Mieleメーカー09 290 840の使用説明書/サービス説明書
ページ先へ移動 of 48
Operating and installation instructions Freezer F 12016 S-2 F 12020 S-2 F 12020 S-3 To avoid the risk of accidents or damage to the appliance, it is essential to read these operating instructions before it is installed or used for the first time. M.-Nr.
Guide to the appliance .............................................4 Caring for the environment ..........................................6 Warning and Safety instructions .....................................7 How to save energy ....................
Ventilation gaps ...................................................2 9 Door seal ........................................................2 9 Problem solving guide ............................................3 0 Noises ................................
a On/Off button b Super freeze button c Display If the appliance is not operated for some time, the display will revert automatically to the brightness level which has been set. As soon as a button is pressed the display will light up at the brightest setting.
a Freezer drawers Guide to the appliance 5.
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and should be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children.
This appliance complies with all relevant safety requirements. Improper use can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time.
Technical safety ~ Before setting up the appliance, check it for any externally visible damage. Do not install and use a damaged appliance. It could be dangerous. ~ If the connection cable is faulty it must only be replaced by a service technician authorised by the manufacturer to protect the user from danger.
~ The electrical safety of this appliance can only be guaranteed when it is correctly earthed. It is most important that this basic safety requirement is observed and tested regularly, and where there is any doubt, the household wiring system should be inspected by a qualified electrician.
Correct use ~ The appliance is designed for use within certain climate ranges (ambient temperatures), and should not be used outside this range. The climate range for your appliance is stated on the data plate inside the appliance. Installing it in a room with too low an ambient temperature, e.
~ Do not operate any electrical equipment (e.g. an electric ice-cream maker) inside the appliance. Danger of sparking and explosion. ~ Do not use sharp edged objects to – remove frost and ice, – separate frozen foods or remove ice trays. They will damage the evaporator, causing irreversible damage to the appliance.
Normal energy consumption Increased energy consumption Installation site In a ventilated room. In an enclosed, unventilated room. Protected from direct sunlight. In direct sunlight. Not near to a heat source (radiator, oven). Near to a heat source (radiator, oven).
Normal energy consumption Increased energy consumption Use Drawers, shelves and racks arranged as they were when the appliance was delivered. Only open the doors when necessary and for as short a time as possible.
Before using for the first time ^ Clean the inside of the appliance and the accessories with lukewarm water and a little washing-up liquid, and then dry with a soft cloth.
Settings mode X Certain settings on the appliance can be changed using Settings mode. The brightness of the display can be altered ^ The lock can be activated or deactivated c Settings mode is represented in the display by the Menu symbol X . The following section describes how to access Settings mode and alter settings.
^ Press the temperature selector button repeatedly until the brightness level required is reached: ^1 : dimmest setting ^5 : brightest setting. ^ Press the Super freeze button briefly to confirm your selection. The newly selected setting has been saved.
– To deactivate the Lock ^ Press the Super freeze button for approx. five seconds. The Menu symbol X will light up and c will start flashing in the display. Settings mode is now activated. ^ Press the Super freeze button briefly to call up the Lock function.
It is very important to set the correct temperature for storing food in the appliance. Micro-organisms will cause food which is not stored at the correct temperature to deteriorate rapidly. Temperature influences the growth rate of these micro-organisms.
Temperature range The temperature can be adjusted from: -14 °C to -28 °C The ambient temperature in the room and the installation location can affect the time it takes for the appliance to reach the lowest temperature. If the ambient temperature is too high, the appliance may not reach the lowest temperature.
Your appliance has been fitted with a warning system which ensures that the temperature in the freezer cannot rise unnoticed. Temperature alarm If the temperature in the freezer becomes too warm, an alarm will sound. At the same time the temperature display and the Alarm symbol ; will flash.
Switch on Super freeze before putting fresh food into the freezer. This helps food to freeze quickly and retain its nutrients, vitamins, flavours and appearance. Super freeze is not necessary: – when placing food in the freezer that is already frozen.
Maximum freezing capacity To ensure that fresh food placed in the freezer freezes through to the core as quickly as possible, the maximum freezing capacity must not be exceeded. The maximum freezing capacity for freezing within a 24-hour period is given on the data plate: "Freezing capacity .
Home freezing Only freeze fresh food which is in a good condition. Hints on home freezing – The following types of food are suitable for freezing: Fresh meat, poultry, game, fish, vegetables, herbs, fresh fruit, dairy products, pastry, leftovers, egg yolks, egg whites and a range of pre-cooked meals.
Before placing food in the freezer ^ When freezing more than 1 kg of fresh food, switch on the Super freeze function for some time before placing the food in the freezer (see "Super freeze"). This helps food that is already in the freezer to stay frozen.
Defrosting Frozen food can be defrosted in different ways: – in a microwave oven, – in an oven using the "Fan" or "Defrost" setting, – at room temperature, – in the refrigerator (the cold given off by the frozen food helps to keep the other food cold), – in a steam oven.
In normal use, ice and frost will form in the freezer, e.g. on the internal walls. How much ice and frost accumulates in the appliance will depend on the following: – whether the appliance door has been opened frequently or left open for a while. – whether a large quantity of fresh food has been placed in the freezer at once.
To defrost Carry out the defrosting procedure as quickly as possible. The longer the food is left out at room temperature, the faster it defrosts. Do not use a steam-cleaning appliance to aid the defrosting process. Steam could reach electrical components and cause a short circuit.
Make sure that no water can penetrate into electronic unit or into the ventilation gaps. Do not use steam cleaning apparatus to clean the appliance. Steam could reach electrical components and cause a short circuit. Th e data plate located inside the appliance must not be removed.
Appliance door, side panels Remove any soiling from the appliance door and side panels im - mediately. If this is not done, it might become impossible to remove and could cause the surface to alter or discolour. All surfaces are susceptible to scratching.
Some minor problems can be corrected without contacting Miele. If having followed the suggestions below, you still cannot resolve the problem, please contact Miele. To prevent unnecessary loss of temperature it is advisable not to open the door while waiting for the appliance to be serviced.
Problem Possible cause Remedy The temperature inside the appliance is too low. ^ Set a warmer temperature. The Super freeze function is still switched on. The Super freeze function switches itself off automatically after approx. 30 - 65 hours. You can switch off the Super freeze function earlier to save energy: ^ Press the Super freeze button.
Problem Possible cause Remedy The compressor runs continuously. To save energy, the compressor runs at a lower speed, but for longer, when less cooling is required. Super freeze is switched on. Food is frozen rapidly, preserving nutrients, vitamins and flavour.
Problem Possible cause Remedy The Alarm symbol ; flashes. The temperature inside the appliance is too low. – The door has been opened too frequently. – A large amount of fresh frood has been put in at once for freezing without switching on the Super freeze function.
Problem Possible cause Remedy The external side panels of the appliance feel warm. The warmth created by the evaporator is used to prevent condensation. Food has frozen together. ^ Use a blunt instrument, e.g. a spoon handle or plastic scraper, to prise it apart carefully.
Normal noises What causes them Brrrrr... Humming noise made by the motor (compressor). This noise can get louder for brief periods when the motor is switching on. Blubb, blubb.... A gurgling noise can be heard when coolant is circulating through the pipes.
In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your appliance.
Demo mode r The appliance can be demonstrated in the showroom or at exhibitions in "Demo mode". In this mode the display and the controls are functioning but the compressor remains switched off. Demo mode is represented in the display by the r symbol.
Electrical connection U.K. All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). The appliance is supplied with a mains cable and moulded plug ready for connection to an a.
Do not place any appliance which gives off heat, such as a toaster or microwave oven, on top of this appliance, as this would increase the appliance's energy consumption. This appliance must not be installed directly next to another refrigerator or freezer.
Ventilation Air at the back of the appliance gets warm. To ensure sufficient ventilation, the ventilation gaps must not be covered or blocked in any way. They should be dusted on a regular basis. Appliances with wall spacers supplied Fitting the wall spacers supplied onto the back of the appliance assists in attaining lower energy consumption.
Appliance dimensions ABCD E F F 12016 S-2 850 mm 555 mm 611 mm 624 mm 1174 mm 595 mm F 12020 S-2 850 mm 600 mm 611 mm 624 mm 1174 mm 640 mm F 12020 S-3 850 mm 600 mm 646 mm * 665 mm * 1209 mm * 640 mm * Measurement with wall spacers fitted. If the wall spacers are not fitted, the measurement is reduced by 35 mm.
The appliance is supplied right hand hinged. If left hand door hinging is required, follow the instructions below. ^ Close the door. ^ Unscrew lower hinge bracket a , and remove. ^ Then lift the door down and off. ^ Take hinge pin b out of hinge bracket a , then refit in the other hole of the hinge bracket.
Changing over the door handle ^ Carefully remove cover a and stoppers b from the sides using a flatheaded screwdriver. ^ Slide cover c over to the left and then insert a suitable plastic or wooden tool d into the gap on the right hand side. ^ Carefully lever cover c out.
* For appliances supplied without wall spacers or without the wall spacers fitted, this measurement is reduced by 35 mm. a Top box b Appliance c Housing unit d Wall The appliance can be installed in a kitchen run. To match the height of the rest of the kitchen, the appliance can be fitted with a suitable top box a .
45.
46.
47.
Alteration rights reserved / 1212 F 12016 S-2, F 12020 S-2, F 12020 S-3 M.-Nr. 09 290 840 / 01.
デバイスMiele 09 290 840の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Miele 09 290 840をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMiele 09 290 840の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Miele 09 290 840の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Miele 09 290 840で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Miele 09 290 840を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMiele 09 290 840の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Miele 09 290 840に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMiele 09 290 840デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
