MitsubishiメーカーCP3020DAEの使用説明書/サービス説明書
ページ先へ移動 of 24
DIGITAL COLOUR PRINTER MODEL CP3020DAE OPERATION MANUAL THIS OPERATION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL COLOUR PRINTER. This digital colour printer complies with the requirements of the EC Directive 89/336/EEC, 73/23/EEC and 93/68/EEC.
CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS W ARNING: Use the AC power cord according to the recommendations as below, in order to comply with EN60950-1. Connect to the 230V receptacle of the room or the host equipment. The AC power cord should be VDE approved and consist of core size 1mm 2 or bigger, length 2.
1 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS CONTENTS Contents ................................................................................................ 1 Safety precautions ........................................
2 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS SAFETY PRECAUTIONS In the interest of safety , please observe the following precautions: POWER REQUIREMENT This product is designed for operation on 220-240V AC 50/60Hz. Never connect to any outlet or power supply having a different voltage or frequency .
3 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS INST ALLA TION LOCA TIONS MAINT AIN GOOD VENTILA TION V entilation slots and holes are provided on the rear of this unit. Place the unit on a hard and level surface and locate at least 17 cm (6.
4 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS OTHER CAUTIONS Dust or other foreign matter adhering to the print paper or the ink cassette, or deformation resulting from exposure to extremely low or high temperatures could cause loss of colour , uneven colour or lines, or wrinkles in the print images.
5 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS SPECIAL FEA TURES 2 PRINT SIZES ARE A V AILABLE DEPENDING ON INK SHEET 2 printing sizes are available depending on the 3-colour YMC ink sheet being used. There are 2 types of ink sheet, matte and glossto achieve the print finish required.
6 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS UNP ACKING T ake the unit out of the box by the following procedures and illustrations. Make sure the contents of the accessory are all included. 1 1 1 1 1 Open the top of the box and remove the cardboard.
7 CONNECTIONS FEA TURES PREP ARA TION OTHERS TROUBLE- SHOOTING PRECAUTIONS FEA TURES & FUNCTIONS FRONT P ANEL 6 5 4 3 2 1 7 8 9 1 1 1 1 1 POWER BUTT ON Press to turn on power . Press again to turn off power . When the power is turned on, POWER indicator illuminates.
8 CONNECTIONS FEA TURES PREP ARA TION OTHERS TROUBLE- SHOOTING PRECAUTIONS REAR P ANEL 1 1 1 1 1 USB PORT Use this terminal to connect the unit to a device equipped with USB interface such as a personal computer . See page 9 for connection. 2 2 2 2 2 AC LINE SOCKET Connects the AC power cord provided with the printer .
9 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS CONNECTIONS CONNECTION WITH USB INTERF ACE 2 2 2 2 2 CONNECTING WITH A PERSONAL COMPUTER 1 1 1 1 1 Make sure to turn off the personal computer . 2 2 2 2 2 Connect this unit with the personal computer as following example.
10 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS BEFORE OPERA TION Before printing, 1. Remove the shipping inserts on both sides of the paper tray inserting slot and the spacer inside the paper tray . (See below) 2. Install the ink cassette with an ink sheet loaded correctly .
11 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS Spool Ink sheet Handle Ink cassette Hubs Holder INK SHEET INST ALLA TION BEFORE OPERA TION Thermal head Thermal head Thermal.
12 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS BEFORE OPERA TION Plate lever PRINT P APER INST ALLA TION The paper tray adjusts to the size of the paper you are installing. Do not force paper that is too long or too wide into the tray .
13 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS 5 5 5 5 5 Remove the protection sheet placed on top of the paper . NOTE •Y ou can load only one pack of print paper supplied as paper sheet set. When adding the paper , make sure that it does not to exceed the red line on the paper tray .
14 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS BEFORE OPERA TION USAGE AND ST ORAGE OF P APER SHEET SET 2 BEFORE PRINTING • Fingerprints or dust on the paper’s surface may degrade print quality and cause paper jams.
15 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS PRINTER DRIVER INST ALLA TION The printer driver is required to print the data from a personal computer connected with this unit. The printer driver for Windows ® is supplied with this unit.
16 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS TROUBLESHOOTING If for some reason printing is not possible or error occurs during printing, the indicators on the front panel will be lit. In this case, follow the procedure described below .
17 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS BEFORE CALLING FOR SERVICE 2 Use the following troubleshooting chart to try to resolve any apparent defect in operation. If you are unable to resolve the problem, unplug the power cord and contact your dealer .
18 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS OVERCOMING P APER JAMS TROUBLESHOOTING Thermal head 2 2 2 2 2 CLEARING A P APER JAM FROM THE INK CASSETTE AREA 1 1 1 1 1 Press POWER button to turn off the printer . 2 2 2 2 2 Press OPEN button to open the top cover .
19 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS 1 1 1 1 1 Position the ink cassette with the torn ink sheet on a flat, clean surface .
20 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS THERMAL HEAD CLEANING Cleaning part A small amount of alcohol How to hold tissue paper Cleaner pen (Option) CLEANING Guide bar Thermal head Cov er Cleaning as indicated below will help maintain stable printer operation and extend the printer ’s life.
21 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS SPEC & OPTIONS SPECIFICA TIONS Class Digital colour printer Model CP3020DAE Printing method Thermal Dye Sublimation 3 colour faces progressive printing (yellow , magenta and cyan) and surface lamination Print quality Dot resolution Max.
EE919C131A9 Manufactured by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-city , Kyoto Japan Mitsubishi Electric Europe B.V . UK Branch T ravellers Lane, Hatfield, Herts.
デバイスMitsubishi CP3020DAEの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Mitsubishi CP3020DAEをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMitsubishi CP3020DAEの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Mitsubishi CP3020DAEの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Mitsubishi CP3020DAEで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Mitsubishi CP3020DAEを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMitsubishi CP3020DAEの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Mitsubishi CP3020DAEに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMitsubishi CP3020DAEデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。