MoxaメーカーVPort 16の使用説明書/サービス説明書
ページ先へ移動 of 67
Moxa VPort 16 - M12 User ’ s Manual First Edition, February 20 12 www.moxa.com/product © 2012 Moxa Inc. A ll rights reserv ed..
Moxa VPort 16 - M12 User ’ s Manual The software described i n this manual is furnished under a license agreement and may b e used only in accordance with the terms of that agreeme nt. Copyright Not ice © 2012 Moxa Inc. A ll rights reserv ed. Trademarks The MOXA logo is a registe red trademark of Moxa Inc.
Before G etting S tarted Before using your VPort 16 - M12, please pa y close attent ion to the follow ing instruction s: After opening the VPort 16 - M12 box, compare the contents of t he box with the Package Check list in Chapt er 1 . Notify your sales representative if any of the items are mi ssing or damaged.
Table of Conte nts 1. Introduction ...................................................................................................................................... 1-1 Overview ....................................................................
1 1. Introduction The VPort 16 - M12 is a rugged IP camera designed for use in harsh environments. In addition to being able to handle basic video feeds, many advanced features are also included to set up surveillance or web multimedia applications.
Moxa VPort 16 - M12 Introduction 1-2 Overview The VPort 16 - M12 is a comp act, fixed - IP camera with EN 50155:2007 compliance that is s pecially designed for rolling stock CCTV applications.
Moxa VPort 16 - M12 Introduction 1-3 Rugged design for m obile vid eo surveillan ce environm ents The VPort 16 - M12 is a r ugged IP c amera designed for mobile IP CCTV applications .
Moxa VPort 16 - M12 Introduction 1-4 Package Checklist The Moxa VPort 16 - M12 is shipped with the following it ems. If any of these it ems are missing or damaged, please conta ct your sale s representative for assistance.
Moxa VPort 16 - M12 Introduction 1-5 Product Features • 1/3” Sony CCD image sensor • 3D de - interlacing, for display on progressive video m onitors • Feature s white b alance (AT W/AWC); 3 D .
Moxa VPort 16 - M12 Introduction 1-6 Typical Applicat ion Product Description Appearance • Mounting sc rew: there are four nylock M4 screws for mo unting the VPo rt 16 - M12 on wal ls or ceiling s , giving an exter nal length of about 20mm.
Moxa VPort 16 - M12 Introduction 1-7 Top View • Base cover torx screw: To remove the top (base) cov er, you can us e the L type t orx screw driver. • Rota tion p late: this p late can be turned manually to fix t he horizo ntal position of the lens .
Moxa VPort 16 - M12 Introduction 1-8 Bottom View • PoE & Etherent M12 connector: A 4 - pin M12 A - code connecter for both PoE powe r supply (Mode A) and Auto MDI /MDI - X Ethern et connectio n s.
Moxa VPort 16 - M12 Introduction 1-9 Top view, with top (bas e) and dom ed cover rem oved • Calibrat ion for tun ing horizontal lens position (0 to 360 ° ): After horizontal ly positi oning th e lens, user s can mark the position for future placeme nt s or mas s installa tion.
2 2. Getting Started This chapter includes information about how to install a VPort 16 - M12 IP camera. The following t opics are cover ed in this chapter: Before Gett ing Started First - Time.
Moxa VPort 16 - M12 Getting Started 2-2 Before Getting Started In what follows, “ user ” refers to those wh o can access the IP camera , and “ administrator ” refers to the per son who knows the root passwor d that allows changes to the IP camera’ s configuration, in addition to pr oviding general access.
Moxa VPort 16 - M12 Getting Started 2-3 S tep 4: To tune lens pos ition , l oosen the scr ews that fix the camera’s horizontal and verti cal axes; next, us ers may position the cam era acc ording to pre viously mark ed calibrat ions, or via the VPort 16 -M12’ s web c onsole.
Moxa VPort 16 - M12 Getting Started 2-4 3. Users can dou ble click the se lected VPort, o r use the IE web browser to access the VPort ’ s web - based manager (web ser ver). Manual Address Assignment If your VPort 16 - M12 is connected to a netw ork that does not ha ve a DHCP server , then you will need to configure the I P address manua lly.
Moxa VPort 16 - M12 Getting Started 2-5 Step 5: Acc ess the VPort s ystem c onfigu ration . Click on System Con figuration to disp lay a system overview. The Model Name , Server Name , IP Address , MAC Address and Firmwa re Version will a ppear in the green bar at the top of the page.
Moxa VPort 16 - M12 Getting Started 2-6 VPort 16 - M12 Dimension (Unit=mm) Wiring Require ments ATTENTION Be sure to disconnect the p ower cord before installing and/or wiring your M oxa VPort 16 - M12. Calculate the maximum possib le current in each po wer wire and co mmon wire.
Moxa VPort 16 - M12 Getting Started 2-7 You should also pay attenti on to the following: • Use separate paths to route wiring for power and devices. If power wiring and device wiring paths must cross make sur e the wires are p erpendicular at th e intersection po int.
3 3. Accessing the VPort 16 - M12’s Web- based Manager This chapter in cludes information about how to access the VPort 16 - M12 IP camera for the first time.
Moxa VPort 16 - M12 Accessing the VPort 16 - M12’s Web - based Manager 3-2 Functions Fea tured on the V Port’s Web Homepage The homepage of the VPor t ’s web consol e shows informat ion specific to that VPort, the camer a image, and configurations for the client and server .
Moxa VPort 16 - M12 Accessing the VPort 16 - M12’s Web - based Manager 3-3 2. Protocol Opt ions: Choose one of four protocols to optimize your usa ge — Multicast (RTSP or Push) or Unicast ( UDP, TCP, HTTP ). • Multicast protocol ca n be used to send a s ingle video s tr eam to mult iple clients .
4 4. System Configuration After installing the hardware, the nex t step is to conf igure the V Port 16 - M12 ’s settings. User s can configu re by web console.
Moxa VPort 16 - M12 System Configura tion 4-2 System Configuration by Web Console System config uration can be done remotely w ith Internet Exp lorer. To access th e server, type t he system configuration URL, http://<I P address of V ideo Server> /overview.
Moxa VPort 16 - M12 System Configura tion 4-3 System General Setting s On the Gener al Settings pa ge, administr ators can set up the video Server nam e and the Date and T ime , which is displ ayed in the ima ge’s caption. Server name Setting Description Default Max.
Moxa VPort 16 - M12 System Configura tion 4-4 Date and T ime Setting Description Default Keep current date and time Use the curren t date and time as t he VPort’s tim e setting. Keep current d ate and time Sync with com puter time Synchroniz e VPort’s data and time setting w ith the local computer ti me.
Moxa VPort 16 - M12 System Configura tion 4-5 User’s Pr ivileges VPort products provide 10 user ac counts for accessing the VPort. Setting Description Default User Name Type a specific user name for user a uthenticatio n. None Password Type a specific password for user authentication.
Moxa VPort 16 - M12 System Configura tion 4-6 SD card Setting Description Default Reboot the system when the SD card fails to mount This function can reboo t the system when the SD card mount fail s to re - dete ct the SD mou nt. Enable NOTE The recorded videos will be stored in the “/VPortfolder” folder.
Moxa VPort 16 - M12 System Configura tion 4-7 System Log His tory The system log contains useful i nformation, including current s ystem configuration and activity history with timestamps for tracking. Administ rators can save this information in a file (system.
Moxa VPort 16 - M12 System Configura tion 4-8 System Paramet ers The System Parameters page allow s you to view al l system parame ters, which are li sted by categor y. The content is the same as the VPort’s sys_con fig.ini file. Adm inistrato rs can also save thi s informat ion in a f ile (sys_config .
Moxa VPort 16 - M12 System Configura tion 4-9 NOTE Upgrading the firm ware wi ll not cha nge the o riginal se ttings. Reset to Factory Default From the “ Reset to Factory De fault” page , click on OK (as shown in the following figure) to reset the VPort to its factory defa ult settings.
Moxa VPort 16 - M12 System Configura tion 4- 10 Access Met hod VPort products support the DHCP protocol, which means that the VPort can get its IP address from a DHCP server automatically when it is connected to a TCP/IP network. The Administrator should determine if it i s more appropri ate to use DHC P, or assign a fix ed IP.
Moxa VPort 16 - M12 System Configura tion 4- 11 NOTE For auto - configuration to work properly, the system should: 1. Have a DHCP Server that suppo rts DHCP Opt 6 6/67 in the network swi tches and rou ters.
Moxa VPort 16 - M12 System Configura tion 4- 12 The Apple Q uickTim e media pla yer is used h ere as an example o f a RTSP streaming applicatio n: Step 1: Open Apple Qu ickTime Player and select File - Open URL in New Play er . Step 2: When the following pop - up window appears, type the URL in the input box.
Moxa VPort 16 - M12 System Configura tion 4- 13 NOTE The video performance of the VPor t 16 - M12 may vary when using other media playe rs. For example, you will notice a greater delay when viewing the VPort 16 - M12’s video from the QuickTime pl ayer compared to viewing it directly from the VPort 16 - M12’s built - in web serve r.
Moxa VPort 16 - M12 System Configura tion 4- 14 NOTE Note tha t if the Sender’s email addres s is not set, a warning message will pop up and the e - mail sys tem will not be allowed to operate. NOTE The 2nd SMTP Server and Sender Email are backups that are used if the 1st SMTP Server and Sender Email fail when conn ecting or sendi ng email.
Moxa VPort 16 - M12 System Configura tion 4- 15 NOTE Whenever the syst em reboots, a sys tem log will be sent by email or FTP to show the log in status of the VPort . The system log will be sent to the S ender email address if the SMTP server settings are co rrect.
Moxa VPort 16 - M12 System Configura tion 4- 16 Universal P nP UPnP (Un iversal P lug & Play ) is a networking architecture that provides compatibility among the networking equipment, software, an d peripherals of the 400+ vendors that are pa rt of the Universal Plug and Play Forum .
Moxa VPort 16 - M12 System Configura tion 4- 17 The network WITHOUT Multicast The network WITH Multicast NOTE The VPort 16 - M12 is the sour ce that deliver s the multicast v ideo stream.
Moxa VPort 16 - M12 System Configura tion 4- 18 Accessible I P List The VPort uses an IP address - based filtering method to control access to the VPort. Accessible IP S ettings allow y ou to add or remov e “Legal” remote ho st IP addresses to prevent una uthorized access.
Moxa VPort 16 - M12 System Configura tion 4- 19 Protocol Version Security Mode Authentication Type Data Encryption Method SNMP V1, V2c V1, V2c Read Community Community s tring No Use a commu nity stri.
Moxa VPort 16 - M12 System Configura tion 4- 20 V1, V2c Read Community Setting Description Default V1, V2c Read Community Use a community string match fo r authentication, w hich means that the SNMP a gent accesses all objects with r ead - only permissions u sing the commu nity string pu blic .
Moxa VPort 16 - M12 System Configura tion 4- 21 Private MIB information The private SNMP Ob ject ID of the VPort is the enterprise value: 8691.8. 4.2 . This number cannot be c hanged. NOTE The MIB file is MOXA - VPO RT16 - MIB.mib (or.my). You can f ind it on the software CD or the download center of the Moxa websit e.
Moxa VPort 16 - M12 System Configura tion 4- 22 Setting Description Factory De fault Host Name User - defined name for iden tificatio n Blank Server 1, 2, 3, 4 The server ’ s URL add ress with comp lete CGI command s E x.
Moxa VPort 16 - M12 System Configura tion 4- 23 Basic The administrator can ad just the number of f ram es per second for each cha nnel. There are two types of frame rate status: L ive and Alar m. Live status ref ers to the nor mal frames rat es for live vid eo displays.
Moxa VPort 16 - M12 System Configura tion 4- 24 Setting Description Factory De fault Enable To enable or di sable the DynaStr eam functio n. Disable Duration This refers to the time perio d that DynaStre am is in operation.
Moxa VPort 16 - M12 System Configura tion 4- 25 Camera Se tting A few camera parameters can be configured for improving image quality according to the recordi ng environment. Setting Description Default Electronic Shu tter Set the electr ic shutter to Au to or Fixed .
Moxa VPort 16 - M12 System Configura tion 4- 26 Initiate th e ATW (Auto - Tracking Whi te balancing) fea ture, to calibrate the c amera to this lo cal white.
Moxa VPort 16 - M12 System Configura tion 4- 27 Resolution NTSC PAL SVGA 800 x 600 800x 600 Full D1 720 x 480 720 x 576 4CIF 704 x 480 704 x 576 VGA 640 x 480 640 x 48 0 CIF 352 x 240 352 x 288 QCIF 176 x 112 176 x 144 Max.
Moxa VPort 16 - M12 System Configura tion 4- 28 NOTE The image quality, FPS, and bandwidth are influenced significantly by network throughput, system network bandwidth management, applications the VPort runs (such as VMD), how complicated the image is, and the performance of your PC or notebook when displaying images.
Moxa VPort 16 - M12 System Configura tion 4- 29 Alarm Time Interval Setting Description Default Delay second(s) before detecting th e next alarm Set the minim um time interva l before another even t alarm is triggered.
Moxa VPort 16 - M12 System Configura tion 4- 30 Schedule A schedule is p rovided to set even t alarms for da ily security ap plications. Event Type Setting Description Default Video Lo ss, Digita l Input, CGI Event, and Sequential Snapshot Set up the sched ule of each kind o f event type.
Moxa VPort 16 - M12 System Configura tion 4- 31 Video Motion Detec tion Video Mo tion Dete ction (VM D) is an inte lligen t event alar m for video surveilla nce network systems. With th e 3 area - selectab le VMDs and sensitivity/per centage tun ing, administr ators can ea sily set up the VMD alar m to be active 24 hours a day, 7 days a week.
Moxa VPort 16 - M12 System Configura tion 4- 32 NOTE Once the Show alert o n the image when V MD is triggered is enabled, the red frames that appea r on the homepage image indicate the size of the VMD window set up by the administrator.
Moxa VPort 16 - M12 System Configura tion 4- 33 Video Loss The Video Loss event means that t he VPort cannot d etect the ca mera module . Video Los s Trigger Actions Setting Description Default Enable video lo ss alarm Enable or disable video loss alarm.
Moxa VPort 16 - M12 System Configura tion 4- 34 CGI Event The VPort can accept 5 CGI commands , which are sen t from externa l devices, su ch as ioLogik s eries Ethernet I/O, to be th e event alar ms . NOTE The VPort only can accept the CGI co mmands that fol low the VPort’s CGI commands forma t.
Moxa VPort 16 - M12 System Configura tion 4- 35 Alarm/Eve nt Alarm/Seq uential Snap shot With this featur e, the VPort can up load snapsho ts periodicall y to an external E - mail or FTP server as a live video source. Use the Send s equential s napshot imag e every sec onds opt ion to set the t ime interva l.
A A. Frequently Asked Questions Q: What if I forg et my password? A: Every access t o the IP camera need s authenticat ion, unless the ad min password is set up as blank. If you are one of the managed users, you will need to ask the administ rator for the password.
Moxa VPort 16 - M12 Frequently A sked Questio ns A-2 Q: How can I keep the I P camera as private as possible? A: The IP camera is designed for surveillance p urposes and has ma ny flexible interf aces. The user authenticatio n and special co nfirmation wh en installing can keep the vide o encoder from unauthorized access.
B B. Modbus Address Table Read/Write Registers (Supp ort Function Code 4 & Functi on Code 3) Address Access Data Type Description System Information 0x 0 000 R 1 word Vendor ID = 0x1393 0x 00 01 R.
Moxa VPort 16 - M12 Modbus Address Table B-2 0x0700 RW 1 word Record Duration 0x0701 RW 1 word Record Always Enable 0x0000: Disable 0x0001: Enable 0x0800 RW 1 word DynaS tream Duratio n 0x0801 RW 1 wo.
C C. Time Zone Table The hour offsets for diffe rent time zones are shown below. You will nee d this information when setting the time zone in automatic date/time synchronizatio n. GMT stands for Greenwic h Mean Time, which is the glo bal time that all time zo nes are measured from.
Moxa VPort 16 - M12 Time Zone Table C-2 (GMT+01:00) Belgrade, Bratislava , Budapest, Ljubljana , Prague (GMT+01 :00) Brus sels, Copenhagen, Madrid, Paris (GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb (.
D D. Technical Specifications Camera Sensor: 1/3” CCD Lens: 3, 3.6, 6, 8, an d 16 mm fixed focal length Angle of View (D iagonal): • 3.0 mm / F2.0: 120° • 3.
Moxa VPort 16 - M12 Technical Sp ecifications D-2 Power Requi rements Input: Power - over - Ether net (IEEE 80 2.3af) Power Consum ption: 6.5 W Physical Chara cteristics Housing: Metal and glass, optional PC dome cover, IP66 - rated Dehumid ifying Mem brane: GORE protective vent Dimension s: • Standard model: 125 x 125 x 109.
Moxa VPort 16 - M12 Technical Sp ecifications D-3 Software Dev elopment Kit VPort S DK PLUS: Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for thi rd - party developers (the latest version of SDK is vailable for download f rom Moxa’s website).
デバイスMoxa VPort 16の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Moxa VPort 16をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMoxa VPort 16の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Moxa VPort 16の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Moxa VPort 16で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Moxa VPort 16を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMoxa VPort 16の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Moxa VPort 16に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMoxa VPort 16デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。