Asante TechnologiesメーカーPCMCIAの使用説明書/サービス説明書
ページ先へ移動 of 17
USER'S MANUAL FriendlyNET PCMCIA Ethernet Adapter Asanté Technologies, Inc San Jose, CA December 2000 06-00598-00 Rev. A.
CONTENTS - P AGE 2 - TABLE OF CONTENTS 1. INTRODUCTION ............................................................................................................. 3 1.1. ABOUT THIS MANUAL .............................................................
INTRODUCTION - P AGE 3 - 1. INTRODUCTION Thank you for purchasing the Asanté FriendlyNET PCMCIA adapter. This adapter will let you easily connect a PC laptop or Macintosh PowerBook to a 10 Mbps Ethernet LAN. 1.1. ABOUT THIS MANUAL This manual will explain how to install and use your PCMCIA Ethernet card.
HARDWARE INSTALLATION - P AGE 4 - 2. INSTALLING THE FRIENDLYNET ADAPTER When installing your FriendlyNET PCMCIA card, please remember the following: Don’t use your PC Card near water Don’t disassemble your PC Card Read the warning marked on the back of your PC Card.
HARDWARE INSTALLATION - P AGE 5 - If you are connecting your laptop to a 10Base-2 network, connect the cable to the T- connector provided. If this laptop will be at the end of the cable, add a terminating resistor to the T-connector.
SOFTWARE INSTALLATION - P AGE 6 - 3. INSTALLING THE SOFTWARE 3.1.1. Windows 95 Installation Insert the PCMCIA Ethernet Card into PCMCIA slot. In the New Hardware Found dialog box, select Driver from disk provided by hardware manufacturer . Input the path, A: and insert the driver diskette.
SOFTWARE INSTALLATION - P AGE 7 - 3.1.2. Windows 98 / Me Installation Insert the PC Card into the slot. Windows will display an ADD NEW HARDWARE WIZARD dialog box. Press Next . Select “ Search for the best driver for your device (Recommended) ” and press Next .
SOFTWARE INSTALLATION - P AGE 8 - The driver will be installed; you may be asked for the original Windows 98 CD/disks. For a first time installation, please click the Network icon in Control Panel to add Protocols, Clients and Services, if needed. Reboot the machine and the card will be fully functional.
SOFTWARE INSTALLATION - P AGE 9 - Press Have Disk button Insert the driver disk into drive A: Specify the path to A: and press OK Windows will read the driver diskette and report that it has found the Asanté card.
SOFTWARE INSTALLATION - P AGE 10 - A dialog box will appear to adjust the driver's settings. You must select a unique I/O address, Interrupt line, and Memory address for the card. Press OK when all setting are completed. Press Close to accept the network settings and restart Windows when you are prompted.
SOFTWARE INSTALLATION - P AGE 11 - Select Search for a suitable driver for my device (recommended). Click Next. Select Floppy disk drives and insert the Driver Disk in the disk drive.
SOFTWARE INSTALLATION - P AGE 12 - Click Next to make Windows install the appropriate driver for the new device..
SOFTWARE INSTALLATION - P AGE 13 - Windows will warn that the driver file is not signed. Click Yes to continue. Click Finish to complete the software installation. 3.1.5. Macintosh OS Installation Insert the Install Driver Disk and double-click the installer.
SOFTWARE INSTALLATION - P AGE 14 - Select the appropriate driver for your PowerBook and click Install. Then click “Yes” to continue. Finally, choose “Restart” to reboot your system and complete the installation.
APPENDIX - P AGE 15 - 4. TROUBLESHOOTING TIPS In the unlikely event your network is not operating properly, follow the troubleshooting tips below. LEDs There are two diagnostic LEDs on the media coupler: LINK (green) – on when a network connection is made to a hub.
APPENDIX - P AGE 16 - 5. APPENDIX: PRODUCT SPECIFICATIONS IEEE 802.3 10BaseT, 10Base2 10Mbps speed Internal buffer memory, No system memory used Operating Environment Windows 95 Windows 98 Microsoft Windows NT 4.0 Microsoft Windows 2000 Windows Me Macintosh OS 8.
APPENDIX - P AGE 17 - encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the distance between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
デバイスAsante Technologies PCMCIAの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Asante Technologies PCMCIAをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAsante Technologies PCMCIAの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Asante Technologies PCMCIAの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Asante Technologies PCMCIAで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Asante Technologies PCMCIAを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAsante Technologies PCMCIAの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Asante Technologies PCMCIAに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAsante Technologies PCMCIAデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。