Meridian Americaメーカー598の使用説明書/サービス説明書
ページ先へ移動 of 87
Meridian 598 DVD Audio Player user guide.
i Preface Meridian 598 DVD Audio Player User Guide.
Preface ii Sales and service in the UK Meridian Audio Ltd Stonehill Stukeley Meadows Cambs PE29 6EX England Tel (01480) 445678 Fax (01480) 445686 World Wide Web http://www.
iii Preface Contents Introduces the 598 DVD Audio Player, and gives examples of two suggested configurations using it in conjunction with other Meridian products. Provides step-by-step instructions on operating the DVD player, using either the front panel or the Meridian System Remote.
Preface iv Explains how to configure the DVD player to suit the other equipment in your system. Explains how to set up the default options using the DVD player ’ s Setup menu. Describes how to unpack and install the DVD player. Configuring disc options 33 Setting default options .
v Preface Provides suggested solutions to typical problems. Troubleshooting 65 General operating problems .................. 66 Audio problems ...................................... 68 Video problems ...................................... 69 Maintenance .
Preface vi.
Intr oduction T he 598 DVD Audio Player combines Meridian’s extensive experience of producing audiophile CD players with their close involvement in the development of DVD formats, resulting in an outstanding DVD player that takes full advantage of the capabilities of DVD-Video, DVD-Audio and CD.
2 Introduction The design philosophy of the Meridian 598 DVD Audio Player is simply to deliver the highest possible quality audio and video signals from every format of DVD and CD.
Introduction 3 DVD-Video The multi-channel soundtracks on DVD-Video discs are encoded and compressed, using the Dolby Digital, MPEG, or DTS encoding systems. The 598 DVD Audio Player uses mathematically precise digital signal processing (DSP) to decode the soundtrack into discrete channels.
4 Introduction The Meridian 500 Series The Meridian 500 Series is a unique system of digital, analogue, and video components designed to meet the demand for absolute quality, ease of use, and lasting value.
Introduction 5 Sample configurations 598 DSP5500HC 568.2 DSP6000 DSP6000 DSP6000 DSP6000 The Meridian 568 Digital Surround Processor can connect to the 598 using the Meridian Smart Link, giving full multi-channel reproduction from DVD-Audio discs.
6 Introduction By careful design Meridian have achieved a sound quality with audio CDs which approaches that of their dedicated CD players. 598 DSP5000 DSP5000 The 598 DVD Audio Player can be connected directly to Meridian DSP loudspeakers, as these include DSP volume and tone controls.
Introduction 7 Specification and accessories Specification Audio outputs 1 x digital coax SPDIF/IEC1937/MHR (digital version) for two-channel up to 96kHz, 24-bit Dolby Digital (AC-3), or DTS bitstreams. 3 x digital coax for multi-channel. 1 x Meridian Smart Link SVGA connector providing six-channel PCM.
8 Introduction Mechanism Dual-lens pickup with red laser and 5- axis motor. Power Universal supply 100-240V, 50-60Hz, 25W. Normally off automatic low-noise fan cooling. Finish Black textured enamel and glass. Dimensions 321mm x 88mm x 332mm (12.64" x 3.
Using the DVD player T his chapter provides a summary of the functions of the DVD player in order to identify the controls which you use to operate the unit. It also describes the basic aspects of using the DVD player to play DVD- Video, DVD-Audio, and audio CDs.
Using the DVD player 10 Fr ont panel 1 Open Opens and closes the disc tray. 2 > (Play) Plays a selected chapter/ track. 3 * (Stop) Stops the disc. 4 = (Pause) Pauses the disc. 5 Display Selects the information displayed. 6 [ (Previous) Selects the previous chapter/track.
Using the DVD player 11 Meridian System Remote Subtitle Off Enter Return Function 0T op Menu # Record Slow/Page ] OSD [ Page Angle Audio A-B Phase Setup Band 789 456 123 Menu V olume Display Mute DSP .
Using the DVD player 12 Switching on and of f When not playing, the DVD player should be left in the standby state. This uses a minimal amount of electricity, but ensures that the components of the DVD player operate at maximum efficiency from the moment you start.
Using the DVD player 13 Playing a disc Most DVDs start playing automatically when you close the tray. Some DVDs are double-sided, and need to be turned over during play. DVD-Audio discs usually behave differently depending on whether you start them by closing the tray, or pressing > .
Using the DVD player 14 To move to the next or previous chapter or track ● Press ] or [ (front panel or remote). The on-screen display shows or . Note: These functions are normally disabled while the disc ’ s copyright notice is being displayed. To move to the next or previous album (MP3 discs only) ● Press V or A (remote).
Using the DVD player 15 The Meridian 598 DVD Audio Player allows you to take full advantage of all the benefits provided by DVD-Audio discs, including one or more of the following features: ❍ Higher-quality audio up to 24 bit, 192kHz. ❍ Longer playing times.
Using the DVD player 16 DVD-Video compatibility To allow them to be played on DVD-Video players with no DVD- Audio capability, some DVD-Audio discs provide one or more groups with the content recorded in DVD-Video format; typically AC-3 or DTS.
Using the DVD player 17 Normally, DVD-Video discs are divided into one or more titles, and the titles are subdivided into chapters. Audio CDs are divided into tracks. The DVD player allows you to play an entire disc, or start playing from any chapter or track number.
Using the DVD player 18 To locate a title by number ● Press # ( Function Top Menu on the remote). The on-screen display prompts you to enter the title number: ● Enter the title number using the number keys (remote). ● Press > or Enter (remote) to play from the title number you have specified.
Using the DVD player 19 To step forward frame by frame If you are playing a DVD-Video disc you can step forward, frame by frame, while it is paused: ● Press = (front panel or remote). The on-screen display shows . To continue after pausing ● Press > (front panel or remote).
Using the DVD player 20 You can display information about a disc on the front panel or on-screen display. To change the front panel display ● Press Display (front panel, or remote if the 598 is controller). The display will step between the following options: Display Example Title and chapter numbers (DVD-Video disc) or track number (audio CD).
Using the DVD player 21 Audio CD Track number Elapsed disc time Repeat mode Play mode DVD-Audio 1 Group number Track number Elapsed group time Play mode DVD-Audio 2 Number of channels Soundtrack numbe.
Using the DVD player 22.
Advanced featur es T his chapter describes the more advanced features of the 598 DVD Audio Player. These features are not essential if you simply want to enjoy DVDs or audio CDs, but they allow you to take full advantage of the range of options available with the DVD format.
24 Advanced features DVDs generally provide a Top Menu, which provides access to the content on the disc. Many DVD-Video discs also provide a disc menu, which allows you to select additional sections or special options. To select a title or group using the Top Menu ● Press Top Menu to display the Top Menu on the screen.
Advanced features 25 You can play back DVD-Video discs faster than normal, at between twice and eight times normal speed, or in slow motion, at between one-half and one-sixteenth of normal speed. You can also play back audio CDs faster than normal. Note : The sound is muted when playing back DVD-Video discs faster or slower than normal.
26 Advanced features ● Press A-B again at the end of the section. The on-screen display shows A–B : The DVD player automatically returns to the start of the section and plays it back repeatedly. To cancel the repeat press A-B a third time. Playing r epeatedly You can play back a specified title, chapter, track, or section of a disc repeatedly.
Advanced features 27 Selecting an audio soundtrack To select the audio setting ● Press Audio ( Function > ). Each time you press Audio the next available soundtrack is selected. To switch between stereo and multi- channel (DVD-Audio) Some DVD-Audio discs allow you to switch between stereo and multi-channel.
28 Advanced features Many DVD-Video discs include subtitles in up to 32 different languages. While you are playing a disc you can turn the subtitles on or off, and select the subtitle language from those provided on the DVD-Video disc.
Advanced features 29 Selecting the camera angle Some DVD-Video discs include scenes recorded from up to nine different camera angles, and you can select the camera angle while you are playing the disc. To display the camera angle ● Press OSD ( Function ] ) to display the first on-screen display bar.
30 Advanced features Setting the par ental lock Some DVD-Video discs are provided with a parental lock function to allow you to lock out playback of scenes whose content exceeds a specified rating until a password is entered. To set the parental lock ● Press Setup ( Function Menu ) while the disc is stopped.
Advanced features 31 Initially the password is set to 7890, but you can change it to any password you choose as described in To change the password, opposite .
32 Advanced features.
Configuring disc options DVD-Video discs are capable of providing a wide range of options and special features. This chapter explains how to use the options on the Setup menu to configure the operation of the 598 DVD Audio Player. The options described in this chapter are only available using the Meridian System Remote.
34 Configuring disc options The default options are divided into the following five menus of settings: Menu Description Playback options The audio, subtitle, and menu languages, and the parental rating. Video setup The display settings. Audio setup The audio settings.
Configuring disc options 35 To select an option from a menu ● Press A or V to highlight the option you want: ● Press Enter to select the option. To return to the previous menu ● Press Return .
36 Configuring disc options The Playback options menu lets you change the default language for the audio soundtrack, subtitles, and on-screen menus, and the parental rating: To select the default soundtrack language Most DVD-Video discs include a selection of soundtrack languages.
Configuring disc options 37 ● Highlight Subtitles in the Playback options menu, and press Enter . The Subtitle language menu is displayed: ● Press < , > , A , or V to highlight the language you want to use, and press Enter .
38 Configuring disc options The Video setup menu lets you change the video and operational settings of the 598 DVD Audio Player: If your 598 has the progressive output or SCART options, additional men.
Configuring disc options 39 To select the video output format This option should be set according to which of the S-video or COMPONENT video outputs you are using. ● Highlight Video output in the Video setup menu, and press Enter . The Video output menu is displayed.
40 Configuring disc options Choose CVBS or S to provide a composite video or S-video signal to the SCART socket. S-video is also available on the S-VIDEO OUT socket. Choose RGB , Y , or EURO to provide the corresponding component video, and composite video on the SCART socket.
Configuring disc options 41 If you are using the 598 DVD Audio Player to play both NTSC and PAL material the recommended setting is O IRE . To select closed caption subtitles Some DVD-Videos include closed caption subtitles, which provide a description of sound effects for the hard of hearing; for example “ door creaks ” .
42 Configuring disc options ● Press V or A to highlight the option you want, and press Enter . Choose Auto if your television can display both PAL and NTSC video, or choose NTSC or PAL to match the format supported by your television.
Configuring disc options 43 The Pause timeout automatically switches the 598 from pause into stop mode if no key is pressed for the specified time. ● Highlight Stop timeout or Pause timeout in the Screensaver options menu, and press Enter . The appropriate menu is displayed: ● Press V or A to select the timeout delay, and press Enter .
44 Configuring disc options The Progressive output menu is displayed: ● Press A or V to highlight the option you want, and press Enter . The Gamma correction affects the display brightness, and can be set to 1.0, 0.8, 0.9, or 1.1. The Sharpness can be set to Off , Low , Medium , or High .
Configuring disc options 45 SCART switch The SCART settings menu allows you to configure how the 598 controls the SCART switch output (pin 8), which usually switches a television or monitor to display.
46 Configuring disc options The Audio setup menu lets you select the audio settings of the 598 DVD Audio Player: To select the digital audio format This option allows you to specify whether you want the 598 DVD Audio Player to decode bitstreams, such as Dolby Digital or DTS, to PCM on specified outputs.
Configuring disc options 47 To specify the maximum sampling rate This option allows you to specify the maximum decoding rate that the equipment connected to each set of outputs can accept, ● Highlight Max rate in the Audio setup menu, and press Enter .
48 Configuring disc options The following menu is displayed: ● Press V or A to highlight the option you want, and press Enter . If you are connecting either of the outputs to a Meridian product that is MHR compliant, such as the 568, select the option for the corresponding output to take advantage of the MHR.
Configuring disc options 49 To specify Dolby Digital compression This option is useful for reducing the dynamic range of Dolby Digital soundtracks, such as when watching a film late at night. ● Highlight DD compression in the Audio setup menu, and press Enter .
50 Configuring disc options Region codes For commercial reasons many DVDs are encoded with one or more region codes to identify the countries in which they can be used.
Setting up the DVD player T his chapter explains how to install the DVD player. It describes what you should find when you unpack the DVD player, how you should connect it to your other audio equipment, and the siting constraints.
Setting up the DVD player 52 Unpacking The 598 DVD Audio Player comes in a box containing the following components: ❍ Meridian 598 DVD Audio Player. ❍ Meridian System Remote. ❍ Meridian comms lead. ❍ Power cord. ❍ This manual. If any of these items are missing please contact your dealer.
Setting up the DVD player 53 Positioning the DVD player Safety warnings ❍ Do not expose the unit to dripping or splashing. ❍ Do not place any object filled with liquid, such as a vase, on the unit. ❍ Do not place naked flame sources, such as lighted candles, on the unit.
Setting up the DVD player 54 Back panel Component version MERIDIAN COMMS RS232 Y/G S COMPOSITE VIDEO OUT Pr/R Pb/B OFF ON SURROUND L/R C/SUB AUX DIGIT AL OUT SMART LINK DIGIT AL OUT MERIDIAN CONNECTIO.
Setting up the DVD player 55 SCART version Use this output To connect to this SCART OUT RGB, S-video, or composite video inputs, depending on the option selected in the Video output menu. SA monitor or television with an S-video input, or a Meridian 562V.
Setting up the DVD player 56 Use this output To connect to this AUX DIGITAL OUT A surround processor such as the Meridian 561 Digital Surround Processor, a digital preamplifier such as the Meridian 562V, or Meridian DSP loudspeakers. SMART LINK A surround processor such as the 568.
Setting up the DVD player 57 Connecting using component video Video lead 598 DVD Audio Player COMPONENT VIDEO COMPONENT VIDEO IN T elevision If your television, monitor, or projection system includes component video inputs, these will give the highest possible quality from DVD-Videos.
Setting up the DVD player 58 To connect to a Meridian 568.2 or 861 Digital Surround Processor (digital version) 568.2 Digital Surround Pr ocessor 598 DVD Audio Player SVGA lead SMART LINK SMART LINK ● Connect the SMART LINK output on the 598 to the SMART LINK input on the 568.
Setting up the DVD player 59 To connect to a processor with analogue multi-channel inputs (analogue version) Surround Pr ocessor 598 DVD Audio Player ANALOGUE OUTPUTS 6 x Phono leads ANALOGUE OUTPUTS .
Setting up the DVD player 60 To connect to other Meridian 500 Series equipment ● Connect one of the COMMS sockets on the back panel of the DVD player to one of the COMMS sockets on another 500 Series unit, using the 500 comms lead provided with the 598 DVD Audio Player.
Configuring the DVD player M any advanced aspects of the 598 DVD Audio Player can be configured to alter the way it operates with the other Meridian equipment in your system. These settings are initially set to standard values, which are suitable for most situations, and this chapter describes how to restore the standard settings.
Configuring the DVD player 62 Choosing standar d settings The DVD player provides four standard settings, called Types, which configure the 598 into the most commonly needed configurations. Choosing one of the four Types overrides any other configuration you may have performed, and so can be used to reset the configuration of the unit.
Configuring the DVD player 63 Configuring the 598 DVD Audio Player To configure specific options ● Highlight Meridian setup in the Setup menu, and press Enter .
Configuring the DVD player 64 To configure the sources If you are using the 598 DVD Audio Player as the controller in your Meridian system, you can use the Source config option on the Meridian Setup menu to configure each of the sources in your system.
Troubleshooting 65 Tr oubleshooting T his chapter provides suggested solutions to typical problems that may occur when setting up or using the DVD player. If you are still not able to resolve a difficulty with the help of this guide and the suggestions in the following pages, please contact your Meridian dealer or Meridian Audio Ltd.
Troubleshooting 66 General operating pr oblems No lights are displayed when switching on ❍ Check that your AC power supply is connected correctly. ❍ Check that the ON/OFF switch on the back panel is in the ON position.
Troubleshooting 67 There is interference on the radio and/ or television when the DVD player is switched on Before following the steps below, ensure all units are switched off.
Troubleshooting 68 Audio problems Creating MP3 discs MP3 discs can be created from a computer using appropriate MP3 encoding software and a CD-ROM writer. Generate the MP3 files with a data rate of at least 128Kbits per second. Group the tracks into folders to create separate albums on the disc.
Troubleshooting 69 The video picture is monochrome If you are using the S-Video output, make sure that S is selected in the Video output menu Otherwise, check your video cabling.
Troubleshooting 70 Cleaning When cleaning the DVD player bear in mind that the front of the DVD player is plastic, and the display panel and lid are glass. Disconnect the power cord before cleaning the unit. Note: Do not use abrasive cleaners on any part of the DVD player.
Troubleshooting 71 Service and guarantee Guarantee The 598 DVD Audio Player is guaranteed against defects in material and workmanship for two years from the date of purchase.
Troubleshooting 72.
Glossary 73 Glossary Dolby Digital A digital surround sound which provides five full-frequency range channels (left, centre, right, left surround, and right surround) and an additional Low Frequency Effects (LFE) channel which is band limited to 120Hz.
Glossary 74 DVD-Audio A DVD containing audio tracks in one or more of a number of alternative formats to provide higher quality or higher capacity than CD, multi-channel audio, together with the option of still images or video.
Glossary 75 OSD On-screen display, which the 598 can superimpose on the video image to give information about the disc. PCM Pulse Code Modulation, the method used to encode music digitally, as used on audios CDs. Source An input to the system, such as CD or TV.
Glossary 76.
77 Index Index A A-B (remote) 26 accessories 8 advanced features 23 ANALOGUE OUT 56 audio CDs 17 on-screen display 21 audio connections 55, 58 Audio language menu 36 audio settings selecting 27 Audio .
Index 78 L language screen displays 37 soundtracks 36 subtitles 36 letterbox format 38 M maintenance 70 maximum sampling rate, specifying 47 Menu key 24 Menu language menu 37 Meridian 500 Series 4 Meridian 500 Series operation, setting 60 Meridian 568.
79 Index SCART output 55 switching 44, 64 screensaver timeouts 42 service 71 Setup menu 34 slow-motion play 25 SMART LINK DIGITAL OUT 56 soundtracks default language 36 selecting 27 Source configurati.
Index 80.
デバイスMeridian America 598の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Meridian America 598をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMeridian America 598の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Meridian America 598の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Meridian America 598で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Meridian America 598を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMeridian America 598の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Meridian America 598に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMeridian America 598デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。