NECメーカーP551AVTの使用説明書/サービス説明書
ページ先へ移動 of 43
User ’ s Manual MultiSync P401 MultiSync P461 MultiSync P521 MultiSync P551.
Index Declaration of conformity ...................................................................................................... ....................... English-1 Important Information ............................................................
English-1 English DECLARA TION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
English-2 Important Information TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT T O RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT ACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSERTED.
English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MUL TI-FUNCTION MONIT OR: • DO NOT OPEN THE MONITOR . There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
English-4 Contents Power Cord* 1 Setup Manual Clamp x 3 Y our new MultiSync monitor box* should contain the following: • LCD monitor • Power cord* 1 • Video Signal Cable • Wireless Remote Cont.
English-5 English This de vice cannot be used or installed without the T abletop Stand or other mounting accessor y f or suppor t. F or proper installation it is strongly recommended to use a trained, NEC authorized service person.
English-6 Attaching Mounting Accessories The display is designed for use with the VESA mounting system. 1. Attach Mounting Accessories Be careful to avoid tipping monitor when attaching accessories.
English-7 English EXIT button Activates the OSD menu when the OSD menu is turned-off. Acts as EXIT button within the OSD to move to previous menu. Remote control sensor and Power Indicator Receives the signal from the remote control (when using the wireless remote control).
English-8 T erminal Panel Out In RGB H V RGB/HV RGB H V DVD/HD2 Pr Y Pb VIDEO2 VIDEO VIDEO IN connector (BNC and RCA) T o input a composite video signal. BNC and RCA connectors are not available at the same time (Use only one input). VIDEO OUT connector (BNC) T o output the composite video signal from the VIDEO IN connector .
English-9 English Kensington Lock For security and theft prevention. EXTERNAL SPEAKER TERMINAL T o output the audio signal from AUDIO 1, 2, 3, DPORT , HDMI and TV jack. Red terminal is plus (+). Black terminal is minus (-). Note: This speaker terminal is for 15W + 15W (8 ohm) speaker .
English-10 POWER button Switches the power on/standby . INPUT button Selects input signal. DVI: DVI DISPLA YPOR T : DPORT VGA: VGA RGB/HV : RGB/HV HDMI: HDMI DVD/HD: DVD/HD1, DVD/HD2, SCART VIDEO: VID.
English-11 English Operating Range for the Remote Control Point the top of the remote control toward the LCD monitor ’s remote sensor during button operation. Use the remote control within a distance of about 7 m (23 ft.) from remote control sensor or at a horizontal and vertical angle of within 30° within a distance of about 3.
English-12 1. Determine the installation location CAUTION: Installing your LCD display must be done by a qualified technician. Contact your dealer for more information. CAUTION: MOVING OR INST ALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE (P401/P461), BY FOUR OR MORE PEOPLE (P521/P551).
English-13 English 6. Switch on the power of all the attached external equipment When connected with a computer , switch on the power of the computer first. 7. Operate the attached external equipment Display the signal from the desired input source. 8.
English-14 Connections NOTE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in a loss of the monitor image. NOTE: Use an audio cable without a built-in resistor . Using an audio cable with a built-in resistor turns down the sound.
English-15 English Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer ’s screen image. Some video cards with a pixel clock over 162MHz may not display an image correctly . Y our LCD monitor displays proper image by adjusting the factory preset timing signal automatically .
English-16 Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red or amber while powered off. NOTE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button on the front of the LCD.
English-17 English NORMAL: Displays the aspect ratio the same as it is sent from the source. FULL: Fills entire screen. WIDE: Expands a 16:9 letter box signal to fill entire screen. ZOOM (DYNAMIC): Expands a 4:3 pictures to fill the entire screen with non-linearity .
English-18 BRIGHTNESS level set for the monitor to use when ambient lighting level is low . BRIGHTNESS level set for the monitor to use when ambient lighting level is high. BRIGHTNESS range IN DARK: BRIGHTNESS level set for the monitor to use when ambient lighting level is low .
English-19 English OSD (On-Screen-Display) Controls Press UP or DOWN button to select sub-menu. Press SET . Press UP or DOWN, PLUS or MINUS to select the function or setting to be adjusted. Press MENU or EXIT . Remote Control Press UP or DOWN button to select.
English-20 Setting Default BRIGHTNESS Adjusts the overall image and background brightness. Press + or - to adjust. 70 Note: When AMBIENT1 or AMBIENT2 is selected in picture mode, this function cannot be changed. CONTRAST Adjusts the image brightness in relationship to the background.
English-21 English H RESOLUTION Adjusts the horizontal size of the image. - VGA, RGB/HV inputs only V RESOLUTION Adjusts the vertical size of the image.
English-22 TIME Configures the time for the real-time clock. - DA YLIGHT SA VING Configures daylight savings on or off. OFF SCHEDULE RESET Resets the following settings within the SCHEDULE menu back to factory setting: - OFF TIMER, SCHEDULE SETTINGS.
English-23 English INFORMA TION OSD Selects whether the information OSD is displayed or not. The information OSD will be ON, 3 Sec. displayed when the input signal or source changes. The information OSD will also give a warning when there is no-signal or the signal is out-of range.
English-24 LAN SETTING When you use this function, EXTERNAL CONTROL should be “LAN”. NOTE: When changing the LAN SETTING, turn the monitor off and then back on. After turning on the monitor , you need to wait several seconds until the LAN SETTING is applied.
English-25 English INPUT DETECT Selects the method of input detection the monitor uses when more than two input devices FIRST DETECT All inputs except for TV* are connected.
English-26 COLOR SYSTEM The selected Color System depends on the video format of the input signal. AUTO VIDEO1, VIDEO2, S-VIDEO inputs only AUTO Automatically chooses Color System setting based on input signal. NTSC PA L SECAM 4.43 NTSC P AL-60 SCAN MODE Some video formats may require different scanning modes in order to best display the image.
English-27 English NOTE 1: CREA TING A SCHEDULE The schedule function allows the display to be set to power on and off at dif ferent times. Up to seven different schedules can be programmed. T o program the schedule: 1. Enter the SCHEDULE menu. Highlight SCHEDULE SETTINGS using the up and down buttons.
English-28 REMOTE CONTROL ID FUNCTION REMOTE CONTROL ID The remote control can be used to control up to 100 individual MultiSync monitors using what is called the REMOTE CONTROL ID mode. The REMOTE CONTROL ID mode works in conjunction with the Monitor ID, allowing control of up to 100 individual MultiSync monitors.
English-29 English 3. Press the “DISPLA Y” button on the remote control while aiming at the “PRIMAR Y” monitor . The Information OSD will be shown at top left side of the screen. Monitor ID: Displays the ID number of the current monitor within the daisy chain.
English-30 This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. NOTE: When you use this function, EXTERNAL CONTROL should be “RS-232C” (See page 23).
English-31 English Connecting to a Network Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings by using an HTTP server function. NOTE: When you use this function, EXTERNAL CONTROL should be “LAN” (See page 23).
English-32 Preparation Before Use Connect the monitor to a commercially available LAN cable before engaging in browser operations. Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the setting method.
English-33 English Alert Mail Setting http://<the Monitor ’s IP address>/lanconfig.html This option notifies your computer of an error message via e-mail when using wired LAN. An error message notification will be sent when an error occurs in the monitor .
English-34 Reduced Footprint: Provides the ideal solution for environments with superior image quality . Color Control Systems: Allow you to adjust the colors on your screen and customize the color accuracy of your monitor to a variety of standards. OmniColor: Combines Six-axis color control and the sRGB standard.
English-35 English No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position.
English-36 Specifications - P401 Product Specifications LCD Module 40" /1016 mm diagonal Pixel Pitch: 0.461 mm Resolution: 1920 x 1080 Color: Over 16 million colors (depending on video card used) Brightness: 650 cd/m 2 (Max.
English-37 English Specifications - P461 Product Specifications LCD Module 46" /1 168 mm diagonal Pixel Pitch: 0.530 mm Resolution: 1920 x 1080 Color: Over 16 million colors (depending on video card used) Brightness: 650 cd/m 2 (Max.), 500 cd/m 2 (Typ.
English-38 Specifications - P521 Product Specifications LCD Module 52" /1321 mm diagonal Pixel Pitch: 0.6 mm Resolution: 1920 x 1080 Color: Over 16 million colors (depending on video card used) Brightness: 700 cd/m 2 (Max.
English-39 English Specifications - P551 Product Specifications LCD Module 54.6"/1388 mm diagonal Pixel Pitch: 0.63 mm Resolution: 1920 x 1080 Color: Over 16 million colors (depending on video card used) Brightness: 700 cd/m 2 (Max.), 500 cd/m 2 (Typ.
English-40 1) RS-232C input/output Pin No Name 1 connected to 7&8 2 RXD 3 TXD 4 connected to 6 5 GND 6 connected to 4 7 connected to 1&8 8 connected to 1&7 9N C 1 6 5 9 D-SUB 9P This LCD monitor uses RXD, TXD and GND lines for RS-232C control.
English-41 English NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment.
デバイスNEC P551AVTの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
NEC P551AVTをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNEC P551AVTの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。NEC P551AVTの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。NEC P551AVTで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
NEC P551AVTを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNEC P551AVTの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、NEC P551AVTに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNEC P551AVTデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。