AbocomメーカーUHL2000の使用説明書/サービス説明書
ページ先へ移動 of 20
USB 10M HomePNA Network Adapter Quick Installation Guide M73-APO08-370.
REGULATORY STATEMENTS Part15, Class B This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harm ful interface, and 2. This device must accept any in terface received, including interface that may cause undesired operation .
FCC Part 68 Registration This device complies with FCC Part 68 rules, and the use of this device is subject to the following restrictions: The FCC has established rules which permit this device to be directly connected to the te lephone network. Standardized jacks are used for these connections.
Introductions The USB 10M H omePNA Ne twork Adapt er is fully compatible with the Universal Serial Bus (USB) functionality b uilt in Windows 98/ME, Windows 2000 and Windows XP. It provides you the instant connectivity to multiple PCs over a home's exis ting telephone lines.
System Requirements A Pentium processor- based persona l computer 166MM X or above. At least 16 MB of R AM. One USB port well installed an d enabled. Microsoft Wind ows 98, Windows ME , Windows 2000, or Windows XP. Specifications Netw ork Standard HomePNA specificat ion 2.
Port Functions 1 USB-B USB device port. 2 Phone connects the USB 10M HomePNA Network Adap ter to a phone setting. 3 Line connects the USB 10M HomePNA Network Adapter to a phone jack. Table 1. Connection Ports LED Status 4 POWER glows green wh en your PC power is on and the device is well connected to the USB host port of your system.
Hardware Installation Before getting started Before installation, make sure the USB port on your computer is enabled. To learn how to check this, see the Diagnostics secti on. Getting Hooked Up 1. Locate the US B host port of your system . Align the USB connect or toward the USB host port, push evenly and stead ily until it is seated.
3. Windows will automatically detect the new hardware device. Per form the following procedures to install the device driver. Connecting Telephone Cabling 1. Attach one end of the telephone l ine to the USB 10M HomePNA Network Adapter’s Line port. 2.
Software Installation Windows 98 Installation 1. Once the USB 10M Home PNA Network Adapter is well connected, Windows will detect the new device a nd prom pt you to insert the network device driver. Click Next. 2. Insert the USB 10M HomePNA Network Adapter Driver Disk into the flop py disk drive.
3. Specify Floppy disk drivers and click Next. Windows will start searching for the appropriate driver for the network devi ce installation. 4. Ensure that the file path is correct. Click Next to continue. 5. Windows will copy the appropriate dr iver to your system.
6. Clic k Finish to complete the software installation. Window Me Installation 1. Once the USB Home PhoneLine 1Mbps Network Adap ter is well connected to your computer, Windo ws ME will automatically detect the new device. Select Specify the Location of the driver… and click Next .
Removable M edia (Floppy , CD-ROM…) and click Next . 3. Clic k Next t o continue. 4. Windows will copy the appro priate driver to your system. If Windows ME asks you to supply your original Wi ndows ME installation CD-ROM, load it on the CD- ROM drive.
Windows 2000 Installation 1. Once the USB 10M Home PNA Network Adapter is well connected, Windows will detect the new device a nd prom pt you to insert the network device driver. Click Next. 2. Insert the USB 10M HomePNA Network Adapter Driver Disk into the flop py disk drive of your sy stem.
3. Specify Floppy disk drivers and click Next. Windows will start searching for the appropriate driver for the network devi ce installation. 4. Ensure that the file path is correct.
5. Clic k Yes t o continue. 6. Windows will copy the appropriate dr iver to your system. If Windows 2000 ask s you to supply your origin al Windows 2000 installation CD-ROM, load it on the CD- ROM drive. 7. Clic k Finish to complete the software installation.
Windows XP Installation 1. Once the USB 10M HomeP NA Network Adapter is well connected, Windows will detect the new devi ce and prom pt you to insert the network devi ce driver.
drive of y our system . Select Searc h for the removable media… and click Next. 3. Windows will star t searching for the appropriate driver for the installation . When the screen appears as below, click Continue Anyway to proceed. 4. Wait for sec onds while Windows c opies the appropriate driver to your sy stem.
5. Clic k Finish. The software installation for this network device is now com pleted. - 15 -.
Diagnostics How should I know if the devices (i.e. Universal Serial Bus controller, USB 10M HomePNA Network Ada pter) exist and are enabled in my computer? Step1 Windows 98/ME Go to Start Settings Control Panel System Device Manager. Windows 2000 Go to Start Settings Control Panel System Hardware Device Manager .
- 17 - - 17 -.
デバイスAbocom UHL2000の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Abocom UHL2000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAbocom UHL2000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Abocom UHL2000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Abocom UHL2000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Abocom UHL2000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAbocom UHL2000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Abocom UHL2000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAbocom UHL2000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。