NECメーカーPF32W503の使用説明書/サービス説明書
ページ先へ移動 of 18
INSTRUCTION MANUAL Colour T elevision PF32W503 1 T able of contents Safeguards 2 INTRODUCTION Features 3 Installation 3 To connect the aerial 4 To prepare the remote control 4 Identification of contro.
2 SAFEGUARDS To operate your receiver at the peak performance, please read this Instruction Manual carefully and retain it for the future reference. M Water and Moisture : Never install the set in the following places : in the bathroom, in a wet basement(Dripping or splashing water).
4 T o connect the aerial T o prepare the remote control INST ALLA TION Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and positioning of the aerial will depend upon your particular area.
6 BACK A/V OUTPUT TERMINAL This always provides with TV signal output of the selected channel. Video 1 input terminals or DVD input terminals TOP VIDEO 2(SCART JACK) input / output terminal (SCART does not supports S-VIDEO) A/V OUT OF SCART TERMINAL will provide with TV signal output of the selected channel.
TURNING THE POWER ON / OFF The following describes how to turn the TV on / off using the main switch and the remote control. < To turn the power on / off > 1. Press the main power switch. The power indicator lit up red or amber. In displays the standby mode that the power indicator lit up red.
10 EDIT 1. Press the menu button to select INSTALL. 2. Press the C / B buttons and then INSTALL SYSTEM. 3 . Select EDIT with the PR y / x buttons and press the C / B buttons to start EDIT. 4. DELETE PROGRAM POSITION DATA. Position the blue-line to the program to delete with the PR y / x buttons and the DELETE button.
12 TO SELECT THE PANORAMA OR ZOOM 1~ZOOM 4 SCREEN 1. By pressing the WIDE / ZOOM button in remote control, the following seven modes change cyclically. 2 . Or press the MENU button to FEATURES. 3. And then to be displayed on the right appearance. Select the ZOOM with the PR y / x buttons.
14 TO SELECT THE SOUND MODE 1. Press the SELECTABLE SOUND ( ) button to select the desired sound quality. NORMAL, FAVOURITE, MUSIC, SPEECH can be selected cyclically. 2. Or press the MENU button to select the SOUND and then to be displayed on the right appearance.
16 STEREO PROGRAMS Press the STEREO / BILINGUAL SELECT ( )button to select to nicam- stereo / mono mode. BILINGUAL PROGRAMS 1. When a bilingual program is received DUAL 1, DUAL 2 appears. 2. Press the STEREO / BILINGUAL SELECT button to be heard. The sound differs according to transmission system : DUAL 1 and DUAL 2 appear cyclically on the screen.
18 TO TURN ON THE TV AUTOMATICALLY(WAKE TIME) With the CLOCK, the WAKE TIME, the WAKE PR. Preset, the TV will automatically turn on to a preset program number at a reset time. Set the timer ON. Select the WAKE TIME with PR y / x buttons. Then, press direct key(0~9) to set the wake up time.
20 TO SELECT THE SCREEN COLOR When no signal is being received, the TV will automatically turn blue or red at the time SCREEN BLUE or SCREEN RED on. 1. Press the MENU button to select the FEATURES and then to be displayed on the right appearance. Press PR y / x buttons to select the SCREEN.
22 W A TCHING PICTURE IN PICTURE The unit is capable of displaying two picture with the small sub picture simultaneously. This is called the Picture-In-Picture function. A TV picture or a picture from external source equipment such as a VTR can be displayed as another picture.
24 TO SWITCH THE MAIN AND SUB-PICTURE OF THE PIP Press the SWAP button when a picture-in-picture is displayed. The main picture(the large picture) and sub-picture(the small picture) are switched. Press the SWAP button again to switch again. TO FREEZE THE SUB-PICTURE Press the STILL button when a sub-picture is displayed.
26 CONNECTING VIDEO L When connecting the VIDEO to the back of the TV 1. Prepare the connective plug for picture / sound. 2. Connect the VIDEO picture output terminal with the TV picture input terminal. 3. Connect the VIDEO sound output terminal with the TV sound input terminal.
28 CONNECTING WITH S PICTURE VIDEO VIDEO AUDIO R L S-VIDEO SOUND OUTPUT S-PICTURE OUTPUT HI-FI STEREO VIDEO L Side Connector M To watch TV in clear field by inputting S picture. When repeating high-quality field VIDEO, you can enjoy clear and sharp picture by connecting it with TV S-VHS terminal.
30 CONNECTING WITH AUDIO SET M When listening to sound in powerful AUDIO, while watching the picture on TV. M Connect external input terminal of AUDIO to right & left sound output of TV signal. RIGHT LEFT M When connecting other equipment, please ensure you turn the main switch OFF to prevent any damage to the equipment.
32 TO SELECT THE TEXT MODE First, turn on your TV SET and choose your TV program. Then press the TEXT( )button to switch the receiver to Teletext mode. To select any other page, simply press the three of the PAGE SELECTOR buttons or PR y / x buttons. The page number requested is displayed on the upper left hand side of the screen.
34 SPECIFICA TION TV Standard Color system Sound system Rated voltage Sound Output Power Channel Coverage T uning System Program No. Indication Program Selection Aux. T erminal Power consumption PA L / SECAM, NTSC 3.58 / 4.43(A V) B / G, D / K, I, H 1 10-240V~, 50 / 60Hz 8W X 8W HYPER BAND CA TV VHF L : E2(48.
デバイスNEC PF32W503の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
NEC PF32W503をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNEC PF32W503の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。NEC PF32W503の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。NEC PF32W503で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
NEC PF32W503を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNEC PF32W503の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、NEC PF32W503に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNEC PF32W503デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。