NaimメーカーNAP 200の使用説明書/サービス説明書
ページ先へ移動 of 44
OWNERS MANUAL PREAMPLIFIERS INTEGRATED AMPLIFIERS,POWER AMPLIFIERS ENGLISH DEUTSCH FRANÇAIS ITALIANO.
SAFETY INSTRUCTIONS In order to comply with current European safety regulations it is essential that the Naim loudspeaker connectors supplied with amplifiers and loudspeakers are used. Do not under any circumstances allow anyone to modify your Naim equipment without first checking with the factory, your retailer, or your distributor.
E1 1 Connections It is i mp or ta nt fo r bo th sa f et y a nd pe rf o rm an ce th at the standard cables supplied are not modified. 1.1 Interconnect Cables If options are available with your equipment and installation, DIN interconnect sockets should be used in preference to RCA Phono sockets.
E2 3 General Installation Naim equipment is designed to offer the finest pe rf or ma nc e po ss ib le av oi di ng c om pr om is e wh er ev er p ra ct ic al .
E3 NAC 552 Preamplifier 4 NAC 552 Introduction and Installation The NAC 552 preamplifier does not incorporate an internal power supply and can be used only in conjunction with the NAC 552PS power supply. Diagram 5.3 illustrates connection of the NAC 552 to its power supply.
E4 NAC 552PS NAC 552 Preamplifier 4.3 Socket Types and Assignment Defaults Input Socket Socket Source Button Number Features Assignment Default 1 DIN input Not assigned 2 DIN input CD 3 DIN input TUNE.
E5 NAC 552 Preamplifier 5.3 NAC 552 Connected to NAC 552PS mains input and fuse Note: For best performance the Burndy and 5 pin DIN cables should be run as close together as possible.
E6 NAC 252 Preamplifier 7 NAC 252 Introduction and Installation The NAC 252 preamplifier does not incorporate an internal power supply and can be used only in conjunction with the Supercap power supply. Diagram 8.3 illustrates connection of the NAC 252 to its power supply.
E7 NAC 252 Preamplifier 8.3 NAC 252 Connected to Supercap mains input and fuse Note: For best performance the Burndy and 5 pin DIN cables should be run as close together as possible. t o s t e r e o p o w e r ampliers to mono or dual mono power ampliers additional signal output 8.
E8 NAC 282 Preamplifier 10 NAC 282 Introduction and Installation The NAC 282 preamplifier does not incorporate an internal power supply but must be used in conjunction with either a Naim power amplifier incorporating a preamplifier power output, or with an appropriate Naim power supply.
E9 NAC 282 Preamplifier t o p o w e r a m p l i e r with i n t e r n a l p o w e r supply 11.2 NAC 282 Rear in 1 cd in 2 tuner in 3 tape in 4 av signal ground in 6 (alternative) c d / R C A Phono .
E10 NAC 282 Preamplifier 11.4 NAC 282 Connected to Hi-Cap and NAPSC mains input and fuse to stereo power ampliers t o m o n o o r d u a l m o n o p o w e r ampliers a d d i t i o n a l signal ou.
E11 NAC 202 Preamplifier 13 NAC 202 Introduction and Installation The NAC 202 preamplifier does not incorporate an internal power supply but must be used in conjunction with either a Naim power amplifier incorporating a preamplifier power output, or with an appropriate Naim power supply.
E12 NAC 202 Preamplifier t o p o w e r a m p l i e r with i n t e r n a l p o w e r supply 14.2 NAC 202 Rear in 1 cd in 2 tuner in 3 tape in 4 av in 5 aux 1 in 6 aux 2 c d / R C A Phono ch1(L) ch2.
E13 NAC 152 XS Preamplifier 16 NAC 152 XS Introduction and Installation The NAC 152 XS preamplifier does not incorporate an internal power supply but must be used in conjunction with either a Naim power amplifier incorporating a preamplifier power output, or with an appropriate Naim power supply.
E14 E15 NAC 152 XS Preamplifier to power amplier with internal power supply 17.2 NAC 152 XS Rear ch 1 - ve nc nc ch 2 cd, tu n, hdd, av, and aux inputs +ve - ve +ve ch1 ch 2 Alte rnativ e aux 2 input Note: The NAC 152 XS AUX 2 input is provided with two sockets.
E15 NAC 152 XS Preamplifier 17.3 NAC 152 XS Connected to FlatCap XS Power Supply (stage 1 upgrade) mains input and fuse p o w e r switch f o r p r e a m p l i e r s t a g e 2 u p g r a d e , C D 5 X S , H e a d l i n e o r p h o n o s t a g e . A d d i t i o n a l interconnects required.
E16 17.4 NAC 152 XS Connected to Hi-Cap and FlatCap XS Power Supplies (stage 2 upgrade) mains input and fuse p o w e r switch f o r C D 5 X S , H e a d l i n e o r p h o n o s t a g e .
E17 SUPERNAIT Integrated Amplifier 19 SUPERNAIT Introduction and Installation The Supernait should be installed on a dedicated equipment stand intended for the purpose. Do not stand it directly on top of another item of equipment. Care should be taken to ensure that it is level.
E18 SUPERNAIT Integrated Amplifier 19.3 Digital Input Assignment The default digital input socket assignment illustrated in T able 19.2 may be changed if desired. Each selection button may be assigned to any one of the four rear panel digital input sockets.
E19 SUPERNAIT Integrated Amplifier 20 SUPERNAIT Controls and Connections 20.1 SUPERNAIT Front volume mute s o u r c e bank r e c o r d bank source and record selection h e a d p h o n e output c o m b i n e d a n a l o g u e a n d digital input 20.
E20 SUPERNAIT Integrated Amplifier 20.3 SUPERNAIT Connected to Hi-Cap Power Supply mains input and fuse 20.4 SUPERNAIT Connected to NAP 200 Power Amplifier mains input and fuse cable direction marker .
E21 20.5 SUPERNAIT Connected to Hi-Cap Power Supply and NAP 200 Power Amplifier mains input and fuse cable direction marker 4 to 4 pin DIN Interconnect Cables 240° 5 to 5 pin DIN mains input and fuse.
E22 NAIT XS Integrated Amplifier 22 NAIT XS Introduction, Installation and Connections The NAIT XS should be installed on a dedicated equipment stand intended for the purpose. Do not stand it directly on top of another item of equipment. Care should be taken to ensure that it is level.
E23 NAIT XS Integrated Amplifier Note: The AV Bypass feature must be used with care. It bypasses the NAIT XS volume control leaving any signal connected to the av input to be passed to the speakers at full volume. Note: The mute function is disabled when AV Bypass is engaged.
E24 NAIT XS Integrated Amplifier 23.2 NAIT XS Rear s i g n a l ground a u x 2 in & p o w e r out R S 2 3 2 inter face remote in m a i n s input and fuse left speaker right speaker p o w e r p o w e r a m p i n a n d p r e a m p o u t . L i n k p l u g tted.
E25 NAIT XS Integrated Amplifier mains input and fuse cable direction marker 4 to 4 pin DIN Interconnect Cables 240° 5 to 5 pin DIN 23.4 NAIT XS Connected to Hi-Cap Power Supply and NAP 200 Power Amplifier mains input and fuse p o w e r mains input and fuse Note: The NAIT XS should remain connected to mains power at all times.
E26 NAIT 5 i Integrated Amplifier 25 NAIT 5i Introduction and Installation The Nait 5 i should be installed on a dedicated equipment stand intended for the purpose. Do not stand it directly on top of another item of equipment. Care should be taken to ensure that it is level.
E27 26.2 NAIT 5 i Rear p o w e r m a i n s input and fuse tuner input (DIN) tuner input (RCA Phono) CD input (DIN) CD input (RCA Phono) hdd in av in 27 NAIT 5 i Specification Input Sensitivities: 225m.
E28 Preamplifier and Integrated Amplifier Operation 28 Preamplifier and Integrated Amplifier Operation Many operational and control features of Naim preamplifiers and integrated amplifiers are common to all and are based on a similar user interface.
E29 Preamplifier and Integrated Amplifier Operation Note: The Unity Gain feature must be used with care. It effectively by-passes the preamplifier volume and balance controls leaving any signal connected to a Unity Gain input to be passed to the power amplifier and speakers at full volume.
E30 28.10 Interface Function Buttons and Keys Amplifier Program Auto Input AV Integration Restore Mode Switching (Unity Gain) Defaults NAC 552 hold pre N/A N/A N/A handset key (R-com) hold prog pre 4 .
E31 R-com Remote Handset 29 R-com Remote Handset The R-com remote handset is supplied with the NAC 552 and CD555 and can be purchased as an accessory. It offers quick and intuitive control of the most often used functions of CD players, preamplifiers, integrated amplifiers and tuners.
E32 NARCOM 4 Remote Handset 30 NARCOM 4 Remote Handset The NARCOM 4 remote handset is supplied with the NAC 552, NAC 252, NAC 282, NAC 202, NAC 152 XS, Supernait, Nait XS and Nait 5i. It is a multi-functional remote control handset designed to be used with Naim Audio CD players, integrated amplifiers, preamplifiers, preset tuners and subwoofers.
E33 NAP 500 Power Amplifier 31.1 General Connections Notes The negative input and output connections for each channel are common. The mains earth (ground) should always be connected regardless of what other equipment is used in conjunction with Naim power amplifiers.
E34 NAP 500 Power Amplifier signal i n p u t c h 1 (L) signal input ch2(R) mains input and fuse left speaker right speaker cable direction marker NAP 500PS Bur ndy Interconnect Cables Input Ch1 Input .
E35 34.1 General Connections Notes The negative input and output connect ions for each channel are common. The mains earth (grou nd) shoul d always be connected regardless of what other equipment is used in conjunction with Naim power amplif iers.
E36 NAP 300 Power Amplifier signal input ch1(L) signal input ch2(R) mains input and fuse left speaker right speaker cable direction marker NAP 300PS Bur ndy Interconnect Cables Input Ch1 Input Ch2 ch .
E37 37.1 General Connections Notes The negative input and output connections are all common. The mains earth should always be connected regardless of what other equipment is used. This only grounds the case and the electrostatic screen within the transformer , and is not connected to the signal negative.
E38 40.1 General Connections Notes The negative input and output connections are all common. The mains earth should always be connected regardless of what other equipment is used. This only grounds the case and the electrostatic screen within the transformer , and is not connected to the signal negative.
E39 43.1 General Connections Notes The negative input and output connections are all common. The mains earth should always be connecte d regar dless of what other equip ment is used. This only grounds the case and the electrostatic screen within the transfo r mer , and is not conne cted to the signal negativ e.
E40 46.1 General Connections Notes The negative input and output connections are all common. The mains earth should always be connected regardless of what other equipment is used. This only grounds the case and the electrostatic screen within the transformer , and is not connected to the signal negative.
E41 49.1 General Connections Notes The ma ins earth gro unds only the case and th e elec trost atic scre en withi n the tra nsformer and is not conn ected to the sig nal nega tive. The mai ns earth mus t always be connected to “ground” regardless of any other equi pment us ed.
E42 Declarations of Confor mity Products that display the crossed-out wheeled bin logo cannot be disposed of as domestic waste. These products must be disposed of at facilities capable of re-cycling them and appropriately handling any waste by-products.
デバイスNaim NAP 200の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Naim NAP 200をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNaim NAP 200の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Naim NAP 200の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Naim NAP 200で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Naim NAP 200を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNaim NAP 200の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Naim NAP 200に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNaim NAP 200デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
