AbocomメーカーFVR206の使用説明書/サービス説明書
ページ先へ移動 of 10
M73 - APO09 - 380 Firewall VPN R outer Quick Install ation Guide.
- 1 - Firewall VPN Router Overview The Firewall V PN Router provides three 10/100Mbit Ethernet network interface ports which are the Internal/LAN, External/WAN, and DMZ port. It also provides an easily operated s oftware WebU I that allows users to set system parameters or monitor network activities using a web browser.
- 2 - Firewall VPN Router supporting protocols The Firewall VPN Router supports all the TCP, UDP and ICMP protocols, such as HTTP, TELNE T , SMTP, POP3, FTP, DNS, PING, etc. System Administrators can set up proprietary protocols according to operating requirements.
- 3 - Connecting Example: Firewall: Internal Port = 192.168.1.1 External Port = x.x.x.x (pr ovided by ISP) DMZ Port = 172.16.1.254 Connection Type: 10/100 Mbps Cable Connection 【 Internal 1 Port 】 = 192.168.1. 3 【 Internal 2 Port 】 = 192.168.1.
- 4 - 【 External Port 】 = 61.11.11.11 【 DMZ Port 】 = 172.16.1.254 Firewall VPN Router Software (management tool) description Firewall VPN Router management tool : WebUI The main menu functions are located on the left - hand side of the screen, and the display window will be on the right - hand side.
- 5 - Quick Setup WebUI Configuration example STEP 1: Connect both the Administrator ’ s PC and t he Internal (LAN) port of the Firewall VPN Router Firewall to a hub or switch. Make sure there is a link light on the hub/switch for both connections. The Firewall VPN Router has an embedded web server used for management and configuration.
- 6 - STEP 2 : Once the Administrator PC has an IP address on the same network as the Firewal l VPN R outer , open up an Internet web browser and type in http://92.168.1.1 in the address bar. A pop - up screen will appear and prompt for a username and password.
- 7 - STEP 3 : After entering the usernam e and password, the Firewall VPN Router WEBUI screen will display. Select the Configuration tab on the left menu and a sub - function list will be displayed. Click on Interface from the sub - function list, and enter proper Layer 3 network setup information.
- 8 - STEP 4 : Click on the Policy tab from the main function menu, and then click on Outgoing from the sub - function list. Click on New Entry button.
- 9 - STEP 5 : The configuration is successful if you see the screen below. Make sure that all the computers that are connected to t he Internal (LAN) port have their Default Gateway IP Address set to the Firewall ’ s Internal IP Address (i.e. 192.
デバイスAbocom FVR206の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Abocom FVR206をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAbocom FVR206の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Abocom FVR206の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Abocom FVR206で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Abocom FVR206を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAbocom FVR206の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Abocom FVR206に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAbocom FVR206デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。