AbocomメーカーWU5205の使用説明書/サービス説明書
ページ先へ移動 of 85
802.11 b/g/n Micro Mini Wireless LAN USB2.0 Adapter User’s Manual.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable p rotecti on against harm ful interference in a residential installation.
Country Code Statement For product available in the USA/Cana da market, only channel 1~ 11 can be operated. Selection of other channels is no t possible. To maintain compliance with FCC RF exposure requir ements, use only belt-clips, holsters or similar ac cessories that do not con tain metallic components in its assembly.
Table of Contents INTRODUCTION ................................................................................................... 1 F EATURES ............................................................................................................
WPS ......................................................................................................... 30 Radio On /Off ........................................................................................... 33 About .......................
S OFT AP MODE ..................................................................................................... 68 Config ...................................................................................................... 68 Access Cont rol....
- 1 - INTRODUCTION The WU5205 is an IEEE802.11b /g/n USB adapter th at connects your notebook to a wireless local area. T he WU5205 fully complies with IEEE 802.11n draft 3.0 and IEEE 802.11 b/ g standards, delivers reliable, cost-effective, feature rich wireless connectiv ity at high throughput from an extended distance.
- 2 - Windows 2000/XP Installation Install the Software Caution ! Do not insert the wireless card i nto your comput er until the In stallShield Wizard finish installing. 1. Exit all Windows programs. Insert the included CD-ROM into your computer. The CD-ROM will run automatically.
- 3 - 3. Select the check box to choose a Configuration Tool from the listed two choices. z Configuration Tool : Choose to use our configuration utility. z Microsoft Zero Configuration Tool : Choose to use Windows XP’s built-in Zero Configuration Utility (ZCU).
- 4 - 6. When the following sc reen appears, click Finish to com plete the software installation..
- 5 - Install the Hardware Note : Insert the Wireless USB card when you finished your software installation. Insert the USB Adapte r into the USB Port of your computer.
- 6 - Windows Vista Installation Install the Software Do not insert the wireless LAN adap ter into your comput er until the procedures in “ Driver& Utility I nstallation” have been p erformed. 1. Insert the included CD-ROM into the CD-ROM drive of your computer.
- 7 - 4. When y ou are prom pted the f o llowing message, please click Install to begin the installation . 5. When the fo llowing screen app ears, c lick Finish to complete the software installation.
- 8 - Install the Hardware Note : Insert the Wireless USB card when you finished your software installation. Insert the USB Adapter into the USB Port of your computer.
- 9 - NETWORK CONNECTION IP Address Note : When assigning IP Addresses to the computers on the net work, remember to have the IP address for each computer set on the same subnet mask. If your Broadband Router use DHCP technology, however, i t won’t be necessary for you to assign Static IP Address for yo ur computer.
- 10 - UTILITY CONFIGURATION FOR WINDOWS 2000/XP After the Wireles s adapter has be en successfully i nstalled, users can use the included Configuration Utili ty to set their preference. Go to Start J (All) Program J Intelligent Wireless J Intellige nt Wireless Utility .
- 11 - Station Mode Notice: Under screen resolution 800 x 600 pix els, click the tr iangle button at the right down corner of the utility to expand the information of the station, the information will not be displayed completely. Profile Profile can book keep ing your favorite wireless setting among yo ur home, office, and other public hot-spot.
- 12 - Network Ty pe Shows the network type of the device, including Infrastructure and Ad-Hoc. Authentication Shows the authentication m ode. Encryption Shows the encryption type. Use 802.1x Whether or not use 802.1x featur e. Tx Power Transmit power, the amount of power used by a r adio transceiver to send the signal out.
- 13 - SSID : The SSID is the unique name shared among all points in your wireless netw ork. The name must be identical for all devices and poin ts attempting to connect to the same network.
- 14 - Preamble type into Auto or Long . RTS Threshold : User can adjust the RTS threshold number by sliding the bar or key in the value d irectly. The default value is 2347. RTS/CT S Threshold is a mechanism implemented to prevent the “ Hidden Node ” problem.
- 15 - need to be set to the same auth entication type. • Shared : Shared key is when b oth the sender and the recipient share a secret key. • LEAP: Light Extensible Auth entication Protocol. It is an EAP authentication type use d primarily in Cisco Aironet WLANs.
- 16 - 802.1x Setting : When user use radius server to authenticate client c ertificate for WP A authentication mode (WPA authentication do not support EAP Method- MD5-Challenge). 802.1x tab: EAP Method : • PEAP : Protect Extensible Authentic ation Protocol.
- 17 - authentication and can be used to d ynamically generate user-based and session-based WEP keys to secure subsequent com munications between the WLAN client and the access point.
- 18 - • Tunnel Passwor d : Password for tunnel. Session Resumption : Reconnect the signal while broken up, to reduce t he packet and im prove the transmitting speed. User can cli ck the box to enable or disable this function. IDPASSWORD tab: ID/ PASSWORD : Identity and password for server.
- 19 - authentication. OK : Click to sa ve settings and exit th is page. Cancel: Click to call of f the settings and ex it. Server Certification tab : Use certificate ch ain : Choose use server that issuer of certificates.
- 20 - Network The Network page displays the informa tion of surrounding APs from last scan result. The tab lists the information including SSID, Network type, Channel, Wireless mode, Security-Enabled and Signal. Network Tab Sorted by Indicate that AP list are so rted by SSID, Channe l or Signal.
- 21 - Connect Select an item on the list and then cl ick to make a connection. AP Informati on When you double click on the intended AP, you can see AP's detail information that divides into four parts . Th ey are General, WPS, CCX and 802.11n information.
- 22 - Authentication Type : There are four t ypes of authentication modes supported by RaConfig. They are Open, Shared, W PA-PSK and WPA s ystem. Encryption Ty pe : For Open and Shared authentic ation mode, the selection of encryption type are None and WEP.
- 23 - CCX information contains CCKM, Cmic and Ckip information. Close : Click this button to exit the information sc reen. 802.11n This tab will show up if you select the AP that support 11n mode. Here shows the c onnected AP 802.11n related information.
- 24 - Link Status Tab Status Shows the current connect ed AP SSID and MAC address. If there is no conn ection existing, it will show Disconnected. Extra Info Shows the link status and Tx power per centage.
- 25 - Network Ty pe Network type in use, Infrastructure for BSS, Ad-Hoc for IBSS network. IP Address Shows the IP address information. Sub Mask Shows the Subnet Mask information. Default Gateway Shows the default gateway information. Link Quality Shows the connection quality based on signal strength and TX/RX packet error rate.
- 26 - Advanced Tab Wireless mode Here supports 2.4G (include d 80 2.11b/g/n) wireless mode. Enable TX Burst Check to enable this function. This function en ables the adapter to deliver better throughput during a period of time, it only takes effect when connecting with the AP that supports this function.
- 27 - Apply Click to apply above settings. Statistics The Statistics screen disp lays the s ta tistics on your curren t network settings. Transmit Frames Transmitted S uccessfully Shows information of frames successfully sent. Frames Retransmitted Successfu lly Shows information of frames successfully sent with one or more reties.
- 28 - Receive Statistics Frames Received S uccessfully Shows information of frames Received Successfully. Frames Received With CRC Error Shows information of frames received with CRC error. Frames Dropped Due To Out-of-Resource Shows information of fr ames dropped due to resource issue.
- 29 - WMM Enable Check the box to enab le Wi-Fi Multi-Media function that is meant to improve audio, video and voice applications transm itted over Wi-Fi.
- 30 - Apply Click this button to apply the settings. Tear Down Select a direct li nk STA, then click "Tear Down" button to disconnect the STA. WPS The primary goal of Wi-Fi Protected Setup (Wi-Fi Sim ple Configuration) is to simplify the se curity setup and mana geme nt of Wi-Fi networks.
- 31 - network. List information included Authentication T ype, Encryption Type, Config Method s, Device Password ID, Selected Registr ar, State, Versio n, AP Setup Lock ed, UUID-E and RF Bands. PIN Code 8-digit numbers. It is required to enter PIN Code into Registrar when using PI N method.
- 32 - BSSID : The MAC address of th e connected AP. F ixed and cannot be changed. Authentication Type : The authentication type support Open, WPA-PSK and WPA2-PSK. Encryption Ty pe: For Open authentication mode, the selection of encr yption type are NONE and WEP .
- 33 - Delete Delete an existing credential . And then select the next credential if ex ist. If there is an empty credentia l, the driver will select any non-security AP. PIN Start to add to R egistrar using PIN (Personal Identification Number) configuration method.
- 34 - About This page displays the info rmation of th e wireless card including, Config Version/ Date, Driver Version/ Date, EEPROM Version, Firmware Version and Phy_Address.
- 35 - Utility Menu List To access the utilit y menu list, please r ight click the ut ility icon on the task bar. z Launch Config Utility : Select to ope n the utility screen. z Use Zero Configuration as Configuration Utility : Select t o use the Window XP built-in utility (Zero configuration utility).
- 36 - Soft AP mode Config Config SSID AP name of user type. Us er also can cli ck Use Mac Address button to display it. Channel Manually force the AP us ing the channel. The system default is CH 1. Wireless mode Here supports 2.4G (inclu d ed 802.11b/g/n) wireless mode.
- 37 - Authentication Type : There are several types of authentication modes inc luding Open, Shared, WPA-PSK, WPA2-PSK, a nd WPA-PS K/ WPA2-PSK. Encryption Ty pe : For Open and Shared authentication mode, the selections of en cryption type a re Not Use and WEP .
- 38 - WEP Key : Only valid when using WEP encryption algorithm. The ke y must match with th e AP’s key. There are two fo rmats to enter the keys. • Hexadecimal (128bits): 26 Hex characters . • ASCII (128bits): 13 ASCII characters. Sh o w Pas swo rd : Check this box to show the password you entered.
- 39 - Access Control Access Control Access Policy User chooses whether AP start the function or not. System default is Disable. z Disable: Do not use this access control fun ction. z Allow All: Only the MAC addre ss listed in the Access List can connect with this soft AP.
- 40 - Add Add the MAC address that you would like to set. Delete Delete the Mac address that you have set. Remove All Remove all Mac address in the A ccess List. Apply Apply the above changes. MAC Table MAC Table MAC Address The station MAC address of current connection .
- 41 - Event Log Event Log Event Time (yy/mm/dd-hh:mm:ss) Records the event tim e. Message Records all the event messages..
- 42 - Statistics Transmit Statistics Frames Transmitted Successfu lly Frames succes sfully sent. Frames Fail To Receive ACK After All Retries Frames failed transm it after hitting retr y limit.
- 43 - Receive Statistics Frames Received S uccessfully Frames Receive d Successfully Frames Received With CRC Error Frames received with CRC error. Frames Dropped Due To Out-of-Resource Frames dropped due to resource issue Duplicate Frames Rece ived Duplicate received fram es.
- 44 - UTILITY CONFIGURATION FOR WINDOWS VISTA After the Wireles s adapter has be en successfully i nstalled, users can use the included Configuration Utili ty to set their preference. Go to Start J (All) Program J Intelligent Wireless J Intellige nt Wireless Utility .
- 45 - Station Mode Profile Profile can book keep ing your favorite wireless setting among yo ur home, office, and other public hot-spot. You m ay save multip le profiles, and activate the corr ect one at your preference. The Profile manager en ables you to Add, Edit, Delete and Activate profiles.
- 46 - Authentication Shows the authentication m ode. Encryption Shows the encryption type. Use 802.1x Whether use 802.1x feature or not. Tx Power Transmit power, the amount of power used by a r adio transceiver to send the signal out. Channel Shows the selected ch annel that i s currently in us e.
- 47 - Profile Name : User can enter profile nam e, or use default name defined by system. The default is PROF# (# 1, #2, #3....). SSID : The SSID is the unique name shared among all points in your wireless netw ork. The name must be identical for all devices and poin ts attempting to connect to the same network.
- 48 - Tx Power : Transmit power, the amount of power used by a radio transceiver to send the signal ou t. Select the Tx power percentage from th e pull-down list includ ing Auto, 100%, 75%, 50%, 25% , 10% and Lowest . Preamble : This function will show up when Ad-hoc network type be selected.
- 49 - Authentication Type: There are six type of authentication modes including Open, Shared, WPA, WPA-PSK, WPA2 and WPA2-PSK. • Open : If your access point/ wireless router is usin g " Open” authentication, then the wireless adapt er will need to be set to the same auth entication type.
- 50 - WPA Pre-shared Key : This blank is the shared s ecret between AP and STA. For WPA-PSK and WPA2-PSK authentication mode, this field must be f illed with character longer than 8 and less than 64 lengths. WEP Key : Only valid when using WEP encryption algorithm.
- 51 - • PEAP : Protect Extensible Authentic ation Protocol. PEAP transport securely authentication data by using tunnelling between PEAP clients and an authentication server. PEAP can auth enticate wireless LAN clients using only server-side certif icates , thus simplifying the implementation and administration of a secure wireless LAN.
- 52 - ID/ PASSWORD : Identity and password for server. • Authentication ID / Password : Identity, password and domain name for server. Only "EAP-FAST" and "LEAP" authentication c an key in domain nam e. Domain name can be keyed in blank space.
- 53 - Certification function. OK : Click to sa ve settings and exit th is page. Cancel: Click to call of f the settings and ex it. Server Certification tab : Use certificate ch ain : Choose use server that issuer of certificates. Server name : E nter an authentication sever name.
- 54 - Network Tab Sorted by Indicate that AP list are so rted by SSID, Channe l or Signal. Show dBm Check the box to show the dBm of the AP list. SSID Shows the name of BSS network. Network Ty pe Network type in use, Infrastructure for BSS, Ad-Hoc for IBSS network.
- 55 - General General information contain AP's SSID, MAC address, Authentication Type, Encryp tion T ype, Chann el, Network Type, Beacon Interval, Signal Strength and Suppo rted Rates.
- 56 - Device Password ID : Indicate the method or identifies the specific password that the selec ted Registrar intends to use . Selected Regist rar : Indicate if the user has recently activated a Reg istrar to add an Enrollee. The values are "TRUE" and "FALSE".
- 57 - This tab will show up if you select the AP that support 11n mode. Here shows the c onnected AP 802.11n related information. Link Status Click the triangle button at the right dow n corn er of the windows to expand the link status. The link status page displa ys the detail inform ation of current connection.
- 58 - Link Status Tab Status Shows the current connect ed AP SSID and MAC address. If there is no conn ection existing, it will show Disconnected. Extra Info Shows the link status and Tx power per centage.
- 59 - Transmit Shows the current Link Speed an d Throughput of the transmit rate. Receive Shows the current Link Speed an d Throughput of receive rate. Link Speed Shows the curr ent transmitting rate and receiving rate. Throughput Shows the transmitting and re ceiving speed of da ta.
- 60 - time, it only takes effect when connecting with the AP that supports this function. Enable TCP Window Size Check to increase the trans mission quality. The large TCP window size the better performance. Fast Roaming at Check to set the roaming interv al, fast to roam ing, setup by transmits power.
- 61 - transmit after hit ting retry limit. RTS Frames Successfu lly Receive CTS Shows information of successfully receive CTS after sending RTS frame RTS Frames Fail To Receive CTS Shows information of failed to re ceive CTS after sending RTS. Reset Counter Click this button to reset counters to zero.
- 62 - WMM / QoS The WMM page shows the Wi-Fi Multi-Med ia power save function and Dir ect Link Setup that ensure your wireless network q uality. WMM/QoS Tab WMM Enable Check the box to enable Wi-Fi Multi-Media function that is meant to improve audio, video and voice applications transm itted over Wi-Fi.
- 63 - • DLS enabled. Timeout Value Timeout Value represents that it disconnect automatically after few seconds. The v alue is integer that must be between 0~65535. It represents that it always connects if the valu e is zero. Default value of Timeout Value is 60 seconds.
- 64 - BSSID, Channel, ID (Device Password ID), Security-Enabled. Rescan Issue a rescan command to wireless NIC to update information on surrounding wireless network.
- 65 - If you select the AP that listed in the W PS Profile List field, you can click the Detail bu tton to see more AP information. SSID : Shows the connected AP network name. BSSID : The MAC address of th e connected AP. F ixed and cannot be changed.
- 66 - then select the la st profile at the Profile Pag e. If there is an empty profil e page, the driver will select an y non-security AP. Export Profile Export all credentials to Profile. Delete Delete an existing credential. And then select the next credential if exist.
- 67 - About This page displays the information of the wireless card including, RaConfig Version/ Date, Driver Version/ Date , EEPROM Version and Phy_Address. Utility Menu List To access Windows Vista utilit y menu list, please righ t click the utilit y icon on the task bar.
- 68 - Soft AP mode Config Config SSID AP name of user type. Us er also can cli ck Use Mac Address button to display it. Channel Manually force t he AP using th e channel. The s ystem default is CH 1. Wireless mode Here supports 2.4G (inclu d ed 802.11b/g/n) wireless mode.
- 69 - Authentication Type : There are several types of authentication modes inc luding Open, Shared, WPA-PSK, WPA2-PSK, a nd WPA-PSK/WPA2-PSK. Encryption Ty pe : For Open and Shared authentication mode, the selections of en cryption type a re Not Use and WEP .
- 70 - WEP Key : Only valid when using WEP encryption algorithm. The ke y must match with th e AP’s key. There are severa l formats to ente r the keys. • Hexadecimal (64bits): 10 Hex characters. • Hexadecimal (128bits): 26 Hex characters . • ASCII (64bits): 5 ASCII characters.
- 71 - Access Control Access Control Access Policy User chooses whether AP start the function or not. System default is Disable. z Disable: Do not use this access control fun ction. z Allow All: Only the MAC addre ss listed in the Access List can connect with this soft AP.
- 72 - Add Add the MAC address that you would like to set. Delete Delete the MAC addre ss that you have set. Remove All Remove all MAC addre ss in the Access List. Apply Apply the above changes. MAC Table MAC Table MAC Address The station MAC address of current connection .
- 73 - Event Log Event Log Event Time (yy/mm/dd-hh:mm:ss) Records the event tim e. Message Records all the event messages..
- 74 - Statistics Transmit Statistics Frames Transmitted Successfu lly Frames succes sfully sent. Frames Fail To Receive ACK After All Retries Frames failed transm it after hitting retr y limit.
- 75 - Receive Statistics Frames Received S uccessfully Frames Receive d Successfully Frames Received With CRC Error Frames received with CRC error. Frames Dropped Due To Out-of-Resource Frames dropped due to resource issue Duplicate Frames Rece ived Duplicate received fram es.
- 76 - UNINSTALLATION FOR WINDOWS 2000/XP In case you need to uninstall the Utility and driver, please refer to below steps. (As you uninstall the utilit y, the driver will be un installed as well.) 1. Go to Start Æ All Programs Æ Intelligent Wireless Æ Uninstall –Intelligent.
- 77 - 2. Click Yes to complete remove the selected application and all of its features. 3. Then click Finish to complete the uninstallation ..
- 78 - UNINSTALLATION FOR WINDOWS VISTA In case you need to uninstall th e utility and driv er, please ref er to below steps. (As you uninstall the util ity, the dr iver will be uninsta lled as well.) 1. Go to Start Æ Progr ams Æ Intelligent Wireless Æ Uninstall –Intelligent.
- 79 - 2. Click Yes to complete remove the selected application and all of its features. 3. Then click Finish to complete the uninstallation ..
デバイスAbocom WU5205の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Abocom WU5205をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAbocom WU5205の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Abocom WU5205の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Abocom WU5205で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Abocom WU5205を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAbocom WU5205の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Abocom WU5205に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAbocom WU5205デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。