MieleメーカーCVA5065の使用説明書/サービス説明書
ページ先へ移動 of 84
Operating and installation instructions Built-in coffee machine for connection to mains water supply CVA 5065 To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time.
Caring for the environment ..........................................5 Guide to the machine ..............................................6 Accessories supplied ..............................................8 Optional accessories .....................
Settings: Customising your machine ................................2 7 Settings menu ....................................................2 7 Selecting the language .............................................2 8 Setting the time of day ..............
Cleaning and care ................................................4 9 Quick guide ......................................................4 9 Rinse the system ..................................................5 1 Milk pipework ..........................
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and should be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children.
Exterior view a On/Off sensor for switching the coffee machine on and off b Display c Left arrow, for scrolling through the various programme options d OK sensor, for confirming the selection of a pro.
Interior view a Master switch b Ground coffee chute cover c Ground coffee chute d Slide control to select fineness of ground coffee e Coffee bean container f Drip tray with grid for easier carrying g .
Stainless steel milk flask For storing and keeping milk cold, with lid (with handle) and additional cap ( not suitable for cleaning in a dishwasher) Containers Large and small containers for cleaning .
Miele accessories and cleaning and conditioning products are available for your coffee machine. These can be ordered via the internet at www.miele-shop.
This coffee machine conforms with all relevant legal safety requirements. Improper use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the machine, please read these instructions carefully before using it for the first time.
Safety with children , Caution. The spouts present a danger of burning or scalding. Children's skin is very sensitive and reacts to hot temperatures. Do not allow them to touch hot components of the coffee machine or to put their hands under the spouts.
~ The second electrical connection socket on the back of the CVA 5060 coffee machine may only be used for connecting a Miele EGW 4000-14, EGW 4000-29 or EGW 5000-14 plate warmer. Otherwise the machine will be damaged. ~ If the coffee machine is installed behind a furniture door, it must not be used with the door closed.
~ The machine must be disconnected from the electricity supply during installation or repair work. ~ Do not open the outer casing of the machine. Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults.
~ Please note the following regarding water: – Only use cold, fresh tap water to fill the water container. Warm or hot water or other liquids could damage the machine. – Change the water every day to prevent a build-up of bacteria. – Do not use mineral water.
~ The machine must not be used for cleaning objects. ~ Only use the descaling tablets supplied by Miele and follow the instructions on the packet carefully. Use the exact proportions recommended. Otherwise the machine will be damaged. ~ Depending on the natural oil content of the coffee used, the brew unit could become blocked.
The following notes should help you get to know your coffee machine before starting to use it. Controls This machine has sensor controls which react to touch.
When you use the machine for the very first time , you will be prompted to select a language . ^ Use the right or left arrow until the language you want appears in the display. ^ Touch the OK sensor. The language you have chosen is now set. The request to set the clock format will then appear.
The coffee machine must be cleaned thoroughly (see "Cleaning and care") before you fill it with water and coffee beans. It is vital that you programme in the water hardness level of your water (see "Settings: Customising your machine - Setting the water hardness").
Filling the coffee bean container Only put roasted espresso or coffee beans in the container. Anything else, including ground coffee, will damage the grinder. Do not use coffee beans which have been treated with caramel, sugar or other substances. Do not put drinks containing sugar, or instant coffee in the machine.
Switching on When you switch the coffee machine on it will start heating up and the pipework will be rinsed through. This cleans and pre-heats the pipework in preparation for making coffee.
Adjusting the height of the central spout The height of the central spout can be adjusted to suit the height of the cup so that the drink will not cool down as quickly as it would if the spout were further away from the cup. The crema will also be a better quality if the coffee does not have so far to go! ^ Slowly pull the central spout downwards.
Double portion If you want to dispense a double portion of coffee or espresso or to dispense two portions at the same time: ^ touch the OK sensor a second time whilst "2 portions?" is in the display. The two portions will be dispensed one after the other .
If you not added any ground coffee, you must select "No". Otherwise the machine will assume that there is ground coffee in the chute, and only water will be dispensed the next time coffee is made! To make a drink ^ Place a cup under the central spout.
To make drinks with milk, ^ place the lid on the stainless steel milk flask by twisting it anticlockwise until it locks into place. ^ Open the machine door and hang the milk flask in the machine as illustrated, ensuring that the milk pipework is correctly engaged.
User profile drinks The User profile function is used to select the quantity of water and milk for your drink, as well as the fineness of the ground, temperature and pre-brewing to suit your taste and that of your guests (see "Setting up user profiles").
A good espresso or coffee with a thick, even crema depends not only on the quality, pressure and temperature of the water and the quality of the coffee beans, but also on the quantity of beans and how finely they are ground. The crema should have an even nut-brown colour with dark stripes running through it.
It is easy to customise your machine to suit your exact requirements. Settings menu To select the various programme options: Settings F qr HI J L n m C ^ Touch the right arrow sensor until "Settings F " appears in the display, and then touch the OK sensor.
Water hardness: soft 1, medium 2, hard 3, very hard 4 Display: Contrast, Brightness Volume: Buzzer tones, Keypad tone Plate warmer: Automatic, On, Off Plumbed in water supply: On, Off Showroom prog.: Demo programme, Off Factory default: All settings can be reset to the factory default, and user profiles deleted.
Setting the time of day ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Settings Time of day Timer ^ Touch the right arrow sensor until "Time of day" is highlighted and touch the OK sensor. There are three options: Display The Time of day display can be switched on or off.
Setting the timer ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Settings Timer Coffee jug ^ Touch the right arrow sensor until "Timer" is highlighted and touch the OK sensor. ^ Select "Set" with the arrow sensors and touch the OK sensor.
^ First set the hour with one of the arrow sensors. Touch the OK sensor. ^ Then use the arrow sensors to set the minutes. Touch the OK sensor. The machine will now switch off after the time you have set.
Coffee jug (making several cups one after the other) This function can be used to make up to 8 cups of coffee automatically one after the other (max. 1 l). ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Settings Coffee jug Prog.
^ Use the arrow sensor to select the drink that you wish to set the amount of coffee for and then touch the OK sensor. ^ Use the arrow sensor to set the amount to "more" or "less".
^ Use the arrow sensors to highlight the temperature option. ^ Touch the OK sensor to save the setting. Setting Automatic rinsing The pipework is rinsed through automatically when the coffee machine is switched off if the automatic rinsing function is switched on and the coffee machine has been used for preparing drinks.
Lighting: Setting the brightness You can set how bright the lighting should be on the machine: ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Settings Lighting Info ^ Touch the right arrow sensor until "Lighting" is highlighted, and then touch the OK sensor.
Info (showing the number of drinks) The "Info" option enables you to check how many drinks the machine has already dispensed or how many you can still dispense before it has to be descaled. ^ Select "Settings F " from the Main menu, and then touch the OK sensor.
To override the System lock ^ Touch the OK sensor for about 3 seconds. The machine is now temporarily unlocked and can be used to make drinks again. It locks itself as soon as the machine is switched off.
If the water is harder than 40°dH/7.0 mmol/l, limescale will build up more rapidy than with soft water. Descaling will need to be carried out more regularly than stated to prevent limescale damage to the machine. ^ Select "Settings F " from the Main menu, and then touch the OK sensor.
Setting the volume (keypad tone, buzzer) You can choose for a tone to sound each time a sensor is touched. The volume of the tone can also be adjusted: ^ Select "Settings F " from the Main menu, and then touch the OK sensor.
On You can switch the plate warmer on and off manually whenever you want, independently of the coffee machine. Off The plate warmer will not switch on because the coffee machine is not supplying it with any electricity. The coffee machine is delivered with "Off" as the default setting.
Resetting the factory default settings The "factory default" setting is used to reset the various settings back to the default status. From here you can select whether to reset all settings back to the default or to delete any user profiles .
User profiles You can delete all user profiles except for the standard one under "User Profiles". ^ Select "Reset" under "User profiles", and touch the OK sensor.
The flavour of the coffee produced depends on the type of coffee, how finely the beans are ground and the quantity of water used. Not all espresso and coffee cups are the same size. To ensure the machine uses the right amount of water to suit your taste and your cups, you can programme the amount to use.
Programming the proportions for cappuccino or latte macchiato via the OK sensor ^ Place the appropriate cup or glass for the amount you want to programme under the spouts.
Programming the amount for hot water via the Hot water sensor ^ Place the appropriate cup for the amount you want to programme under the hot water spout.
To cater for different tastes and preferences, you can enter up to 9 individual User profiles. For each User profile, you can select the following individual settings: – The amount of water for coff.
Creating a User profile ^ Use the arrow sensors to highlight "Create", and then touch the OK sensor. You can allocate up to 9 User profiles. If you try to allocate more than 9 User profiles, " Memory full " will appear in the display and you will need to delete one name to create space.
Deleting a User profile If you want to delete the User profile completely, ^ Select "Delete User profile" using the OK sensor. ^ Use the arrow sensors to select the User profile you want to delete. ^ Touch the OK sensor. A tick will appear after the user profile and after a short while it will be deleted.
Quick guide Clean the coffee machine every day to prevent a build-up of bacteria. Recommended frequency What do I have to do? Each time milk is used to make a drink, if more than one hour has passed s.
Always allow the machine to cool down before cleaning. Please be aware that the water in the drip tray will be hot. Danger of scalding. Do not clean the machine with a steam cleaner as this will damage the machine. Do not use cleaners containing chlorides, acids, soda or scouring agents.
Rinse the system Before switching the machine off for any length of time, the pipework, brew system and central spout need to be cleaned. If you have switched the automatic rinsing function off, you will need to rinse the system through manually. Place the smaller of the two containers under the central spout.
To rinse the milk pipework: Fill the larger of the two plastic containers to the "max" mark with cold water. Make sure that the lid of the stainless steel milk flask engages properly.
Clean milk pipework of any blockages If you are getting steam instead of milk from the central spout the milk pipework in the machine is probably blocked up. If the milk pipework in the lid is clogged, ^ use the cleaning brush to clean it under running water.
^ Take hold of the second holder by pin ( c ) and pull it upwards and off. The hoses can now be cleaned with a brush under running water. ^ Push the brush into both milk pipes from below. Move the brush in and out of the pipes as far as it will go until there are no milk residues left in them.
Stainless steel milk flask with lid The stainless steel milk flask with lid must be washed by hand using hot water. It is important to keep the top of the flask and the seals clean (whilst filling it and carrying it). Any soiling can lead to a malfunction of the flask in the machine.
The central spout ^ Pull the central spout down as far as it will go ( a ), and pull the cover to the spout forwards to remove it ( b ). ^ Turn the cover around, push the insert up and out and then clean both parts thoroughly. ^ Slide the insert back into the cover until it clicks into place.
Water container Empty the water container daily and - if you are not using the plumbed in water supply - fill with fresh, cold tap water just before use. When cleaning, make sure that there is no soiling in the area around the valve. Otherwise the container will not sit correctly and this could result in water leaking from the machine.
Drip tray There is a sensor in the drip tray which causes a message to appear in the display when the drip tray is full and needs to be emptied. Remove the tray and empty and clean it when this message appears. However, to avoid a build-up of odours, the drip tray should be cleaned every day .
Coffee bean container The coffee bean container must be cleaned by hand with hot water and a little washing-up liquid. ^ Take the coffee bean container out of the machine and then push the lid back to remove it. ^ Clean the coffee bean container and the lid, and then dry them both thoroughly.
Brew unit The brew unit must be cleaned once a week by hand and without using cleaning agent, because the moving parts are lubricated and the rubber seals could become brittle in a dishwasher. ^ Remove the water container, waste container and the coffee chute cover.
^ Press the light-coloured button under the handle of the brew unit a and whilst doing so turn the handle in the direction of the arrow b . Degreasing the brew unit Depending on the natural oil content of the coffee used, the brew unit could become blocked.
When prompted to Drop a cleaning tablet in the ground coffee chute , ^ remove the coffee chute cover and open the lid of the coffee chute. ^ Place a cleaning tablet into the coffee chute. ^ Close the lid, replace the coffee chute cover and close the machine front.
The machine should be descaled regularly to ensure that it functions correctly. It will remind you when this needs to be carried out. When only 50 portions can be made before the next descaling programme has to be run, the following message will appear in the display: No.
To run the descaling programme Maintenance qr HI J L n m C ^ Touch the right arrow sensor until “Maintenance“ is highlighted, and confirm with OK, or , ^ If the machine is switched off, touch the OK sensor whilst the machine is switched off. ^ Select "Descale" and touch the OK sensor.
When Programme finished appears in the display, ^ touch the OK sensor. The descaling programme is finished and the machine can be used for making drinks again. Plumbed in machines will automatically revert to using the plumbed in water supply if set up to do so before the descaling programme was run.
Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. Messages will appear in the display to warn of certain problems.
. . . the lighting suddenly switches itself off. If the machine has not been used for 15 minutes the lighting will switch itself off automatically. (See "Settings: customising your machine - Lighting: Setting the switch-off time").
...a message appears in the display reminding you to fill or replace the milk flask even though it is full and positioned correctly. ^ Clean the flask thoroughly, paying particular attention to the area around the lid and the neck (see "Cleaning and care - Stainless steel milk flask with lid").
. . . the machine door will not close. ^ Are the containers in position correctly? ^ It might be necessary to adjust the door hinges (see "Installation: Adjusting the door hinges"). . . . you have selected a drink with milk and "Heating phase" appears in the display.
. . . water or milk stops flowing whilst programming in the amount to dispense. The flow stops automatically when the maximum fill quantity is reached. The maximum quantity is stored in memory. If there was not enough water or milk in the water container or milk flask, the amount that has been dispensed will not be saved to memory.
...n o water comes out of the central spout. The filters in the brew unit are dirty. ^ Remove the brew unit and clean the filters with your finger (see "Cleaning and care - Brew unit"). . . . the brew unit or the waste container cannot be pulled out of the machine.
. . . the message "Check water inlet" appears in the display. There is a problem with the water inlet for the plumbed in water supply. ^ Check whether the inlet hose has become kinked or the stopcock is not fully open. ^ Remove the water container and empty it.
. . . the message "Fault - 73" appears in the display. The brew unit cannot be positioned correctly. ^ Take the brew unit out of the machine and clean it thoroughly (see "Cleaning and care - Brew unit"). ^ Push the coffee ejector on the brew unit into the correct position.
...i ti s difficult to open or close the door of the machine. ^ Align the door using the hinges (see "Installation - Adjusting the door hinges"). ^ Lubricate the cap on the central spout connector with the silicone grease supplied (see Cleaning and care - Central spout connector").
In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). Please note that telephone calls may be monitored and recorded for training purposes (UK only).
AItering the following settings from the factory default, will increase the energy consumption of the coffee machine: – Eco mode – Lighting – Time of day display – Timer – Connection of a plate warmer When altering these settings, the message "This setting increases energy consumption" appears in the display.
Notes on connecting to the mains water supply Connection to the mains water supply should only be carried out by a qualified and competent person in strict accordance with national and local safety regulations. This machine conforms to IEC 61770 and EN 61770.
Connection to the water inlet Before making plumbing connections, ensure the appliance is disconnected from the mains electricity supply. ^ Switch off at the main switch. Connection to the water supply should be carried out by a qualified plumber and should incorporate a stopcock with a 3/4" thread.
All electrical work should be carried out by a suitably qualified and competent person only, in strict accordance with current national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous.
Building-in and combination options The appliance is designed to be built into a tall unit. It can also be combined with other Miele built-in appliances. If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them (except when it is combined with a Miele built-in plate warming drawer).
Ventilation Ensure that the back of the coffee machine is sufficiently ventilated, so that steam and warm air can dissipate freely. The ventilation gaps in the furniture housing unit and the gap between the top of the housing unit and the ceiling must be at least 200 cm².
If it is not: ^ realign the machine by adjusting the four feet. The feet can be unscrewed by up to approx. 10 mm. ^ Plumb the appliance into the mains water supply. ^ Connect the appliance to the electricity supply. ^ Push it all the way into the niche until you feel resistance.
83.
Alteration rights reserved / 4112 CVA 5065 M.-Nr. 09 249 350 / 01.
デバイスMiele CVA5065の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Miele CVA5065をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMiele CVA5065の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Miele CVA5065の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Miele CVA5065で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Miele CVA5065を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMiele CVA5065の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Miele CVA5065に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMiele CVA5065デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。