NECメーカーSX10000の使用説明書/サービス説明書
ページ先へ移動 of 56
SX10000 High Light Output Pr ojection System • Gr oßbildschirm Projektions-System User ’ s Manual • Bedienungshandbuch.
SX10000 High Light Output Pr ojection System User’ s Manual.
E – ii CAUTION: T o turn off the main power , be sure to remov e the plug from power outlet. The pow er outlet socket should be installed as near to the equipment as possible , and should be easily accessible . 3. GSGV Acoustic Noise Information Ordinance: The sound pressure le vel is less than 70 dB(A) according to ISO 3744 or ISO 7779.
E – iii Fire and Shock Pr ecautions 1. Ensure that there is sufficient ventilation and that v ents are unob- structed to prev ent potentially dangerous concentrations of ozone and the build-up of heat inside y our projector . Allow at least 8 inches (20cm) of space between y our projector and a wall.
E – iv Précautions contre l'incendie ou la décharge 1. S'assurer qu'il y ait une ventilation suffisante et que les ouv er tures ne soient pas obstru é es afin d' é viter des concentrations potentiellement dangereuses d'ozone et l'accumulation de chaleur à l'int é rieur du projecteur.
E – v LIMIT A TION OF IMPLIED W ARRANTIES All implied warranties , including warranties of merchantability and fit- ness for a particular pur pose, are limited in duration to the length of this warranty . EXCLUSION OF DAMAGES NECTECH ’ s liability f or any def ective product is limited to the repair or replacement of the product at our option.
E – vi T ABLE OF CONTENTS Video Adj ........................................................................ E-33 Noise Reduction ...................................................... E-33 Color Matrix ..............................................
E – 1 Getting Started The fastest w ay to get started is to take y our time and do e verything right the first time. T aking a few minutes no w to re view the manual ma y sav e you hours later on. At the beginning of each section of the manual you'll find an ov erview .
E – 2 1. Part Names and Functions PC Card Slot * T o tur n on the main power to the projector , press the switch to the ON position (I) and the POWER indicator on the rear panel will turn or- ange in color . Press to the OFF position (0) to turn the main power off .
E – 3 LENS SHIFT ZOOM MENU SELECT - + ENTER ON INDICATOR POWER STATUS ON/OFF OFF CANCEL FOCUS 11 10 9 8 7 5 4 2 1 3 6 1. Power Button Press to turn the projector on when the projector is in the standby con- dition (Main P ower s witch m ust be on and the POWER indicator lit or- ange).
E – 4 OUTPUT INPUT3 OPTION REMOTE1 RGB OUT IN REMOTE2 REMOTE3 INPUT7 INPUT8 INPUT5 INPUT6 OUT LED ON OFF IN IN Y C S-VIDEO1 S-VIDEO2 VIDEO1 VIDEO2 R/C r B/C b Cb H/H V V V H/H V B/C b G/Y G/Y R / Cr.
E – 5 1. INPUT 3 RGB Connector (Mini D-Sub 15 pin) Connect your PC or other analog RGB equipment such as a high-defi- nition document camera. This connector accepts RGB signals only . Not compatible with component signals . 2. Option Connector (Mini D-Sub 9 pin) For system e xpansion such as PC-control.
E – 6 ENTER CANCEL UNDO AUTO HELP ON TEST ABC 1 DEF 2 GHI 3 JKL 4 MNO 5 PQR 6 STU 7 VWX 8 0 YZ / 9 POWER INPUT OFF INFO PIXEL SOUND OSD MAGNIFY/ CTL FOCUS + - ZOOM + MENU/ ADDRESS IMAGE/ PROJECTOR POSI/ LENS KEY ST ./ ON OFF R E-LIST/ PICTURE ADJUST WHITE BAL.
E – 7 19 MUTE OSD Press to tur n off the on-screen displa y . Press again to restore the on- screen displa y . NOTE: Y ou can also turn off the on-screen display by pressing and holding CTL and then pressing MUTE OSD; doing this again restores it. In this case any adjustment will still change the projector's memory settings.
E – 8 2. INST ALLA TION Formulas: Screen Width H (5:4) (m) = Screen Height V x 5/4 x 0.0254 Screen Height V (5:4) (m) = Screen Width H x 4/5 x 0.0254 Screen Diagonal (5:4) (m) = Screen Height V x 6.
E – 9 Lens Shift Adjustable Range Lens Shift Adjustable Range f or Desktop and Ceiling Mount Application The diagram belo w shows the location of the image position in the lens. The lens can be shifted within the shaded area as shown using the normal projection position as a star ting point.
E – 10 Selecting A Location The fur ther your projector is from the screen or wall, the larger the im- age. The minim um size the image can be projected is 80" (2 m) mea- sured diagonally . The largest the image can be is 500" (12.7 m). W ARNING • Only use your projector on a solid, le v el surface .
E – 11 Connecting the Power Cable and T ur ning on the Projector Before y ou turn on your projector , ensure that the computer or video source is turned on and that your lens cap is remov ed. 1. Connect the supplied power cable to the projector . Plug the supplied power cable into the A C outlet.
E – 12 About Startup Screen (Menu Language Select screen) When you first turn on the projector , you will get the Startup screen. This screen gives y ou the oppor tunity to select one of the se ven men u languages: English, German, F rench, Italian, Spanish,Swedish and Japanese .
E – 13 Set up the projector 1. T urn on the pr ojector 2. Select your type of pr ojection: Desktop fr ont, ceiling r ear , desktop r ear , and ceiling front. 3. Display the test pattern by pr essing the TEST b utton on the re- mote contr ol or using the menu.
E – 14 Keystone Keystone distortion Normal Ke ystone is the distortion of a projected image that usually creates a wider top than bottom. Aiming a projector upw ard on a wall rather than straight at a wall creates this distortion. Use the 䊴 or 䊳 b uttons on the slide bar to correct this ke ystone (trapezoidal) distortion.
E – 15 3-1-6-3. Remove the PC card from the sla ve projector . NOTE: If you select the RGB1 input on the master projector , you must select the same input on the slave projector .
E – 16 Projector Orientation An image can be projected from in front or behind a screen, and the projector can be installed on the ceiling*. Ceiling Front Pr ojection Use [Projector Options] → [Setup] → [P age 1] → [Orientation] to select "Ceiling F ront".
E – 17 When used in standalone operation Connecting Y our PC Or Macintosh Computer Connecting your PC or Macintosh computer to SX10000 Projector will enable you to project y our computer's screen image f or an impressiv e presentation. T o connect to a PC or Macintosh : 1.
E – 18 OUTPUT INPUT3 OPTION REMOTE1 RGB OUT IN REMOTE2 REMOTE3 INPUT7 INPUT8 INPUT5 INPUT6 OUT LED ON OFF IN IN Y C S-VIDEO1 S-VIDEO2 VIDEO1 VIDEO2 R/C r B/C b Cb H/H V V V H/H V B/C b G/Y G/Y R / C.
E – 19 When Used with T wo or More Switchers (100 Inputs) Up to 100 inputs can be accepted using the NEC ISS-6020 Switcher . How to make connections: 1. Connect the REMOTE 1 terminal of the master Switcher to the RE- MO TE 1 of the projector using the optional control cable (15p-15p/ CTL-6010).
E – 20 Set the DIP switch (S8601) of the Switcher as follows: The Projector Slot 1 of the Master Slot 2 of the Master Slot 3 of the Master Slot 4 of the Master Slot 5 of the Master Slot 6 of the Mas.
E – 21 REMOTE 1 Connector Pin Configuration of Optional CTL-6010 Cable REMOTE 1 connector of the Switcher mini D- sub 15 pin (female) REMOTE 1 connector of the Projector mini D-sub 15 pin (female) Shield (frame ground) Pins without a number are open.
E – 22 When used in stand alone operation. Pin No. 14 5 10 4,8,12,11 SHORT/OPEN SHORT OPEN SHORT OPEN SHORT OPEN FUNCTION External control mode ON External control mode OFF POWER ON POWER OFF PICTUR.
E – 23 REMOTE2 INPUT7 S-VIDEO1 Y C IN OUT Operating Multiple Projectors with the Remote Contr ol Y ou can operate multiple projectors with the same remote control in wireless operation. T o do so: 1. Select [Menu] → [Projector Options] → [Setup] → [P age 5] → [Projector ID] and assign an ID number to each projector .
E – 24 Using the RGB DIGIT AL connectors The Link mode function allows y ou to adjust or set multiple projectors using the RGB DIGIT AL and OPTION connectors. The D VI DIGIT AL input accepts up to the SXGA (1280 x 1024 @75Hz) signal in Link mode. NOTE: The Auto Adjust feature does not work for DVI digital signal.
E – 25 Using The Menus 1. Press the MENU button on the remote control to display the men u. 2. Use the ▲ or ▼ b utton on the remote control to select the sub menu. 3. The r ight-oriented delta symbol indicates fur ther choices are a vail- able. Press the 䊳 button to highlight the item y ou want to adjust or set in the selected menu.
E – 26 Customizing Basic/Custom Menu The Basic/Custom menu can be customized to meet y our requirements. Selecting a menu item from the "Basic/Custom Menu Edit" list, allo ws you to custom tailor the menu items to y our needs. 1. Select "Basic/Custom Men u Edit" to display the "Basic/Custom Menu Edit" screen.
E – 27 A List of Direct Key Combinations CTL+ INPUT (1-10) Switches to any selected signal f ound in the Entry List. T o enable this combination, y ou must first assign specific remote ke ys f or direct input selection in the Entry Edit window . CTL+ ENTER (While displa ying Entry list) Displa ys the Entr y Edit Command window .
E – 28 Menu T ree 0 – 100 NTSC, Graphics, Graphics NTSC, PAL/SECAM2.8, PAL/SECAM, Natural 1/Natural 2 Advanced Menu Source Select Adjust (Source) Ref Adj Factory Default Projector Options Help Tes.
E – 29 Maximum / Medium / Minimum Advanced Menu Source Select Adjust (Source) Ref Adj Factory Default Projector Options Help Test Pattern All Data / Current Signal Including Entry List Keystone Lamp Ref.
E – 30 Menu windows or dialog boxes typically have the following elements: Title bar : Indicates the menu title. Highlight: Indicates the selected menu or item. Solid triangle: Indicates further choices are availab le. A highlighted triangle indicates the item is active.
E – 31 Menu Descriptions & Functions Source Select Enables y ou to select a video source such as a VCR, D VD play er , laser disc play er , computer or document camera depending on what is connected to your inputs .
E – 32 Picture Select "List" and press ENTER to display the direct K ey assignment list. Select "OK" and press ENTER to close the window . T o close the List window , press CANCEL on the remote. Adjust (Source) This option corrects gamma.
E – 33 Horizontal/V ertical Position (when Auto Adjust is of f) Adjusts the image location from left to right. This adjustment is made automatically when the A uto Adjust is turned on. Aspect Ratio (not available for RGB) Y ou can select the aspect ratio for input signal and displa y area re- spectively .
E – 34 Color Matrix First, select an appropriate color matrix for your input signal, either HDTV or SDTV . Then select an appropriate matr ix type from B-Y/R- Y , Cb/Cr, Pb/Pr or IVX. NOTE: The Color Matrix feature is available for component video signal only .
E – 35 Select either the RGB signal type or the Component signal type. RGB ............. RGB signal Component .. Composite signals such as Y/Cb/Cr , Y/Pb/Pr NOTE: This feature is available on RGB 1 and 2 only . Gain This feature adjusts the input le vel of the signal.
E – 36 Lamp Mode This feature allo ws the lamp power supply to operate under three set- tings. Maximum ..... This setting consumes maximum current from the AC input and results in the most light output. NOTE: The Maximum mode shortens the lamp life.
E – 37 5. T o enable your setting, select Active on the Execute Switch. 6. Select OK and press the ENTER button on the remote control to complete the setting. NOTE: When On Timer is set and the projector is in the standby mode, the Status indicator flashes green to show that On Timer program is active.
E – 38 Setup Enables y ou to set operating options. Press "OK" to sav e your changes f or all the f eatures of P age1, P age2, P age3, P age 4 and P age5.
E – 39 Power Management When this option is on and there is no RGB input f or five minutes or more, the projector will automatically turn itself off. Power Off Confirmation This option determines whether a confir mation dialog f or tur ning off the projector will appear or not.
E – 40 Source Information Displays the status of the current signal. This dialog bo x has three pages. Projector Information Displays the inf ormation for y our projector such as lamp usage, serial number and v ersion number etc.
E – 41 Selecting a new signal that is close to one of the listed signals in horizontal and vertical frequency Selecting a new signal that is close to one of the listed signals in hori- zontal and v .
E – 42 6. SPECIFICA TIONS Optical P anel * 1 DMD TM .9" x 3 1280 x 1024 native resolution up to 1600 x 1200 with Adv anced AccuBlend TM T echnology Lamp 2.
E – 43 External Control RS232C (1) D-sub 9 pin Contact Closure Switcher (2) D-sub 15 pin In/Out Addressable Remote Control (wired / wireless) P ower Requirement 200-240 V AC , 50/60Hz Input Current 14 A P ower Consumption 2.
E – 44 7. Optional Accessories Lens TL-08SF (Short Focal Lens 0.84) : 10kg TL-1ZH (Zoom Lens 1.5 - 2.5:1) : 5.5kg TL-2Z (Zoom Lens 2.5 - 4.0:1) : 4.5kg TL-4Z (Zoom Lens 4.
E – 45 8. Compatible Input Signal List Compatible Input Signal List NOTE 1: The VGA, SVGA, XGA and UXGA signals are displayed with Advanced AccuBlend. NOTE 2: UXGA can be supported for separate sync signal only . NOTE 3: DVI digital signal can support a maximum resolution of SXGA@85Hz.
E – 46 Function Link mode Menu Source Select L Adjust(Source) Picture Brightness L Contrast L The others N White Balance N Image Pixel Adjust L (Phase) P osition L The others N Video Adj N Option Adj N Lens Memory N Signal T ype N Switcher N Ref Adj K eystone N Lamp N Ref .
E – 47 360 (14.17) 680 (26.77) 43 (1.69) 706 (27.80) 626 (24.65) 60 8 (0.31) (2.36) 286 (11.26) 43 (1.69) 52 (2.05) 973 (38.31) 1016 (40) 1155 (45.47) 836 (32.
E – 48 Tips on Adjusting Focus for Lens Memory Function Optimum f ocus for lens memory function can be achiev ed on the projector b y paying special attention in a f ew areas. Focus adjustment after the projector has w armed up to nor mal operating temperature is better than doing so when the projector is cold.
Printed in Japan.
デバイスNEC SX10000の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
NEC SX10000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNEC SX10000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。NEC SX10000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。NEC SX10000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
NEC SX10000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNEC SX10000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、NEC SX10000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNEC SX10000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。