AbocomメーカーM73-APO08-420の使用説明書/サービス説明書
ページ先へ移動 of 20
USB 10/100M FAST ETHERNET Quick Installation Guide M73-APO08-420.
REGULA TOR Y ST A TEMENTS FCC Certification Part15, Class B The United States Federal Communication Commission (FCC) and the Canadian Department of Comm unications have established certain rules governing the use of electronic equipment. FCC Part 15 Registration This device complies with Part 15 of FCC rules.
INTRODUCTIONS The USB 10/100M Fast Ethernet Adapter provides outsid e-the-box plug- and-play local area network connections for USB-ena bled PCs, notebooks an d laptops. This ad apter uses a B type USB port to connect with the USB ho st, and an RJ-45 port to connect with a 10/ 100 Fast Ethernet LAN l ink.
Parts Names and Functions USB Connection Cable: connects the USB host port to t he USB 10/100M Fast Et hernet Adapter. connects to the USB host port 1 3 2 4 6 5 USB-B Port : USB device port. USB Fast Ethernet Adapter Rx/Tx LED indicator: blinks green when the Fast Ethernet Adapter is transmitting/receiving data.
HARDWARE INSTALLATION Precaution Before the installatio n, make sure the USB port exists in your computer and is enabled. To check this, go to My Comp uter Contro l Panel System . Open the Device Manager tab. If the Universal Ser ial Bus contro ller device is found, it means your USB port is in stalled and enabled.
2. Connect another end of the USB connection cable to the d evice port ( USB B ) of your USB 10/100M Fast Ethernet Adapter until it clicks. 3. Connect the UTP cable to the Fast Ethernet Adapter.
SOFTWARE INSTALLATION Installation for Windows 98 1. Once the device is properly connected to your computer, Windows 98 will automatically detect the new h ardware device. Perform the following proced ures for installing the device dri ver. 2. Insert the devi ce driver disk into your floppy drive.
3. The installation program will proceed automatically. Follow the on-screen instruction to finish. 4. When Windows pr ompts you to restar t your com puter, click No to mak e so me changes to your network settings.
5. Go to Start Settings Control Pa nel . Double-click Network . 6. When the Network dialog box appea rs, select USB 10/100M Fast Ethernet and click Add . Set the ap propriate protocol s and client for you nee ds. When complet ed, click OK . 7.
Adapter is found, it means that your device is properly installe d and enabled. Installation for Windows 2000 1. Once the device is well connected t o your computer, Windows 2000 will au tomatically detect the new device.
2. Select Search for a suitable driver for my device (recommended) and click Next . 3. Insert the new device drive r to the disk d rive. Select Floppy disk drives . Click Next . 4. Clic k Next . Windows will copy all the necessary files to your system.
7. Go to Start Settings Control Panel Network and Di al-up Connections . Double-click Local Area Connections . 8. Whe n the Network dialog box appears , select USB 10/100 Network Adapter and click Install . Set the appropriate protoc ols and client for you need s.
9. Remem ber to restart your computer to activate the new device. Setup Diagnostics To verify if the device exists in your com puter and is enable d, go to Start Settings Control Panel System Hardware.
3. Clic k Next to continue. 4. Clic k Next . Windows will copy all the necessary files to your system. - 12 -.
5. Clic k Finish to complete the software installation. 6. When aske d if you want to restart your computer, click No to continue the Network configuration.
click Add . Set the ap propriate protocol s and client for you nee ds. When complet ed, click OK . 9. Rem ember to restart your computer to activate the new device. Setup Diagnostics To verify if the device exists in your com puter and is enable d, go to Start Settings Control Panel System.
2. Insert the device Driver Disk into the floppy disk drive of your system . Select Search removable media (floppy, CD- ROM…) and click Next. 3. Clic k Next to continue.
4. W indows will start searching for the appropriate driver for the installation. When the scre en appears as below, click Continue Anyway to proceed. 5. Wait for seconds whi le Windows copies the appropriate driver to your sy stem. 6. Clic k Finish. The software installation for this network device is now com pleted.
7. Go to Start Settings Cont rol Panel Network and Dial-up Connec tions . Double-click Local Area Connections . 8. When the Network dialog box appea rs, select USB 10 /100 Network Ad apter.
click Install . Set the appropriate protocols and client for you nee ds. When complet ed, click OK. 9. Rem ember to restart your computer to activate the new device. Setup Diagnostics To verify if the device exists in your com puter and is enabled, go to Start Contr ol Panel System .
デバイスAbocom M73-APO08-420の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Abocom M73-APO08-420をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAbocom M73-APO08-420の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Abocom M73-APO08-420の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Abocom M73-APO08-420で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Abocom M73-APO08-420を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAbocom M73-APO08-420の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Abocom M73-APO08-420に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAbocom M73-APO08-420デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
