Moxa TechnologiesメーカーMOXA AirWorksの使用説明書/サービス説明書
ページ先へ移動 of 52
MOXA AirW orks A WK-1 100 User ’ s Manual www .moxa.com/product First Edition, July 2005 Moxa Networki ng Co., Ltd. Tel: +886-2-2910-1230 Fax: +886-2-2910-1231 Web: www.moxa.com MOXA Technical Support World wide: support@moxanet.tw The Americas support@ moxa.
MOXA AirWorks AWK-1100 User’s Manual The software d escribed in this m anual is furni shed under a license agreem ent and may be used only in accordance with the term s of that agreement. Copyright Notice Copyright © 2005 Moxa Netw orking Co., Ltd.
Table of Contents Chapter 1 Introduction ............................................................................................... 1-1 Overview .....................................................................................................
Appendix C Regulatory Statement .............................................................................. C-1 Appendix D Service Information .................................................................................. D-1 MOXA Internet Services .
1 1 Chapter 1 Introduction MOXA AirWork s AWK-1100 enables w ireless us ers to access network resources wireles sly. AWK-1100 can au thenticate and authorize wir eless users by IEEE 802.
MOXA AirWorks AWK-1100 User’s Manual Introduction 1-2 Overview AWK-1100 is rated to ope rate at temperatur es ranging from 0 to 60°C, a nd is rugged e nough for any harsh industrial environ ment. It can be installed easily on DIN-Rail moun ting as well as in distribution boxes.
MOXA AirWorks AWK-1100 User’s Manual Introduction 1-3 802.11g: 10% PER@6Mbps ≤ -88dBm, 10% PER@9Mbps ≤ -87dBm 10% PER@12Mbps ≤ -8 4dBm, 10% PER@18Mbps ≤ -8 2dBm 10% PER@24Mbps ≤ -7 9dBm, 1.
.
2 2 Chapter 2 Getting Started This chapter exp lains how to install MOXA AirWorks AWK-11 00 for the first time. The following t opics are covered: First-Time Installation and Configuration Deploying the Access Point (AP) Setting up Client Computers ¾ Configuring IEEE 802.
MOXA AirWorks AWK-1100 User’s Manual Getting Started 2-2 First-Time Installation and Configuration Before installing AWK-1100, check to make sure that all items in the Package Checklist are in the box. In addition, you will need access to a notebook computer or PC equippe d with an Ethernet port.
MOXA AirWorks AWK-1100 User’s Manual Getting Started 2-3 NOTE For security reason s, we strongly recommend ed changing the password . To do so, open the Network Ma nager home page, click on Gener al Æ Password , and then follow the onscreen instructions.
MOXA AirWorks AWK-1100 User’s Manual Getting Started 2-4 Step 6: Configure AWK-1100 ’s IEEE 802.11 settings Go to the IEEE 802.11 Commun ication section to configure I EEE 802.11g-related communication settings, incl uding Regulat ory domain, C hannel number, and Network nam e (SSID).
MOXA AirWorks AWK-1100 User’s Manual Getting Started 2-5 NOTE About 10 seconds are needed for the AP to c omplete its restart process. Deploying the Access Point (AP) After the sett ings have been c onfigured, depl oy the AP to t he field applicat ion environm ent.
MOXA AirWorks AWK-1100 User’s Manual Getting Started 2-6 To establish a wireless link to an Access Point: 1. Launch the configuration/monitoring u tility provided by the vendor of the in stalled WLAN NIC. 2. Use the utility to make appropriate Operati ng Mode , SSID , and WEP settings.
MOXA AirWorks AWK-1100 User’s Manual Getting Started 2-7 Checking if the TCP/IP-related Settings Work To check if a client computer can assess th e Internet: 1. Open a Windows Command Prompt window on the client computer. 2. Type “ ping AP ”, where AP is the IP address of the Access Point.
.
3 3 Chapter 3 Web Console Configuration In this chapter, we will explain each Web management page of the Web-based Network Manag er. The following topics are covered in this chapter: Overview ¾ M.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-2 Overview Menu Structure The left side of the home page co ntains a menu that y ou can use to carry out commands. Here is a brief descri ption of the hy perlinks in t he menu: y Home.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-3 y Advanced. Advanced settings of the AWK-1100. ¾ Packet Filters. Ethernet Type Fiters, IP Protocol Filters, and TCP/UDP Port Filters settings. ¾ Management. UP nP, System Log, an d SNMP settings .
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-4 Viewing Status Associated Wireless Clients On this pa ge, the status infor mation of each a ssociated client, incl uding its MAC address, IP address, user name (if the clie nt has been IEEE 802.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-5 Link Monitor (AP Client mode only) When the AWK-1100 is in AP Client mode, you can use the Link Mo nitor status page to monitor the link quality and signal strengt h sensed by its RF m odule.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-6 AP/Bridge AP Client AP/Bridge WDS STA-AP AP Client STA-AP To establish a static bridge link based on WDS, the AP/ bridges at bot h end of the WDS link must be configure d manually with each other’s MAC ad dresses.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-7 To upgrade the fir mware of AWK-1 100 by HTTP: 1. Click Browse and then select a correct firmware .bin file. The firmware file path will be shown in the Firmware file name text box. 2.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-8 3. Configure the IP address of the computer so that the AWK-1100 and the computer are on the same IP subnet. 4. On the computer, run the TFTP Server utility, and specify the folder in which the firmware files will be placed.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-9 TIP If you wa nt to upgrade the firmware of a deployed AP from a remot e location over t he Internet, adjust the Timeout and Max no. of ret ries settings of th e TFTP Server for remote TFTP upgrade to succeed.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-10 NOTE Make sure the file is a valid co nf iguration backup file fo r AWK-1100. TIP If you want to back up or restore the con figur ation from a remote location over th e Internet, adjust the Timeout and Max no.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-11 DHCP Server (AP/Bridge modes only) Basic AWK-1100 ca n assign IP addresses t o client comput ers automatically by DHCP.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-12 To assign a static IP addre ss t o a specific DHCP client: 1. Specify the MAC address of the DHCP client an d the IP address to be assigned t o it. Then, give a descri ption for t his mapping.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-13 Association Control If the num ber of currently asso ciated wirele ss clients exceeds the value specified in the Ma x number of clients setting, no more wireless clients can a ssociate with the AWK-1100.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-14 By WDS, two or more LAN segments can be connected wirelessly. As illustrated in the above figure, a pair of wireless LAN-to-LAN bridges is use d to connect two LAN segments. Since the AP is WDS-enabled, it can be used as a wireless bridge.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-15 WARNING Be sure to eliminate loops from networks that consist of wireless br idges, Ethernet switches, Ethernet links, and WDS links. If any loops ex is t, packets will circle around the loops and network performance will b e seriously degraded.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-16 AP 1 AP 2 STA 1 STA 2 STA 3 W ireles s Link Ethernet Link Switch WCI : This AP Only WCI : This AP Only Behavior of the “This AP .
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-17 A total of 7 security modes are availa ble with the different AWK -1100 models: y Open System. No authentication, no data encryption . y Static WEP. WEP ( Wired Equivalent Privacy) keys m ust be manually co nfigured.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-18 MAC-Address-Based Access Control Wit h MAC-Address-Based Access Control , you can s pecify the wireless client computers that are permitted or not permitted to associate with the AWK-1100.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-19 Sample MAC ACL file To down load a MA C ACL f ile fro m a TFTP server: 1. Specify the IP address of the TFTP server in the TFTP server IP address text box. 2. Specify the name of the M AC ACL f ile on the TFTP server in th e MAC ACL file name text box.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-20 RA DIUS Server Internet Wireless A P Wireless A P User Dat abase user authentication user authentication IEEE 802 .1X-Comp liant Wirele ss Client IEEE 802.1X and RADIUS An access point supporting IEEE 802.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-21 Configuring Advanced Settings Packet Filters The AWK-1100 provides layer 2 (Ethernet Typ e Filte rs), layer 3 (IP Protocol Filters), and layer 4 (TCP/UDP Port Filters) filtering capabilities.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-22 TCP/UDP Port Filters The destination port field of t he TCP or UDP hea der of a packet inc oming from t he WLAN or Ethernet interface is insp ected for filtering.
MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration 3-23 NOTE The SNMP Authenticati on Failure trap is issued when using an incorrect community string to manage the AP via SNMP and the S NMP MIB II OID, snmpEnableAuthenTraps , is enabled ( disable d by default).
.
A A Appendix A Default Settings TIP Press the Rese t ( SF-Reset , or Soft-Reset ) switch on the hous ing of a powered-on AP to reset th e configuration settings to factory-default v alues. Setting Name Default V alue Global User Name admin Password root IEEE 802.
MOXA AirWorks AWK-1100 User’s Manual Default Settings A-2 LAN Interface Method of obtainin g an IP Address Set manually IP Address 192.168.127.253 Subnet Mask 25 5.
B B Appendix B Troubleshooting Check the following first: y Make sure that the AWK-1100’s power is on and the Ethernet cables are conn ected firmly to the RJ45 jack s of the AWK-11 00. y Make sure the LED WLAN of the AP is blinking to indicate that the RF is work ing.
MOXA AirWorks AWK-1100 User’s Manual Troubleshooting B-2 TCP/IP Settings Problems Default Gateway of Client Computer AP IEEE 802 .1 1g S tage A S tate B Correspondent Host S tage D Client Computer D.
MOXA AirWorks AWK-1100 User’s Manual Troubleshooting B-3 y Are the IP ad dress of the client computer and the IP address of the AP on the same IP subnet? ¾ Use WinIPCfg.
MOXA AirWorks AWK-1100 User’s Manual Troubleshooting B-4 The AWK-1100 st ops working and does no t respond to Web management re quests. y The firmware of the AP m ay be stuck in an incorrect state. ¾ Unplug t he power connector from the power jack, and then re-plug th e connec tor to restart the AP.
C C Appendix C Regulatory Statement Federal Communication Commissi on Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant t o Part 15 of the FC C Rules.
MOXA AirWorks AWK-1100 User’s Manual Regulatory Statement C-2 Safety This equipment is designed with th e utmost care for the safety of those who install and u se it. However, spec ial attention must be paid to the dange rs of electric shock a nd static electricity when working with electrical equipment.
D D Appendix D Service Information This appen dix shows you how to contact M oxa for inform ation about thi s and other pr oducts, and how to repo rt problems.
MOXA AirWorks AWK-1100 User’s Manual Service Information D-2 MOXA Internet Services Customer satisfaction is our num b er one concern, and to ensure that c ustomers receive the full benefit of our products, Mo xa Internet Servi ces has been set up to p rovide technical sup port, driver updates, product infor mation, and user’s manual upd ates.
MOXA AirWorks AWK-1100 User’s Manual Service Information D-3 Problem Report Form MOXA AirWorks A WK-1 100 Customer name: Comp any: T el: Fax: Email: Date: 1.
MOXA AirWorks AWK-1100 User’s Manual Service Information D-4 Product Return Procedure For product repair, excha nge, or refund, the customer m ust: Provide e vidence of original p urchase. Obtain a Product Return Agreement (PRA) from the sales representative or dealer.
デバイスMoxa Technologies MOXA AirWorksの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Moxa Technologies MOXA AirWorksをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMoxa Technologies MOXA AirWorksの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Moxa Technologies MOXA AirWorksの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Moxa Technologies MOXA AirWorksで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Moxa Technologies MOXA AirWorksを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMoxa Technologies MOXA AirWorksの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Moxa Technologies MOXA AirWorksに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMoxa Technologies MOXA AirWorksデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
