NECメーカーDS1000/2000の使用説明書/サービス説明書
ページ先へ移動 of 38
Release 02.03.00 Feature Handbook Supplement 80000MFS01 October 2001 Printed in U.S.A..
Nothing contained in this manual shall be deemed to be, and this manual does not consti- tute, a warranty of, or representation with respect to, any of the equipment covered. This manual is subject to change without notice and NEC America, Inc. has no obligation to pro- vide any updates or corrections to this manual.
Caller ID Logging .............................................................1 Caller ID Logging at your 22-Button or 34-Button Display T elephone . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Caller ID Logging at your Super Display T elephone .
ii.
If your system has Caller ID enabled, Caller ID logging stores in a log your caller ’ s number and optional name for each outside call that rings the system. Y ou can view this log on your telephone display , allowing you to easily review and redial your calls.
– T otal = the total number of Caller ID records in your log. – New = the number of new calls since you last reviewed your log. 2. While this display is on screen, you can: – Press ALL to review all your Caller ID records. – Press UNAN to review the records just for calls that rang you phone but were unanswered in the system.
– The outside line number (or name – if programmed) the call came in on. – The extension that answered the call, or if the call was unanswered. 5. Use and to scroll through the Caller ID records that are logged at your phone. 6. Press to toggle between Page 1 and Page 2 .
Caller ID Logging at your Super Display T elephone T o review your Caller ID log: 1. While your phone is idle, press CALLs nn (where nn is the number of Caller ID records currently logged at your phone).
2. While this display is on screen, you can: – Press VIEW ALL to review all your Caller ID records. – Press VIEW UNANS to review the records just for calls that rang you phone but were unanswered in the system. – Press DELETE ALL to delete all Caller ID records logged at your phone.
4. Use and to scroll through the Caller ID records that are logged at your phone. 5. When a Caller ID record is displayed, you can: – Press CALLBACK to call the person back. – Press DELETE to delete the displayed record. – Press STORE BIN to store the number in a Personal Speed Dial bin.
Use Distinctive Ringing to cus- tomize the way your telephone rings. If you are in a large work area with other co-workers, set up Distinctive Ringing so you’ll always know when calls are for you. In addition, Distinctive Ringing helps you more easily differen- tiate the types of calls ringing your phone.
Extension Override instead of Distinctive Ring Configuration if you just want to change the way your outside calls ring. Or , you can first set up Distinctive Ring Configuration and then use Extension Override to further customize ringing. ( Note that your Extension Override selections always override your Distinctive Ring Configuration settings .
1. While your phone is idle, press PGM . Y ou see: 2. Press RING . Y ou see: 3. Press CNFG . Y ou see: If you press MORE , you see: If you press MORE again, you see: From these choices: – Press ICM to change the sound of your Intercom ringing. (T o make your Intercom calls ring, use the #V A User- Programmable Feature.
A, B and C ringing when setting up Extension Override (page 13) and Key Ring Override (page 17). – Press DFL T to select one of the 3 default ringing setups (1-3) and cancel your custom settings. 4. When you select a ringing option in the previous step, your phone “plays” the current ring setting for that option and displays your choice.
T o customize ringing at your super display telephone: – Y our extension’ s Class of Service may block you from doing this. Ask your Communications Manager . 1. While your phone is idle, press PROGRAM . Y ou see: 2. Press RING . Y ou see: 3. Press CONFIG .
From the displayed choices: – Press INTERCOM to change the sound of your Intercom ringing. (T o make your Intercom calls ring, use the #V A User-Programmable Feature.) – Press RING GROUP to change your Ring Group ringing. – Press RECALL to change the sound of your Hold, Park, and T ransfer Recall ringing.
For the option you choose to change: – Press RING TONE to change the ringing pitch. If you want to do this, go to step 5 after pressing RING TONE . – Press CADENCE to change the ringing pattern. If you want to do this, go to step 5 after pressing CADENCE .
1. While your phone is idle, press PGM . Y ou see: 2. Press RING . Y ou see: 3. T o change the ringing for your outside calls (Extension Override), press ASGN . Y ou see: 4. Select the outside call ringing mode you want to change. – Press DA Y for day mode calls.
T o customize ringing for outside calls from your super display telephone: – Y our extension’ s Class of Service may block you from doing this. Ask your Communications Manager . 1. While your phone is idle, press PROGRAM . Y ou see: 2. Press RING .
3. T o change the ringing for your outside calls (Extension Override), press ASSIGN . Y ou see: 4. Select the outside call ringing mode you want to change. – Press DA Y RING for day mode calls. – Press NIGHT RING for night mode calls. – Press DELA Y RING for delay ring calls.
Key Ring Override ☎ Set up Unique Ringing for your Line, Call Coverage, and Group Call Pickup Keys. T o set up Key Ring Override for your 22-button or 34-but- ton display telephone: – Y our extension’ s Class of Service may block you from doing this.
5. Press a key of the type you selected above. Y ou see (example for Line Key 01 shown below): – Dial to select Ring T ype A. – Dial to select Ring T ype B. – Dial to select Ring T ype C. – Dial select Standard (i.e., normal ringing for this type of call).
2. Press RING . Y ou see: 3. T o set up Key Ring Override, press KEY . Y ou see: 4. Select the type of key you want to program. – The ring type you select in the next step will be assigned to the key you press in this step. – After you make your selection, the keys of the chosen type will illuminate.
5. Press a key of the type you selected above. Y ou see (example for Line Key 01 shown below): – Dial to select Ring T ype A. – Dial to select Ring T ype B. – Dial to select Ring T ype C. – Dial select Standard (i.e., normal ringing for this type of call).
Administration ☎ Selecting and Storing a Default Ring Tone Set T o select a new default Ring T one Set for your 22-button or 34-button display telephone: 1. While your phone is idle, press PGM . Y ou see: 2. Press RING . Y ou see: 3. Press CNFG . Y ou see: 4.
7. When you see: – Dial 9 (for yes) or confirm your selection, or – Dial 6 (for no) to exit without making a selection. 8. Press to exit. T o select a new default Ring T one Set for your super dis- play telephone: 1. While your phone is idle, press PROGRAM .
2. Press RING . Y ou see: 3. Press CONFIG . Y ou see: 3. Press DEF AUL T . Y ou see: 4. Select the Ring T one Set you want to use (1-3). – By default, your extension initially uses Ring Set 1.
5. When you see: – Dial 9 (for yes) or confirm your selection, or – Dial 6 (for no) to exit without making a selection. 7. Press to exit. T o store your customized ringing as a default Ring T one Set from your Super Display telephone: – This option is only available at Super Display telephones.
2. Press ADMIN . Y ou see: 3. Enter the System Administrator ( 0000 ), System Administrator 2 ( 9999 ), or Installer ( 372000 ) password. Y ou see: 4. Enter the number of the default Ring Set (1-3) to which you want to save your phone’ s configuration.
5. When you see: – Dial 9 (for yes) to confirm your selection, or – Dial 6 (for no) to exit without making a selection. 6. Press to exit. Distinctive Ringing 26.
Y our telephone display can show the type of call recalling, as well as which co-worker initially Parked, T ransferred, or placed the call on Hold. Hold Recall Following are the displays you see at your phone when a call placed on Hold is recalling. In the first example, the call was placed on Hold at extension 301 (which does not have a name).
T ransfer Recall Following are the displays you see at your phone when a transferred call is recalling. In the first example, the call was transferred by extension 301 (which does not have a name). In the second example, the call was transferred by extension 300 (which has the name A TTENDANT) .
Use Handsfree T ransfer to send an outside call to a co-worker ’ s speakerphone. This allows your co-worker to converse with the transferred caller just by speaking toward their phone — without lifting the handset. T o T ransfer a call to a co-worker’s speakerphone: 1.
Y ou can easily adjust the volume of your phone and the contrast of the display . The volume and dis- play settings you make are “remembered” by the system in the event of a power down or system reset.
4. Press the key for the type of volume you want to adjust: – RING = Ringing – OFHK = Off-hook ringing – P AGE = Page announcements (incoming) Y ou see (ringing shown): 5. Press or to adjust the selected volume. – The number to the right of the display indicates the current setting (1-7).
3. Press the key for the type of volume you want to adjust: – RING = Ringing – OFF-HK RING = Off-hook ringing – P AGE = Page announcements (incoming) Y ou see (ringing shown): 4. Press or to adjust the selected volume. – The number to the right of the display indicates the current setting (1-7).
Y our Super Display T elephone 123 456 789 0 ABC DEF MW ICM FLASH DND DIAL MIC LND SPKR CONF HOLD GHI JKL MNO PQRS TUV OPER VOL WXYZ 80000 - 71 CHECK CLEAR LINE 1 LINE 2 LINE 3 LINE 4 LINE 5 LINE 6 LINE 7 LINE 8 Keys 13-24 are undefined for non-attendants in DS2000.
NEC America Inc., Corporate Networks Group 4 Forest Parkway , Shelton, CT 06484 TEL: 203-926-5400 F AX: 203-929-0535 cng.nec.com.
デバイスNEC DS1000/2000の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
NEC DS1000/2000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNEC DS1000/2000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。NEC DS1000/2000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。NEC DS1000/2000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
NEC DS1000/2000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNEC DS1000/2000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、NEC DS1000/2000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNEC DS1000/2000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
