MultitechメーカーMultiModem ZPXの使用説明書/サービス説明書
ページ先へ移動 of 47
MultiModem ® ZPX MT5634ZPX-V .92-ISA Internal ISAData / F ax Modem User Guide.
MultiModemZPX User Guide MT5634ZPX-V.92-ISA P/N S000372D Revision D All rights reserved. This publication may not be reproduced, in whole or in part, without prior ex- pressed written permission from Multi-Tech Systems, Inc. Copyright © 2007 - 2009 by Multi-Tech Systems, Inc.
Contents MultiModemZPX User Guide iii Contents Chapter 1 - Introduction ....................................................................................................... ... 5 Product Description .................................................
Contents MultiModemZPX User Guide iv Canadian Limitations Notice .................................................................................................... ........ 31 Industry Canada .........................................................
1 Introduction 5 MultiModemZPX User Guide Chapter 1 - Intr oduction Congratulations on y o ur purchase of the MultiModem ® ZPX. Y ou hav e acquired one of the finest internal data/f ax modems availab le today from one of the world’ s oldest modem manufacturers: Multi-T e ch Systems, Inc.
1 Introduction 6 MultiModemZPX User Guide General features • Compliance with major ITU-T, TIA, and EIA international standards to ensure compatibility with other modems • Distinguishes data and fax calls • Compliance with the V.80 standard, allowing video conferencing over analog telephone lines with any H.
1 Introduction 7 MultiModemZPX User Guide Man ual Or ganization This User Guide will help y ou to install, configure, use, and troubleshoot your modem. The manual is divided into fiv e chapters and f our appendices: Chapter 1: Intr oduction. This chapter Introduces the MT5634ZPX, briefly descr ibing features and technical specifications .
1 Introduction 8 MultiModemZPX User Guide T e c hnical Specifications Trade Name MultiModemZPX Model Number MT5634ZPX Server-to-Client V.90 speeds when accessing a V.90 or V.92 server (actual Data Rates speed depends on server capabilities and line conditions) * Client-to-Server Up to 50Kbps when accessing a V.
1 Introduction 9 MultiModemZPX User Guide Command Buffer 40 Characters Transmission Level -11 dBm (North America and Pan Euro) - varies by country setting Frequency Stability ±0.
2 Installation 10 MultiModemZPX User Guide Chapter 2 - Installation What Y ou Will Need Bef ore star ting, please mak e sure you ha ve ev er ything you need: W e supply • An MT5634ZPX-V92 data/fax m.
2 Installation 11 MultiModemZPX User Guide Step 1 - Determine System Resour ces Bef ore you physically install y our new MultiModemZPX, you need to determine what system resources are in use on your system. The best w ay to check what resources are in use and which ones are av ailab le, run WINMSD Utility .
2 Installation 12 MultiModemZPX User Guide 4. Click on IRQs to display the used IRQs. The MultiModemZPX only uses IRQs 3,4,and 5 so you need to check in the above screen to see if any of these IRQs are available. The MultiModemZPX is defaulted to IRQ 5.
2 Installation 13 MultiModemZPX User Guide 6. Now, click on I/O to display the available I/O addresses. 7. The MultiModemZPX uses the following I/O addresses: COM1: 3F8-3FF COM2: 2F8-2FF COM3: 3E8-3EF COM4: 2E8-2EF and is defaulted to COM 4. 8. Record the available I/O address that you are going to use _______.
2 Installation 14 MultiModemZPX User Guide Step 2 - Configure J umper s The MT5634ZPX board contains se ven Berg jumpers f or setting the interr upt request (IRQ) number and COM port assignment. The jumpers are located on the lower part of the PC board as shown below .
2 Installation 15 MultiModemZPX User Guide Step 4 - Run Ad d Hard ware Wizar d 1. Click on Start I Control Panel I Add Hardware and the Add Hardware Wizard screen is dis- played. 2. Click on the Next button on the Add Hardware Wizard screen. The wizard will pause a few seconds trying to detect the new device.
2 Installation 16 MultiModemZPX User Guide Step 5 - Run Add Modem Wizar d 1. Place the MT5634ZPX-V92 CD in the CDROM drive and allow time for the CD to spin up. The MT5634ZPX-V92 AutoRun screen will appear. 2. Click on Start I Control Panel I Phone and Modem Options.
2 Installation 17 MultiModemZPX User Guide Step 7 - Connect Y our Modem to the T elephone Line The MultiModemZPX communicates over pub lic-s witched telephone network lines. Use the modular telephone cab le provided with the modem to connect the MultiModemZPX to your telephone wall jac k .
2 Installation 18 MultiModemZPX User Guide Step 8: Configure the Modem for Y our Countr y Before you use your modem, you must configure it for the country in which it will be used. You must also do this if you move the modem to another country after it has been configured for the first country.
3 Using Your Modem 19 MultiModemZPX User Guide Chapter 3 - Using Y our Modem Operating Y our MultiModemZPX If y ou’ re an experienced modem user , you ma y only want to chec k your modem’ s settings f or data compression, error correction, and so on.
3 Using Your Modem 20 MultiModemZPX User Guide 3. Save the file as ZPXTest.doc and exit WordPad . 4. Click Start | Programs | Accessories | Fax | Compose New Fax .
3 Using Your Modem 21 MultiModemZPX User Guide Setup Multi-T ech modems are shipped with a default setup pass word (MTSMODEM). F or secur ity measures, you should change the pass word. As an added security measure, also change the remote configuration escape character .
4 AT Commands and Fax Commands 22 MultiModemZPX User Guide Chapter 4 - A T Commands A complete A T Commands, S-Registers, and Result Codes Reference Guide can be f ound on the MT5634ZPX-V92 CD and on the Multi-T ech W eb site. F ax Commands F ax commands resemble A T commands, b ut are more complicated to use.
5 Troubleshooting 23 MultiModemZPX User Guide Chapter 5 - T r oubleshooting This chapter describes common problems y ou may ha ve with your modem and ho w to solve them.
5 Troubleshooting 24 MultiModemZPX User Guide remain connected until the program terminates. Some programs can disconnect without exiting the program. If this is the case, try issuing the software’s connection command. If more than one communications program is open, they may conflict with each other.
5 Troubleshooting 25 MultiModemZPX User Guide • If the modem reports BUSY , the other number may be busy. Try again later. BUSY also may indicate that 9 was not added to the phone number (if required to dial 9 for an outside line).
5 Troubleshooting 26 MultiModemZPX User Guide • If you were online with a commercial online service, it may have hung up because of lack of activity on your part or because you exceeded your time limit for the day. Try increasing the length of time in minutes the modem will wait before disconnecting when no data is sent or received.
Appendix A - Regulatory Compliance 27 MultiModemZPX User Guide Appendix A - Regulator y Compliance FCC P ar t 68 T elecom 1. This equipment complies with part 68 of the Federal Communications Commission Rules. On the outside surface of this equipment is a label that contains, among other information, the FCC registration number.
Appendix A - Regulatory Compliance 28 MultiModemZPX User Guide FCC P ar t 15 This equipment has been tested and f ound to comply with the limits for a Class B digital device , pursuant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interf erence in a residential installation.
Appendix A - Regulatory Compliance 29 MultiModemZPX User Guide Notice: The Industry Canada label identifies certificated equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements.
Appendix A - Regulatory Compliance 30 MultiModemZPX User Guide Ne w Zealand T elecom W arning Notice (1) The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network.
Appendix B - Updating Your Modem Firmware 31 MultiModemZPX User Guide Appendix B - Updating Y our Modem’ s Firmware Intr oduction Y our modem is controlled b y semi-per manent softw are, called fir mw are, which is stored in flash memor y . Firmware is nonv olatile; that is, it remains stored in memor y when the modem is tur ned off .
Appendix B - Updating Your Modem Firmware 32 MultiModemZPX User Guide 4. If the current firmware version is greater than the firmware version number found in Step 1: Identify the Modem Firmware , your modem has an older firmware version. Continue with Step 3: Download the Upgrade File .
Appendix B - Updating Your Modem Firmware 33 MultiModemZPX User Guide Click Start | Settings | Control Panel , then double-click Services . Select Remote Access Server and click Startup... . Select Manual as the Start Up Type and click OK . If you are using a Fax service in NT, change its Start Up Type to Manual .
Appendix C - ASCII Conversion Chart 34 MultiModemZPX User Guide Appendix C - ASCII Con version Char t CTRL CODE HEX D EC CODE HEX DEC CODE HEX DEC CODE HEX DEC @ NUL 00 0 SP 20 32 @ 40 64 ` 60 96 A SO.
Appendix D - WEEE 35 MultiModemZPX User Guide Appendix D – W aste Electrical and Electronic Equipment (WEEE) The WEEE directive places an obligation on manufacturers, distributors and retailers to take-back electronics products at the end of their useful life.
Glossary 36 MultiModemZPX User Guide A Analog signal: A wav e f or m which has amplitude, frequency and phase, and which takes on a r ange of values between its maximum and minimum points. Analog T ransmission: One of two types of telecommunications which uses an analog signal as a carrier of voice, data, video , etc.
Glossary 37 MultiModemZPX User Guide business P ABX or any residential phone connects to the PSTN at a central office. Centre x: A multi-line service offered by operating telcos which provides, from the telco CO , functions and features comparab le to those of a PBX for large business users .
Glossary 38 MultiModemZPX User Guide Serial Bus. The Device Address is the Def ault Address when the Universal Serial Bus device is first po wered or reset.
Glossary 39 MultiModemZPX User Guide Fax (facsimile): Refers to the bit-mapped rendition of a graphics-oriented document (f ax) or to the electronic transmission of the image over telephone lines (f axing).
Glossary 40 MultiModemZPX User Guide request attention from a host. The host typically invokes an interrupt service routine to handle the condition which caused the request. I/O Addresses: Locations within the I/O address space of your computer used by a device, such as an expansion card, a serial port, or an inter nal modem.
Glossary 41 MultiModemZPX User Guide Megacom: An A T&T ser vice with a nor mal W A TS line (typically T1) between the customer premise and the A T&T ser ving class 4 CO are the customer’ s responibility . MegaLink: BellSouth’ s leased T1 ser vice.
Glossary 42 MultiModemZPX User Guide link stations) associated with a node, as requested b y an SSCP via an SSCP-PU session. An SSCP activates a session with the physical unit in order to indirectly manage , through the PU, resources of the node such as attached links.
Glossary 43 MultiModemZPX User Guide S Serial P ort: The connector on a PC used to attach seri al devices (those that need to receiv e data one bit after another), such as a mouse, a pr inter or a modem. This consists of a 9- or 25-pin connector that sends data in sequence (bit by bit).
Glossary 44 MultiModemZPX User Guide f acility into two or more channels by allotting the common channel to sev eral different inf or mation channels, one at a time. Time Slot: One of 24 channels within a T1 line. Each channel has a 64 Kbps maximum bandwidth.
Glossary 45 MultiModemZPX User Guide V .54: The ITU-T standard for local and remote loopback tests in modems, DCEs and DTEs. The four basic tests are: • local digital loopback (tests DTE send and re.
Index 46 Inde x Symbols 11-bit operation ................................................. 5 33.6K bps ......................................................... 5 A adaptive ans we r ................................................ 5 ASCII Conv ersion Char t .
Index 47 V V .1 7 .................................................................. 8 V .2 2 .................................................................. 8 V .22bis .............................................................. 8 V .27ter .....
デバイスMultitech MultiModem ZPXの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Multitech MultiModem ZPXをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMultitech MultiModem ZPXの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Multitech MultiModem ZPXの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Multitech MultiModem ZPXで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Multitech MultiModem ZPXを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMultitech MultiModem ZPXの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Multitech MultiModem ZPXに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMultitech MultiModem ZPXデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
