OUT IN IN R L COAX. COAX. OPTICAL OPTICAL EXT. EXT. INT. INT. DIGITAL OUT DIGITAL OUT ANALOG OUT ANALOG OUT REMOTE CONTROL REMOTE CONTROL REMOTE REMOTE CONTROL CONTROL SELECTOR SELECTOR Amplifier / Receiver Cassette Deck OUT REMOTE CONTROL EXT.
English 1 . Press the POWER ON/STANDBY button on the unit or the POWER button on the remote control to turn on the power. or • Each time the POWER ON/STANDBY (or POWER ) button is pressed, this unit is turned on or off. 2 . Press the OPEN/CLOSE button on the unit to open the disc tray.
English Operations 1 . Press the OPEN/CLOSE button on the unit to open the disc tray. 2 . Change the desired discs. • During playing the disc q , the discs e and r can be changed. • After changing the discs, press the OPEN/CLOSE button on the unit to close the disc tray.
English Operations ❖ 1 Disc Random Play • Press RANDOM button on the unit or the RANDOM button on the remote control to play tracks in random sequence. or •“ RANDOM ” indicator lights up. • The unit automatically selects and plays tracks on the current disc in random sequence.
English Operations ❖ Repeating a Single T rack during Pla y • Press REPEAT button on the unit or the REPEAT button on the remote control after selecting the desired track. or ❖ Repeating a Disc during Play • After selecting the desired disc, press REPEAT button again in the 1 track repeat mode.
English Operations 3 . Select the desired track. Press ∞ / § buttons on the unit or the ∞ / § butto n or the NUMERIC buttons on the remote control. (Example) When selecting the track 4. or or 4 . Store the selected track in the memory. Press PROGRAM button on the unit or the PROGRAM button on the remote control.
English Operations ❖ Rectifying Any Wr ong Programmed Selection (Example) When the track 3, 5 and 7 of the disc 1 are programmed and you want to store the track 7 of the disc 3 instead of the track 5 of the disc 1.
English ❖ Clearing the Programmed Selections - To Clear One by One • Each time Stop/Clear button on the unit or the Stop/Clear button on the remote control is pressed in the program mode, the programmed selections are cleared one by one in the opposite sequence.
English Operations Note : • Up to 30 tracks for auto edit or 32 tracks for manual edit can be edited according to the tape length. • It is possible only on the current disc. • Use Disc selector or DISC SKIP buttons before entering edit mode. ❖ Setting Up A uto Edit 1 .
English ❖ Setting Up Manual Edit 1 . In the stop mode, select the manual edit mode. Press EDIT button twice on the unit or EDIT button twice on the remote control.
English Operations ❖ Checking the Edited T rac ks • In the edit mode, check as you do the programmed tracks. (refer to “ Checking the Programmed Selections ” on page 15) or ❖ Clearing All Edited T racks • In the edit mode, press the Stop/Clear button on the unit or the Stop/Clear button on the remote control for more than 4 seconds.
English - Synchro recording with Marantz one-way cassette deck, or Marantz auto reverse cassette deck set to one side ( O ) mode. 1 . After setting up Edit program automatically or manually, setup the cassette deck to rec pause state. 2 . Press Play/Pause button of the unit to start A side program.
English Operations When there are the undesired discs or tracks, you can delete up to 32 selections. ❖ Deleting the Undesired Discs or T racks 1 . In the stop mode, enter the delete mode. Press DELETE button on the unit or the DELETE button on the remote control.
English 5 . When deleting other tracks on that disc within 8 seconds after the above step 4 , repeat the above steps 3 and 4 and when deleting the tracks on other discs, repeat the above steps 2 , 3 and 4 . 6 . Start the deleted play. Press Play/Pause button on the unit or the Play button on the remote control.
English Operations ❖ Recovering the Deleted Selections - To Recover One by One • Each time Stop/Clear button on the unit or the Stop/Clear button on the remote control is pressed in the delete mode, the deleted selections are recovered one by one in the opposite sequence.
English • Each time TIME button is pressed during play, time display changes as follows: or • During random or programmed play, etc., the remaining playing time of the disc may show "- -- : --". • When a track of which number is greater than 30 is programmed, edited or being played, the time display may show "- -- : --".
English 26 The unit can receive external control signals by connecting a straight cable on the market to the D-sub 9 pin connector for RS232C external control. ❖ Pin Assignment of the Connector ❖ RS232C Physical Specification ❖ Data P acket A packet contains data from 5 to 8 bytes in length.
English 27 Operations Key No. Function Code ASCII Code 1 POWER ON/STANDBY 20 12 32h 30h 31h 32h 0dh 2 DISC 20 30 32h 30h 33h 30h 0dh 3 1 20 01 32h 30h 30h 31h 0dh 4 2 20 02 32h 30h 30h 32h 0dh 5 3 20 .
English T roubleshooting If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or our service organization. 28 REMEDY • Connect the cord securely. • Press the POWER button to ON.
English SYSTEM ........................................................................................................................ Compact Disc Digital Audio TYPICAL A UDIO PERFORMANCES Number of channels .........................................
COUNTRY COMPANY ADDRESS ALGERIE Azur 2000 8, Lotissement Ben Hatadi, Alger, Algerie ARMENIA NGYIG Ltd. 47 A/75 St. Lalaiants, 375000 Yerevan, Armenia AUSTRALIA Jamo Australia Pty.
デバイスMarantz CC4300の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Marantz CC4300をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMarantz CC4300の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Marantz CC4300の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Marantz CC4300で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Marantz CC4300を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMarantz CC4300の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Marantz CC4300に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMarantz CC4300デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
