MarantzメーカーSR5500の使用説明書/サービス説明書
ページ先へ移動 of 41
Model SR5500 User Guide AV Surround Receiver SR5500U DFU_00_cover 04.8.2, 3:26 PM Page 7 Adobe PageMaker 6.5J/PPC.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL .
12. Grounding or Polarization – This product may be equipped with a polarized alternating- current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.
ENGLISH 1 TABLE OF CONTENTS INTRODUCTION Thank you for purchasing the Marantz SR5500 Surround receiver. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR5500.
ENGLISH 2 Dolby Pro Logic II x is fully compatible with Dolby Surround Pro Logic technology and can optimally decode the thousands of commercially available Dolby Surround encoded video cassettes and television programs with enhanced depth and spatiality.
ENGLISH 3 FEATURES The SR5500 incorporates the latest generation of digital surround sound decoding technology such as Dolby Digital EX, Dolby Digital, DTS-ES (Discrete 6.1 and Matrix 6.1), DTS Neo:6 (Cinema, Music), Dolby Pro-Logic II x (Movie, Music and Game), Circle Surround II (Cinema and Music) .
ENGLISH 4 t INFRARED receiving sensor window This window receives infrared signals for the remote control. y SURROUND MODE button You can select the surround mode by pressing this button. u PURE DIRECT button When this button is pressed, the tone control circuitry is bypassed as well as Bass Management.
ENGLISH 5 FL DISPLAY a DISP (Display Off) indicator This indicator is illuminated when the SR5500 is in the display off condition. s SLEEP timer indicator This indicator is illuminated when the sleep timer function in the main-room is in use. d Multi-room system indicator This indicator is illuminated when the multi-room system is active.
ENGLISH 6 y Preamp Outputs (L, R, SL, SR, SBL, SBR, C) Jacks for L(front left), R (front right), C (Center), SL (surround left), SR (surround right), SBL (surround back left) and SBR (surround back right). Use these jacks for connection to external power amplifiers.
ENGLISH 7 m Cursor ( , , , ) / ENTER buttons (when AMP mode is selected) Use these button when oper ating the SETUP MAIN MENU . , MENU OFF button (when AMP mode is selected) This button is used to e xit from the SETUP MAIN MENU .
ENGLISH 8 RESETTING THE ALL CODE 1. Press and hold down the any Function Selector button and press SETUP button until the indicator blinking twice. 2. Press the code 9 - 8 - 1 . The indicator will blink twice. Then, RC5500SR will return to the factory preset code.
ENGLISH 9 OPERATION OF REMOTE CONTROL UNIT REMOTE CONTROL The distance between the transmitter of the remote control and the IR SENSOR of the SR5500 should be less than 5 meters. If the remote control is pointed in a direction other than the IR SENSOR or if there is an obstacle between them, use of the remote control may not be possible.
ENGLISH 10 CH.SEL LIP.SYNC PTY SUB-T/ATT AUDIO INPUT/DISC+ F.DIRECT RDS TUNE/SEARCH T-MODE TREBLE CHANNEL/SKIP BASS A/D P.SCAN/V-OFF 7.1CH IN STEREO MCH-ST MEMO CLEAR DISPLAY NIGHT CSII EX/ES VIRTUAL DTS PURE DIRECT AUTO 3 2 1 6 5 4 9 8 0 7 T.TONE MENU OFF SET UP/ MENU OSD VOL.
ENGLISH 11 CONNECTIONS SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7-speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, a surround back left and right speakers, and a subwoofer.
ENGLISH 12 Caution: • Be sure to use speakers with the specified impedance as shown on the rear panel of this unit. • To prevent damage to circuitry, do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit.
ENGLISH 13 CONNECTING VIDEO COMPONENTS ANALOG AUDIO VIDEO S-VIDEO DVD PLAYER VIDEO PROJECTOR SATELLITE TUNER DIGITAL AUDIO (COAXIAL) VCR TV VIDEO, S-VIDEO , COMPONENT JACKS There are 3 types of video jacks on the rear panel. VIDEO jack The video signal for the VIDEO jacks is the conventional composite video signal.
ENGLISH 14 ADVANCED CONNECTING CONNECTING MULTI CHANNEL AUDIO SOURCE The 7.1CH INPUT jacks are for multichannel audio source such as a SACD multichannel player, DVD audio player or external decoder. If you use these jacks, switch on the 7.1CH INPUT and set the 7.
ENGLISH 15 CONNECTING THE ANTENNA TERMINALS FM ANTENNA FM EXTERNAL ANTENNA AM LOOP ANTENNA AM EXTERNAL ANTENNA ASSEMBLING THE AM LOOP ANTENNA 1. Release the vinyl tie and take out the connection line. 2. Bend the base part in the reverse direction. 3.
ENGLISH 16 AC OUTLET AM GND ANTENNA COMPONENT VIDEO M.SPEAKER B L L SURROUND CENTER FRONT RR L R SURROUND BACK FM ( 75 Ω ) C B / P B C R / P R C R / P R C R / P R C B / P B C B / P B INPUT-1 YY MONITOR OUT INPUT-2 Y COAX.
ENGLISH 17 SETUP After all components are connected, initial setup must be performed. ON SCREEN DISPLAY MENU SYSTEM The SR5500 incorporates an on-screen menu system, which makes various operations possible by using the cursor ( , , , ) and ENTER buttons on the remote control or on the front panel.
ENGLISH 18 1 INPUT SETUP (ASSIGNABLE DIGITAL INPUT AND COMPONENT VIDEO INPUT) 4 digital inputs and 2 component video inputs can be assigned to a desired source. Use this menu to select the digital input jack to be assigned to the input source. 1. Select “ INPUT SETUP ” in SETUP MAIN MENU with or cursor button, and press the ENTER button.
ENGLISH 19 SURR. L: Set the distance from the surround left speaker to your normal listening position between 1 and 30 feet in 1.0 foot intervals (0.3 to 9 meters in 0.3-meter intervals). SURR. R: Set the distance from the surround right speaker to your normal listening position between 1 and 30 feet in 1.
ENGLISH 20 7 MULTI ROOM SR5500 has features in MULTI ROOM SYSTEM such as source selector, sleep timer, Multi Room Speaker output and remote control. You can set these feature in this sub-menu. 1. Select “ MULTI ROOM ” in the SETUP MAIN MENU with or cursor button, and press the ENTER button.
ENGLISH 21 8 7.1 CH INPUT LEVEL This sub-menu is to adjust the speaker levels for 7.1-channel input sources. Here you will adjust the volume for each channel so that they are all heard by the listener at the same level. 1. Select “ 7.1CH INPUT ” in the SETUP MAIN MENU with the or cursor buttons, and press the ENTER button.
ENGLISH 22 SIMPLE SETUP You can setup the speaker conditions quickly with SIMPLE SETUP menu. In this menu, the number of speakers and speaker delay time can be set. These settings can be changed more detail in “ 2. SPEAKER ” setup menu. Press the SIMPLE SETUP button on the unit to enter this menu.
ENGLISH 23 The signal cannot be converted from the component to the video or S-video. Notes of OSD menu: • The setup menu can be displayed through all video out (COMPONENT, S-VIDEO, VIDEO). • The setting informations (e.g. volume setting) are displayed through all video out when the VIDEO CONVERT function are set ENABLE.
ENGLISH 24 SURROUND MODE The SR5500 is equipped with many surround modes. These are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. The available surround modes may be restricted depending on the input signal and speaker setup.
ENGLISH 25 EX/ES This mode provides 6.1 channel surround for DOLBY DIGITAL EX, DTS-ES encoded source material such as DVD. This mode cannot be used when an analog input has been selected.
ENGLISH 26 The relation between the selected surround mode and the input signal The surround mode is selected with the surround mode selector on SR5500 or the remote control unit. However, the sound you hear is subject to the relationship between the selected surround mode and input signal.
ENGLISH 27 OTHER FUNCTION TV AUTO ON/OFF FUNCTION This function allows the component connected to the TV-VIDEO in jack to control the power (ON/ OFF) to the SR5500. AUTO POWER ON 1. Be sure the TV auto mode is ENABLED. (Refer page 19 : System Setup) 2.
ENGLISH 28 7.1 CH INPUT The SR5500 is equipped for future expansion through the use of Multi channel SACD multichannel player or DVD-Audio player. When this is selected, the input signals connected to.
ENGLISH 29 AUX2 INPUT If you don ’ t need to connect 7.1 Ch. input terminals with multi channel decoder, L(front left) and R (front right) inputs terminals are available as AUX2 input. In this case, You can connect additional audio source to AUX2 as other audio input terminals.
ENGLISH 30 PRESET SCAN (Using the remote control unit) 1. Press the P.SCAN on the remote. “ PRESET SCAN ” appears on the display and then the preset station with the lowest preset number is recalled first. 2. Preset stations are recalled in sequence (No.
ENGLISH 31 CLEARING STORED PRESET STATIONS You can remove preset stations from the memory using the following procedure. 1. Recall the preset number to be cleared with the method described in “ Recalling ” a preset station. 2. Press the MEMO button on the front panel or press the MEMO button on the remote.
ENGLISH 32 MULTI ROOM PLAYBACK USING THE MULTI SPEAKER TERMINALS The SR5500 allows you to connect another set of speakers and place them in a different room or separated area for listening to music. The MULTI ROOM SPEAKER system can not be operated with the supplied remote controller.
ENGLISH 33 TROUBLESHOOTING In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following the user ’ s guide ? 3. Are the power amplifiers and speaker working properly ? If the unit does not operate properly, check items shown in the following table.
ENGLISH 34 TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range ................................ 87.5 - 108.0 MHz Usable Sensitivity ............................ IHF 1.8 µ V/16.4 dBf Signal to Noise Ratio ................... Mono/Stereo 75/70 dB Distortion .
SETUP CODES CD Aiwa ...................................................... 0184 Burmester .............................................. 0447 California Audio Labs ............................ 0056 Carver ......................................... 0184, 0206 Classic .
Crown .................................................... 0207 Curtis Mathes ......... 0074, 0081, 0181, 0478, 0120, 0087, 0729, 0057, 0172, 0193, 1174, 1374 CXC ....................................................... 0207 Daewoo ................... 0478, 1688, 0119, 0699 Denon .
Polk Audio ............................................. 0108 Profitronic .............................................. 0267 Proscan ....................................... 0087, 1087 Pulsar .................................................... 0066 Quasar .
0 8 /2004 00M08BW851250 ecmf-e Printed in China is a registered trademark. www.marantz.com You can find your nearest authorized distributor or dealer on our website. JAPAN Marantz Japan, Inc. 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan U.
デバイスMarantz SR5500の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Marantz SR5500をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMarantz SR5500の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Marantz SR5500の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Marantz SR5500で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Marantz SR5500を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMarantz SR5500の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Marantz SR5500に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMarantz SR5500デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。