ArchosメーカーARCFlashの使用説明書/サービス説明書
ページ先へ移動 of 12
ARCFlash User’s Manual V4.3 ENGLISH 1 Introduction .................................................................................................................. 3 1.1 Product introduction ........................................................
2 Warranty and Limited Liability This product is sold with a limited warranty and specific remedies are available to the original purchaser in the event the pro duct fails to conform to the limited warranty . Manufacturer’s liability may be further limited in accordance w ith its sales contract.
3 1 Introduction 1.1 Product introduction The ARCFlash is a newly developed mobile storage device for users to exchange and store any data between computers. This device uses Flash Memory as a storage media and connects to y our computer through the USB interface.
4 (Fig 2.1) 2) Plug in the ARCFlash into the computer USB port. The system will automatically detect a new USB device and run the “Add New Hardware Wizard” to assist you in setting up the new device. 3) Inset driver CD into CD-ROM then click “Next” (Fig 2.
5 (Fig 2.5) 7) Click “Next” to finish the procedure. + (Fig 2.6) 8) The system should now detect the hardware and run the “Add New Hardware Wizard” to assist y ou in setting up the new device, fellow the system message to finish the driver installation.
6 2.2.2 Security software installation under Window s Me/2000/XP 1) Turn on the write-protection switch of the ARCFlash before use. The figure “Key” indicates writable and the “Lock” indicates write-protected. 2) There is no driver necessary in Windows ME/2000/XP.
7 (Fig 2.11) The user can set up the password and user name after splitting the ARCFlash into two disks to protect the files in the secure area. (Fig 2.12) Set up your passw ord: Click “Set”, and the “Set & change password” window should appear.
8 Warning: If the user forgets the password, the only so lution is to format this ARCFlash by using the format too l “M-Format”. The ARCFlash will then become one disk again. However, all the data of the ARCFlash will be erased after this procedure.
9 3 M-Format 3.1 Bootable function The ARCFlash provides a particular bootable function. You can use the ARCFlash as a startup disk for your PC to boot the system . However, your BIOS on the main board must support the “USB-ZIP” or “USB-HDD” boot up feature.
10 3.2 Restore factory settings Choose the “Format” option and the click “Execute”. The warning message below should appear. (Fig 3.4) Click the “OK” to start formatting the ARCFlash. After this operation, please re-plug the ARCFlash into y our computer.
11 5 FAQs 1. After the installation is complete, why can’t I find the USB device correctly? Answer: Check USB Controller option in BIOS, make sure it is “Enable”. 2. What is the purpose of the LED indicator ON THE ARCFlash? Answer: When reading or writing the data from/to ARCFlash, the LED will blink to show.
12 7 Technical Support • Only the unit is under warranty and not the accessories • For technical specifications, please s ee the full manual on CD-ROM. • If technical support determines that your product needs to be returned, please contact the place of purchase to have your produ ct repaired or replaced (depending on problem type).
デバイスArchos ARCFlashの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Archos ARCFlashをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはArchos ARCFlashの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Archos ARCFlashの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Archos ARCFlashで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Archos ARCFlashを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はArchos ARCFlashの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Archos ARCFlashに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちArchos ARCFlashデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。