Maxon TelecomメーカーSP-140の使用説明書/サービス説明書
ページ先へ移動 of 19
Operating Instructions SP - 130 / 140 Series Synthesized Scanning R adio.
About Your SP-130 / 140 Series Radio Maxon's SP-130 / 140 Series radios feature 4 / 16 channel operation with superior performance and reliability. Operation and functions for Maxon's SP-130 / 140 Series radios are described in this manual. We urge you to thoroughly read this manual before operating the radio.
Table of Contents Safety Information.................................................................. Unpacking Information.......................................................... SP-130 / 140 Series Features........................................
Safety Information The Federal Communications Commission (FCC), with its action in General Docket 79-144, March 13, 1985, has adopted a safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC regulated equipment.
Unpacking Information Remove and carefully inspect the contents of your package(s) for the following items: Radio Battery Pack Antenna Spring Belt Clip Operating Instructions If any items are missing, please contact your Dealer or Maxon.
SP-130 / 140 Series Features • Wideband frequency separation • 1 / 5 Watts programmable output power • Programmable 12.5/25 kHz channel spacing • Channel scan • Priority channel scan • Loo.
Description of Radio Components 1) Antenna Receptacle 2) Channel Selector Knob 3) On/Off - Volume Control 4) Busy/TX/BT Indicator 5) Battery Latch 6) Push-To-Talk (PTT) 7) Monitor Button 8) Option But.
6.
Antenna Installation Fasten the antenna to the radio by turning the antenna clockwise into the receptacle on top of the radio. Installing and Removing the Battery Pack To Install: Position the guides of the battery in line with the radio battery guide rails and slide the battery into position until a click is heard.
Battery Charging and Care To ensure peak performance from your radio, the battery pack must be fully charged. Proper care and charging will allow maximum performance and life of your battery pack. The optional QPA-1135 Pedestal Charger provides a slow overnight charge of 12-16 hours.
SP-130 / 140 Series Operations Power On-Volume Turn the radio on by rotating the on / off - volume control clockwise until you hear a click and the self test "alert" tone.
Power Off When finished transmitting, receiving, monitoring, etc., turn the radio off by rotating the on/off - volume control fully counter-clockwise, to the detent position. Status Indicators and Audible Alert Tones Your SP-130 / 140 Series has a sophisticated microprocessor control which provides a series of audible alert tones.
Scan Modes Scanning is a Dealer programmable feature that allows you to monitor a number of channels. Your Dealer will help you define a channel "scan list" to be programmed into a scan channel (any channel, 1- 4 on model SP-130) or (any channel, 1-16 on model SP-140).
Other Scanning Features • Look Back: Any channel, when not in the scan mode, can be programmed to "look back" at the "Priority" channel.
13 Licensing and Service Information FCC Licensing The Federal Communications Commission requires that the operator of this radio be properly licensed under the applicable Part and / or Parts of the FCC Rules and Regulations. Consult with your Maxon Dealer, or contact the nearest FCC Field Office for information about obtaining a license.
Software Copyrights The Maxon products described in this operating instruction manual may include copyrighted Maxon software programs stored in semi- conductor memories or other media.
Maintenance Your SP-130 / 140 Series Radio is designed to be maintenance free. To keep your radio in good working condition: Clean external surfaces with a clean cloth dampened in a solution of dishwasher detergent diluted in water. Apply the solution sparingly to avoid any moisture leaking into cracks and crevices.
Limited Warranty Maxon America, Inc. ("Maxon") warrants the Maxon Product manufactured by it against defects in material and workmanship under normal use and service for a period of two (2) years from the date of delivery to the original end user, provided that the user has complied with the requirements stated herein.
U.S. P/N: 680-090-2002 Printed in Korea Maxon America, Inc. Business Radio Division 10828 NW Air World Drive Kansas City, Missouri 64153 816 / 891-6320, Ext.
デバイスMaxon Telecom SP-140の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Maxon Telecom SP-140をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMaxon Telecom SP-140の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Maxon Telecom SP-140の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Maxon Telecom SP-140で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Maxon Telecom SP-140を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMaxon Telecom SP-140の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Maxon Telecom SP-140に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMaxon Telecom SP-140デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
