NECメーカー2000の使用説明書/サービス説明書
ページ先へ移動 of 137
.
First Printin g — Janu ary 2001 Copyri ght 2001 NEC Co mputers I nc. 15 Busi ness Park Way Sacrament o, CA 95828 All Rights Reserved Proprietary Notice and Lia bility Disclaimer The information disclosed in this docu ment, including all de signs and related materials, is the v aluable property of NEC Computers Inc.
Contents iii Contents Using This Guide Text Conventions ............................................................................................x Related Documents ...................................................................................
iv Contents Software ............................................................................................ 1-16 Preloaded Softw are .................................................................. 1-16 NEC Product Recov ery CD................
Contents v Using the Smart R estore Program .................................................... 3-34 How to Load Smart R estore ..................................................... 3-35 Software R estore or Remova l .................................
vi Con tents 6 Getting Services and Support NECC Website ............................................................................................ 6-2 NECC FTP Site ...................................................................................
Contents vii Dimensions .................................................................................................B-9 System ................................................................................................B-9 Keyboard ..........
Using This Guide ix Using This Guide The Pow erMate ® 20 00 Series User’s Guide provides a com prehensive reference to information about your system. The guide cont ains the following inform ation: ! Chapter 1, R eviewing System Features , provides a look at the front, side, rear, and bottom features of the syst em.
x Using This Guide Prolonged or improper u se of a com puter workstatio n may pos e a risk of seriou s injury. T o reduce y our risk of injury, set up and u se your computer in the ma nner descri bed in App endix A, Setting Up a He althy Work Environ ment.
Using This Guide xi Related Docu ments In addition to this guide, the follo wing printed doc umentation ships with yo ur s y st e m. ! NEC Pow erMate 2000 Series Quick Setup/Quick Reference The Quick Set up s ho ws how to quic kl y get t he sys te m connec ted a nd powered on .
1 Review ing System Featur es ! Front Features ! Right Side Features ! Left Side Feature s ! Rear Features ! Bottom Features ! Microdesktop Chassi s ! System Ov erview.
1-2 Review ing Syst em Featu res Prolonged or improper u se of a com puter workstatio n may pos e a risk of seriou s injury. T o reduce y our risk of injury, set up and u se the c omputer in t he man ner describe d in Appendix A, “Setting Up a H ealthy Work Environ ment.
Reviewing Sy stem Features 1-3 PowerMate 2000 system unit front features A – CD-ROM Drive F – Diskette D rive B – CD-ROM Drive Lamp G – Diskette Eje ct Button C – CD-ROM Disc Eject Button H .
1-4 Reviewing System F eature s System Controls and Lamps System unit con trols include a power/sl eep button, power lamp, sl eep lamp, and hard drive activity lamp. ! Power/sl eep button To turn sy stem unit and LCD panel power on , press the power/s leep button.
Reviewing Sy stem Features 1-5 LCD Panel The system com es with an LCD panel that you can adjus t up or dow n and side-t o-side for a comf ortable view ing position . The panel u ses a 15-in ch, twiste d nematic Thin F il m Transis tor (TFT) Super Video G raphi cs Array (SVGA) color screen .
1-6 Reviewing System F eature s CD-ROM Drive All s ystems c ome wit h a 24 X or hi gher Ma x Sli m vari able speed CD-ROM drive. Use th e CD-ROM drive to load and start program s from a compact disc (CD). You can also use the CD-ROM drive to play your audio CD s.
Reviewing Sy stem Features 1-7 Right Side Fea tures The following figure s hows the features on the righ t side of the sys tem unit. Brief descriptions of the features follow the figure.
1-8 Reviewing System F eature s Audio Connectors Your sy stem unit has th e follow ing audio connectors : ! Microphone in j ack Use this jack to conn ect a microphone f o r recording audio inf or mation in your data files.
Reviewing Sy stem Features 1-9 Left Side Features The following figure sh o ws the features on the left side of the system unit. Brief descriptions of t he features follow the figure.
1-10 Review ing Syst em Featur es System Unit F ans The sys te m’s tw o fans cool sy stem unit compon e nts and prev ent them from overheating . Keep the area near the f an vents clear for proper ventilation. The fans are inside the syste m unit, and the vents are on the left side and top of the unit.
Reviewing Sy stem Features 1-11 PS/2 Mouse Port The sys tem unit comes with a m ouse port that supports a personal sy stem/2 ® -compatible (PS/2-co mpatible) mouse with a 6-pin mini DIN conn ector. Use this port to conn ect the PS/2 mouse shipped w ith your system.
1-12 Review ing Syst em Featur es Optional Modem Connector Some sy stems might come with an opti onal V.90 56K modem board in place of the LAN board. Us e the modem connector on th e rear of the system to connect your telepho ne line to the system. VGA Connector The system un it comes with a VGA connector on the rear of the system unit.
Reviewing Sy stem Features 1-13 Bottom Fea tures A panel on the botto m of the system unit covers the two memor y expansion s ockets and the password clear jum per. (See Chapter 4, “Adding Expansion Devices,” for i nformation on re moving the panel.
1-14 Review ing Syst em Featur es The modu les use synchron ous dynamic random access memory (SDRAM). Memory allocation is controlled by Dyna mic Video Memory Technology (DVMT). With DVMT , total system memory is shared between sy stem memory and vi deo memory.
Reviewing Sy stem Features 1-15 System Overview The system h ard ware and softw a re deliver the perform ance and technologies needed for all you r challenging tasks today an d into the futur e.
1-16 Review ing Syst em Featur es Softwar e NEC provides a variety of so ftware applications and hardware utilities with your system to let you take advantage of your hard ware capabilities. Preload ed Softwar e Your sys tem comes prel oaded with t he Microsoft ® Wi ndows ® 98 SE operating system or with t he Win dows ® 2000/Win do ws N T ® 4.
Reviewing Sy stem Features 1-17 ! Intel LANDesk ® Client Mana ger Use LANDesk software to track system i nformation such as serial number, BIOS version , memory capacity, disk capacity, expan sion board settings, and applications. Use LANDesk software for remote starts from a server computer using Wak e-On LAN and rem o te reboot.
1-18 Review ing Syst em Featur es ! Security Lock Slot The security lock s lot on the rear of th e system accepts a Kensington ® Security Standard connector or oth er locking device. Secure the locking dev ice to the security lock slot an d to an immovable object to protect y our system from t heft.
2 Setting Up th e System ! Cable Connections ! Startup ! Shutdown ! Power-Saving Opera tion ! System Care ! More In formation.
2-2 Sett ing Up th e Syst em This chapter provides basic infor mation for setting up and using your system (refer to the Quick Setup poster for details). Included are cable connections, sys tem startup procedures , system shut down procedures, an d system care.
Setting Up the System 2- 3 If a problem occurs, a series of beeps might soun d. If this happens repeatedly a fter pow ering on, power off t he sys tem and go to C hapter 5, “Solv ing System Problems.” The chapt er provides helpfu l hints for solving s yste m proble ms.
2-4 Sett ing Up th e Syst em 4. Click Start on the taskbar, then po int to and click Shut Down . Select Shut down the comput er , then click Yes or press Enter for shut down , depending on your operati ng sys tem. ! If th e system is conf igured w ith Win dows 98 or Win dows 2000, the system shuts do wn automatically after a short interval.
Setting Up the System 2- 5 System Care The system is a durable system built for dep endable use. With protective measures and proper care, y ou can prevent problem s a nd prom ote the successful op eration and long life span of t he system.
2-6 Sett ing Up th e Syst em ! Position the system awa y from direct sunlight and extreme hot and cold temperatures. The recomm e nded operatin g envi ronment is from 50°F to 95°F (10°C to 35°C). The recomm e nded non- operating env ironment (shippin g or storag e) is from 14°F to 158° F (-10° C to 70°C ).
Setting Up the System 2- 7 Moving or Shipping Your System Use these steps to prepare the system for moving or sh ippi ng. 1. Back up your files on the hard drive to diskettes, ser ver hard drive, or othe r ba ckup d evic es.
2-8 Sett ing Up th e Syst em More Information Once the system is up and run ning, we sugg est that you do the f ollowing. ! See “Setting Up a Healthy Work Env ironment” in Appendix A. ! Inst all applicati ons provided by NECC on the Pow erMate Applicat ion and Driver CD .
3 Configuring the Sy stem ! Configuration Tools and Utilities ! BIOS Se tup Utili ty ! Hard Drive Security ! FLASH Utility ! NEC INFO Center ! NEC Product Recovery CD ! PowerMate Appli cation and Driv.
3-2 Configuring the System This chapter provides infor mation on configuring your system. T he chapter includes information on: ! Phoen ix ® Tec hnolo gie s Ltd .
Configuring the System 3-3 Configuration Tools and Utiliti es Configuration Method, Tool, or Utility Hard drive, r eformatting NEC Product R ecovery CD Hard drive, r epartitionin g NEC Product R ecove.
3-4 Configuring the System BIOS Setup Utility The BIOS Setup Utilit y lets you configure the main co mponents of your system. The utility is reside nt in the system FLASH me mory and does not require a dis kette or an operating system present to run. Your system ships from the factory with the correct sy stem parameters for your c onfi gura tio n.
Configuring the System 3-5 ! Security Use this m e nu to set User and Su pervisor Passwords , security mode, passw ord on boot, ne twork boot, and v irus check. ! Power — Use the Pow er Menu to set power manag e ment parameters such as p ower sa vin gs, auto s uspe nd timeo ut, hard disk t imeo ut, and sys tem swi tch.
3-6 Configuring the System Menu items preceded by a > contain a submenu of selectable fields for setti ng sys te m para mete rs. D ispla y a s ub menu b y usin g the up or do wn arrow keys to move the cursor to the desired sub menu, then press Enter .
Configuring the System 3-7 Main Menu Items Menu Item Settings (default is bold) System Time Set syst em time in this field. Press Tab or Enter to move be tween hour, minute , and second fiel ds. Example: 09:30:50 System Date Set system d ate in this fie ld.
3-8 Configuring the System Main Menu Items Menu Item Settings (default is bold) Primary IDE Master Primary IDE Slave Secondary IDE M aster Secondary IDE Slave 10263 M B None CD-ROM None Note: The fo llowing setting informat ion applies to t he primary and secondary master and slave device s.
Configuring the System 3-9 Main Menu Items Menu Item Settings (default is bold) Type User, Au t o , None, CD-ROM, ID E/ATAPI Removabl e When set to Aut o, the values for Cy linders, Heads, Sect ors, Total Sector s, and Maximum Capacity are d isplayed but are re ad only.
3-10 Configuring the System Main Menu Items Menu Item Settings (default is bold) Multi-Sector T ransfers Disab led, 2, 4, 8, 16 sectors Determine s the number of sectors per block for multi- sector tr ansfers. When Type is Auto, value in Multi-Sector Transfers fie ld is auto-detected and field is read only.
Configu ring the Sy stem 3-11 Main Menu Items Menu Item Settings (default is bold) Keyboard Featur es P ress Ente r to check or change key board parameters. Numlock Auto, On, Off Selects the p ower-on state for N umlock. Key Click Disabled , Ena bled Enables or disables key click.
3-12 Configuring the System Main Menu Items Menu Item Settings (default is bold) Extended M emory Display s amount of extended memory detected during boot. This field i s read-only and ca nnot be changed from BIOS Setup. Example: 128000 KB BIOS Revision Displays the BIOS revision number.
Configu ring the Sy stem 3-13 Advanced Menu Menu Item Settings (default is bold) Plug and Play OS No, Yes Select Y es if you are booting a Plug and Play capabl e operating syste m.
3-14 Configuring the System Advanced Menu Menu Item Settings (default is bold) Cache Base 0-512K Uncached, Write T hrough, Write Protect, Write Back Controls cach ing of 512K base memory. Cache Base 512-640K Uncached, Write T hrough, W rite Protect, Write Back Controls cach ing of 512K-640K base memory .
Configu ring the Sy stem 3-15 Advanced Menu Menu Item Settings (default is bold) I/O Device Config uration Press Ente r to access t he following submenus. Serial Port A Disabled, Enable d , Auto Setting at E nabled allow s the user to configure the port.
3-16 Configuring the System Advanced Menu Menu Item Settings (default is bold) Floppy Di sk Contro ller Disabled, Enable d , Auto Setting at E nabled allow s the user to configure the control ler. Setting at A uto enables the BIOS or operating system to configure t he controller.
Configu ring the Sy stem 3-17 Advanced Menu Menu Item Settings (default is bold) Clear All DM I Event Logs No , Yes Sel ect ing N o pr even ts clea ring out t he DIMM event logs. Event Logging Enabled , Dis abled Selecting Enab led permits lo gging of DM I events.
3-18 Configuring the System Security Menu Items Menu Item Settings (default is bold) Supervisor Pas sword Is Clear , Set Status only, user cannot mo dify. Supervisor passw ord control s access to the BIOS Set up Utility. User Passw ord Is Clear , Set Status only, user cannot mo dify.
Configu ring the Sy stem 3-19 Security Menu Items Menu Item Settings (default is bold) Security M ode Press Ente r to access the Se curity Mode. Use this mod e to select Passwo rd (default), SmartCard, or F ingerPrint. Pres s Enter to open the selected fi eld.
3-20 Configuring the System Security Menu Items Menu Item Settings (default is bold) Network Boot Set ting Press Ente r to access. Keyboard/M ouse Lock Disabled , Ena bled Select Enabled to lock the keyboard and mouse w hen remote boo ting. Virus Chec k Remind er Disabled , Daily, W eekly, M onthly Displays re minder message at bootup.
Configu ring the Sy stem 3-21 Power Menu Choose the Pow er Menu by selecting Power in t he legend bar on th e Main Menu screen. Other Power Menu options are available by selecting subme nus. Use the arrow keys to select one of the Power Menu options and press Enter to select a subm enu.
3-22 Configuring the System Power Menu Settings Menu Item Settings (default is bold) System Switch Sleep Button , Power Butto n Select Pow er Button to turn t he system on or off. Resume On M odem Ring Off , On Setting to On allows the system to wake up when an in coming call is d etected on the modem (if in stalled).
Configu ring the Sy stem 3-23 Boot Menu Settings Menu Item Settings (default is bold) Restore On AC/Pow er Loss Power Off, Last State , Power On Power Off settin g keeps power off until power button is presse d. Last State setting restores th e previous state before pow er loss occurred.
3-24 Configuring the System Boot Menu Settings Menu Item Settings (default is bold) Removabl e Devic es Press Ret ur n Operating sy stem assigns drive letters to t he devices in this list and in the order displayed.
Configu ring the Sy stem 3-25 Hard Drive Securi ty Your NEC PowerMate 2000 s ystem allows est ablishi ng passw o rd protection for the internal hard drive. Hard disk drive (HDD) password protection restricts acces s to the drive only if the drive i s removed from the Pow erMate 2000 system an d install ed i n anothe r system .
3-26 Configuring the System 4. Enter a master HDD password and press Enter . The syst em prom pts you to reenter the password to verify . 5. Reenter the master HDD password and press Enter . The system confirms the creation of the master password and prompts you to enter a user pas s word.
Configu ring the Sy stem 3-27 If you set th e master and user pa ssword on a hard drive, y ou can never remov e the passwords. You can change the passw ords. If you forg et the master pa ssword an d insta ll the dr ive in another syst em, you canno t access the data on the h ard drive.
3-28 Configuring the System FLASH Utility The system BIOS resides on a flash read only memory (ROM) chip in your s yste m. T he FLAS H ROM can b e upd ated usin g the follo wing procedure. Bef ore starting the BIOS update, w e recommends that y ou first contact NECC for as sistance (see Chapter 6 for con tact information).
Configu ring the Sy stem 3-29 NEC INFO Cente r The online NEC INFO Cent er provides quick acce ss to information abou t your sy stem. The INFO C enter includes th e following m odules. ! Tou r Use Tour to find infor mation about easy-to-use NECC printed and onlin e documentation, sof tware inst allation t ools, an d many support services.
3-30 Configuring the System NEC INFO Center opening screen To uninstall the NEC INFO Center, use these steps . 1. At th e Windows desk top, click Start , poin t to Settings , and click Control Panel . 2. At the Control Panel, double click Add/Remove Programs .
Configu ring the Sy stem 3-31 NEC Product Reco very CD The NEC Product Recovery program allows you to go back to the original software shipped on your system. You can reinstall valuable so ftware with the orig inal hardware settings sh ipped from the factory .
3-32 Configuring the System Using the Product Recover y CD The Product Recovery program main menu off er s the fol lowing opt ions: ! Standard System Resto re – select this option to restor e your system to its original factor y software and settin gs.
Configu ring the Sy stem 3-33 3. At the message informing you that the restoration proces s is finished, remove the Recov er y Boot diskette and th e P roduct Recovery CD from their drives . Press Enter to restart your system. The system restarts and in stalls the Windo ws operating system.
3-34 Configuring the System Tools The Tools menu includes a series of advanced tools to maintain the h ard drive and to ch eck the Product Recovery CD for potential errors. The T ools options ar e only for use by a n advanced PC user or qua lified technicia n.
Configu ring the Sy stem 3-35 How to L oad Smart Restor e To load Smart Restor e, click the Windows Start button, se lect Programs , Tools , and Restore .
3-36 Configuring the System Restoratio n Process Once you ha ve sele cted the pro gra ms or har d ware set ting s yo u want to restore, click OK to start the restoration process. Each applicati on or device y ou selected runs th rough its installat ion procedure.
Configu ring the Sy stem 3-37 2. Remove the access pan el from the bottom of the system un it (for panel removal, see “Installing a SO-DIMM Module” in Chapter 4). 3. Locate the jumper. Locating the password clear jumper A – Passw ord Clear Jumper 4.
3-38 Configuring the System Intel Processor Serial N umber Contr ol Utility The Intel Processo r Serial Num ber Control Utilit y is a Windows pro gram that enables or disables th e reading of the Pentium III processor serial numbe r b y soft ware .
Configu ring the Sy stem 3-39 Processor Seria l Number The Intel processor serial n u mber, a featu re of the Pentium III processor, is an identifier f or the processor. The process o r serial number is unique, and when us ed in conjunction with other identification methods, can be used to identify t he system or us er.
3-40 Configuring the System Can a website read my serial number without my knowledge? No, generally not. Websites cannot read serial nu mbers unless you allo w them to down load a program w hi ch can read the process or serial number. Almost all brow sers are configu red to warn users whenever they download ex ecutable software.
4 A d ding Expansion Dev ices ! Safety Precautions ! USB Devices ! PC Cards ! Memory Modules ! Hard Drive ! Parallel Printer ! External Monito r ! Serial Devices.
4-2 Adding Expansion Devices This chapter provides information for add ing a variety of industry- standard ex pansion devices to y our system . Included in the ch apter are procedures for installing: ! USB devices ! PC cards ! mem ory modul es ! hard dri ve ! printer ! external m onitor ! external s erial devices .
Adding Expansion Devices 4-3 ! Dissipate static electricity before h andling any system components (PC cards, m emory modules) by touching a grounded met al object, such as the unpain ted bottom plate on the sy stem unit. If poss ible, us e antistatic dev ices, such as wrist straps and floor m ats.
4-4 Adding Expansion Devices Connectin g USB devices is easy. You don’t need to turn off the sys te m to connect or discon nec t the devices. Simply match the connectors on the USB cable to the USB po rt on your system and the port on the USB device, then plug in t he cable.
Adding Expansion Devices 4-5 To insert a PC card, follow th ese steps. 1. Remove the PC card sl ot cover by press ing the eject button n ext to the slot. Pull the cover out of the slot and save it. 2. Align the PC card s o that the connector end poin ts to ward the PC card slot an d that th e printed label side is u p .
4-6 Adding Expansion Devices 4. Use the software ins tal led on your system to check PC card slot availability. In Win dows 98 or Win dow s 2000, a PC card icon s hould be in the control pan el or on the right side of th e task bar. The icon shows which slot con tains a PC card and wh ic h slot is empty.
Adding Expansion Devices 4-7 Memor y Mod ules Memory m odules are instal led into one or tw o SO-DIMM sockets on the system board. The sock ets are accessible f ro m the bottom of the system unit. The sockets support up to 512 MB of hi gh-speed m e mory.
4-8 Adding Expansion Devices For exam ple, with 128 MB of total syst em memory , 112 MB migh t be allocated for sys te m memory and 16 MB for v ideo m emory, with actual memory us age dependent on video usage.
Adding Expansion Devices 4-9 Positioning the LCD panel To prevent da mage to the LCD pane l, be sure to position the unit with the LC D panel f acing up. Positioning the system for memory upgrade A – Memory Module Panel B – Screw 6. Remove the screw securing the memor y module panel and remove the panel.
4-10 Adding Expansion Devices 7. Locate an empty modul e slot. If y ou need to remove one or bot h modules, see “Removing a SO-DIMM Module” in the next section . Before you in stall a SO-DIMM , reduce stat ic discharge by touching a metal part on t he syste m unit.
Adding Expansion Devices 4-1 1 Removing a SO-DIMM Module If you need to rem ove a SO-DIMM module, use the following steps. To prevent da mage to syste m compone nts and the memory modules, w ake a system i n sleep m ode, ex it W indows, p ower down the sy stem, and unplug the AC adapter pow er cord from the pow er source.
4-12 Adding Expansion Devices Hard Drive You can upgrade or replace y our hard drive without removing the syst em unit cover. The hard driv e is located on the right side of the system unit, under the hard driv e access panel.
Adding Expansion Devices 4-1 3 Releasing the hard drive access panel A – Latche s B – Hard Driv e Acce ss Panel 7. Grasp each end of t he interface cable conn ector ( not the cable) an d carefully un plug the cable connector from the hard drive. The connector seats t ightly on the ha rd drive and requires a fir m pull.
4-14 Adding Expansion Devices Installing a Hard Dri ve Install a hard drive as follows. 1. Remove the installed hard driv e (see “Removing a Hard Drive” earlier in this chapter). 2. Check that the interface cable is out of t he way and not behind th e syst em cove r.
Adding Expansion Devices 4-1 5 Parallel Printer You can connect a standard parallel pr inter to the system unit. To install the printer, you need the printer drivers an d a printer cable.
5 Solv ing System Proble ms ! Solutions to Common Pr oblems ! How to Clean the Mouse.
5-2 Solv ing Syst em Probl ems You may occasion al ly encounter a problem with the system. In m ost cases, the problem is one that you can solve yourself. The system has a built-in prog ra m that automatically checks its compon e nts when th e system i s powered on.
Solving Syst em Problem s 5- 3 ! Operating syste m not found error message displays when the syste m is starte d. If you left a CD in the CD-ROM drive, your system might not be able to boot. T ry rem o ving the C D a nd rebootin g. ! System does not boot and error m es sage displayed on screen.
5-4 Solv ing Syst em Probl ems ! Syste m shuts off instead o f go ing into sle ep mode. You press ed and hel d in the pow er/sleep butt on for more th an four seconds. For sl eep mode, press in t he button and imm ediately release. ! System does not shut off a fter pressing the po wer/sleep butto n.
Solving Syst em Problem s 5- 5 LCD Panel Problems Check the following problem s to see the possible cause and solution. ! Screen is dark or the display is hard to read. Adjust the LCD panel br ightness control settin g. (Note that the brightness setting returns to the syste m default setting on po wer down.
5-6 Solv ing Syst em Probl ems CD-ROM Drive Problem s Check the following problem s to see the possible cause and solution. ! The system does not see the drive. The drive desi gnat ion is wron g and shoul d be chang ed. The drive designat ion depends upon the st orage device conf i guration in your system.
Solving Syst em Problem s 5- 7 Speaker Problems Check the following problem s to see the possible cause and solution. ! Speak er volume i s too low. Adjust the volume control on the side of the syste m unit. If the volume is still too lo w, adjust the volume through the syste m software.
5-8 Solv ing Syst em Probl ems Typical mouse ball cover A – Mouse Ball Cover 3. Rotate the ball cover counterclockwise and remove the cover. 4. Turn the mouse ov er so that the cover and ball fall into y our palm. 5. Clean the mouse as follows. ! Use tap water, or tap water and a mild detergent, to clean the mouse ball .
6 Getting Serv ices and Support ! NECC We bsite ! NECC FTP Site ! Email/Fax Technica l Support Serv ice ! NECC Technical Support Se rvices.
6-2 Getting Services and Support If you tried correcting problems yourself or within your company and were not successful, you may want to tr y one or more of the following NECC 24-hou r services for answers to you r questions. (Some services require a conn ection to the Internet or a f ax machine.
Getting Servic es and Support 6-3 NECC FTP Site You can use the In ternet to access the NECC FTP (file transf er protocol) site to do wnload various files (video drivers, printer dr ivers, BIOS updates, and Setup Dis k files). The files are essentiall y the same files as on the N ECC website.
6-4 Getting Services and Support NECC Technical Su pport Services NECC also of fers direct tech nical support through its Technical Support Cent er. (NECC techni cal support is for U.S. an d Canadian customers only; international custo mers should check with their sales p rovider.
A Setting Up a Health y Work Environment ! Making Your Computer Work for You ! Arrange Your Equipmen t ! Adjust Your Chair ! Adjust Your Inpu t Devices ! Adjust Your Mo nitor ! Vary Y our Workday ! Pr.
A-2 Setting Up a Healthy Work Environment Prolonged or improper u se of a com puter workstatio n may pos e a risk of serious injury. T o reduce your risk of injury, set up and u se your comput er in the ma nner described in t his appendix .
Setting Up a Health y Wo rk Environ ment A-3 Arrange Your Equip ment Arrange y o ur equipment so that you can work in a n atural and relaxed position. Place items that you use frequently within easy reach.
A-4 Setting Up a Healthy Work Environment Adjust Your Cha ir Your chai r shoul d be adjustable an d stable. Vary you r posture throughout the day. Check the following: ! Keep y our body in a relaxed y et upright position. The back rest of your chair sh o uld support th e inward cu rve o f you r back.
Setting Up a Health y Wo rk Environ ment A-5 ! Extend your lo wer le gs sli ghtl y so t hat t he an gle be twee n your thig hs and low er legs is 90° or more. ! Place your feet flat on the floor. Only us e a footrest when attempts to adjust your ch air and workstation fail to keep you r feet flat.
A-6 Setting Up a Healthy Work Environment Adjust Your In put Devices Follow these points i n positioning your ke yboard and mouse. ! Position your keyboard directly in front of you. Avoid reaching when usin g your ke yboar d or mouse . ! If you use a m o use, position it at the sa me height as the keyboard and next to the keyb oar d.
Setting Up a Health y Wo rk Environ ment A-7 ! Type with your ha nds a nd wris ts flo ati ng ab ove t he ke ybo ard . Us e a wrist pad on l y t o rest your w rists between typing. Av oid resting your wrists on sharp edg es. ! Ty pe w ith y our w rists str aight .
A-8 Setting Up a Healthy Work Environment Adjust Your Monitor Correct placem ent and adjustment of the m o nitor can reduce ey e, shoulder, and neck fatigue. Check t he following when you position t he monitor. ! Adjust the monitor height so that the top o f the screen is at or slightly below eye level.
Setting Up a Health y Wo rk Environ ment A-9 ! Position the monitor at a 90° angle to windo ws and other light sources to minimize glare and reflections. Adjust the monitor tilt so that ceiling lights do not reflect on your screen. ! If refl ected light makes it hard for you to see your screen, use an anti- glare fi lter.
A-10 Sett ing Up a He althy Wo rk En vironment Vary Your Workday If you use yo ur c omp uter for p ro longe d pe rio ds, follo w thes e inst ruc tio ns. ! Vary y our tasks through out the day . ! Take frequen t short breaks that inv o lve walking, standing , and stretching.
Setting Up a Health y Wo rk Environ ment A-11 Note F or mo re in form at ion on wo rks tat io n set up , se e the A me ric an National Sta ndard for Hu man Factors Eng ineering of V isual Display Terminal W orkstation s. ANSI/HFS Stand ard No. 100-1988.
A-12 Sett ing Up a He althy Wo rk En vironment Checking Your Keyboard ! Is your keyb oar d angl ed so your wri sts ar e stra igh t whe n you t ype? ! Is you r keyboard directly in front of you? ! Do y.
Setting Up a Health y Wo rk Environ ment A-13 For more i nformati on on works tation s etup, see the American National Standard f o r Human F actors Engineering of Visual Display T erminal Works tations. AN SI/HFS Standard No. 100 -1988. The Human F actors Society, Inc.
B System Specifications ! System Board ! System Periphe rals ! Dimensions ! Power ! Operating Env i ronment ! Compliance.
B-2 System Sp ecificatio ns System Board The following sections give the specifications for major com pone nts on the sy stem board. System Processor ! Intel Pentium III 800-MHz or hi gher processor, .
System Sp ecific ations B-3 Calendar Clock Year/month/day/hour/minute/second/.01 second; maintained by battery Battery type — Lithium coin cell Input/Output (I/O) Features Industry-standard interfaces integrated o n system board: ! Univers al Serial Bus (US B) — two USB port s su pport tw o USB peripherals directly t o the sys te m.
B-4 System Sp ecificatio ns Sound Controller All systems come with audio in te grated on the system board. The au dio is based on th e Intel 82801 (ICH) chi p and Yama ha YMF752 chip. F eatures include: ! Compatible with Sound B laster Pro ™ , So und B laste r ™ 2.
System Sp ecific ations B-5 System Peripherals The following sections g i ve the specifications f or system peripherals. LCD Panel Systems come with a 15- i nch, high-resolution acti ve matrix twisted nematic (TN) TFT Super Video Graph ics Array (S VGA) color display.
B-6 System Sp ecificatio ns External Monitor The follow i ng resolut ions are supporte d on an opti onal ex ternal m onitor: ! 320 x 200 (2 56/High color), v ertical f requency depends on software ! 3.
System Sp ecific ations B-7 Diskette Drive Syst ems come w ith a Mobile D iskett e Drive, 3 1/2- inch, 1.44 MB ! Capacity — High den sit y mode: Unform atted: 2.00/1.00 M B Formatt ed: 1440 KB (512 B 18 Sec) 720 KB (256B 18 Sec) — Normal den sity mode: Unform atted: 1.
B-8 System Sp ecificatio ns CD-ROM Drive Syst ems come wi t h a Mobile A T API 24X MAX Sl im CD-R OM drive. ! Disc rot ation speed — 5136 rpm ! Data tran sfer rate (sustai ned) — 1548 KB/s econd to 3600 KB/ second ! Data transfer rate (burst) — 16.
System Sp ecific ations B-9 Dimensions System Base chas sis — 10.75 in ches (274.1mm) wi de x 7.5 inch e s (192mm ) deep x 2.7 5 inc hes (7 0 mm) hi gh Total heig ht (with L CD panel) — 15.6 in ches (395mm) Weigh t — approximat ely 12 lb. Keyboard Height — 1.
B-10 System Sp ecificat ions Compliance Domes tic: FCC CFR 47 Part 15, Su bpart B UL 1950 3rd edition Cana dian: C-UL C22.2 No.950-95 ICES- 003 Issu e 2, Revision 1 Year 2000: YMA RK 2000 NEC Y2KTEST.
Index-1 A Acrobat reader, 1- 16 AGP gr aphi cs, 1-15 Anti-theft bracket, 1- 8 features, 1- 8 Audio connectors , 1-8 features, 1- 8 subsy stem, 1-15 B Battery CMOS, 3-4 problem s, 5-3 BIOS Advanced Men.
Index-2 Dime nsio ns key board, B-9 sys tem , B-9 Disk error problem s, 5-2, 5- 4 Diskette FLASH, 3-28 Diskette drive descripti on, 1-5 problem s, 5-4 specifications, B-7 Display modes, 1- 5, B-5 Driv.
Index-3 cleaning, 2- 6 problem s, 5-5 setu p, 2-2 specifications, B-6 L Lamps and con trols hard drive lamp, 1-4 power/s leep butt on, 1-4 po wer/sleep lamp s, 1-4 LAN connect or, 1-11, 2-2 features, .
Index-4 PC card inserting, 4-4 re moving, 4-6 slot features , 1-9 slot specifications, B- 8 PC99 com pliance, 1-15 Perform a nce problems , 5-3 Pow er mana geme nt, 1-15 problem s, 5-2 setu p, 2-2 sle.
Index-5 Setup Utility BIOS, 3-4 legend ba r, 3 -5 Main Menu, 3-4 startu p, 3-4 usin g, 3-4 Shippi ng, 2-7 preparations, 2- 7 safety precau tions, 2-7 Shutdo wn power of f, 2-3 Window s 98 or Window s .
Index-6 overvi ew, 1-15 PC card slot s, 1-9 printe r port, 1-11 PS/2 key board port, 1-11 PS/2 m o use port, 1-11 rear panel, 1- 10 righ t side, 1-7 security, 1- 17 serial port , 1-11 USB ports , 1-8 .
Regulatory St atemen ts 1 Regulato ry Statements The following regulator y statements include the Federal Commun ications Commission (FCC) Radio Frequ ency Interference Statement, compliance statemen ts for Canada an d Europe, battery disposal and replacem ent information, and the Declaratio n of Conformity.
2 Regulato ry Stat ements Canadian Department of Communications Complianc e Statement This Class B digital apparatus meets all require ments of the Canadia n Interference-Causing Equipment Regulations (purs uant to ICES-003 Issue 2, Revisio n 1) .
Regulatory St atemen ts 3 Battery Disposa l The CMOS batter y is made of lithium. Contact your lo cal waste mana geme nt o ffic ial s for othe r in for matio n re gard ing t he e nvir on menta ll y sound collection, recycling, and dispos al of the batteries.
.
NEC Computers Inc. DECLARATIO N OF CONFORMI TY We, the Responsible Party NEC Computers Inc. 15 Business Park Way Sacramento, CA 95828 declare that the product NEC PowerMate 2000 is in compliance with FCC CFR47 part 15 for Class B digital devices.
デバイスNEC 2000の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
NEC 2000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNEC 2000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。NEC 2000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。NEC 2000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
NEC 2000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNEC 2000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、NEC 2000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNEC 2000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。