NETGEARメーカーXE102の使用説明書/サービス説明書
ページ先へ移動 of 22
202-101 14-01 June 2007 NETGEAR , Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA XE102 W all-Plugged Ethernet Bridge User Guide.
ii v1.0, June 2007 © 2007 by NETGEAR, Inc. All rights reserved. June 2007. T rademarks NETGEAR is a trademark of Netgear , Inc. Microsoft, W indows, and W indows NT are registered trademarks of Microsoft Corporation. Other brand and product names are register ed trad emarks or tradema rks of their re spective holders.
v1.0, June 2007 iii Product and Publication Det ails T echnical Support See the support information card th at shipped with your product. By registering yo ur product at http://www .netgear .com/r egister , we can provide you with faster expert technical support and timely notices of product and software upgrades.
v1.0, June 2007 iv.
i v1.0, May 2007 Content s XE102 W all-Plugged Ethernet Bridge User Guide About This Manual . ................ ................ ................... ................. ................ ................ ........ iii Conventions, Formats, and Scope ......
ii v1.0, May 2007.
iii v1.0, June 2007 About This Manual The XE102 W all-Plug ged Ethernet Bridge User Guide describes how to install, configure, and troubleshoot the NETGEAR ® XE102 Ethernet Bridge or t he NETGEAR XE102G Ethernet Extender Kit. The information in th is manual is intended for readers with intermediate computer and Internet skills.
XE102 Wall-Plugged Etherne t Brid ge User Guide iv v1.0, June 2007 Product updates are available on the NETGEAR website at http://kbserver .netgear .com. How to Print This Manual T o print this manual, you can choo se one of the following options, according to your ne eds.
XE102 Wall-Plugged Etherne t Brid ge User Guide 1 v1.0, June 2007 Package Content s The product package should contain the following it ems: • Depending on the p ackage, one or two XE102 W all-Plugged Ethernet Bridges • 6-ft (1.83m) Ethernet cable • XE102 Resour ce CD , including: — This User Guide.
XE102 Wall-Plugged Etherne t Brid ge User Guide 2 v1.0, June 2007 Front Panel S t atus Lights The front panel of th e XE102 contains status lig ht s. Y ou can use them to verify connections. The table below describes the lights on the front panel. T able 1.
XE102 Wall-Plugged Etherne t Brid ge User Guide 3 v1.0, June 2007 How Ethernet Bridges Fit in Y our Network Y ou can use the XE102 Ethernet Bridges to ex tend an Ethernet local area network (LAN) anywhere in your house using your existing elect rical power line.
XE102 Wall-Plugged Etherne t Brid ge User Guide 4 v1.0, June 2007 Connect an XE102 Ethernet Bridge to the Router 1. Disconnect your router from its power adapter .
XE102 Wall-Plugged Etherne t Brid ge User Guide 5 v1.0, June 2007 Inst all the XE102 PowerLine Encryption Utility (Highly Recommended) This utility gives you the option of setting a unique encryption PowerLin e network password. Underst anding the PowerLine Network Password • The encryption password is not case-sensitive.
XE102 Wall-Plugged Etherne t Brid ge User Guide 6 v1.0, June 2007 The W elcome screen opens: 2. Click Install Software. Y ou can check for upgrades or install the from the CD. • Check for Upgrades : An Internet connection is requir ed. The CD software will check a NETGEAR server for a newer ve rsion of the utility .
XE102 Wall-Plugged Etherne t Brid ge User Guide 7 v1.0, June 2007 Set Y our Network Password The fastest and most reliable way to set the network password is to set the password for all de vices at once.
XE102 Wall-Plugged Etherne t Brid ge User Guide 8 v1.0, June 2007 3. Select a PowerLine device. 4. Click Enter Password. 5. Enter the password from the label on the back of the selected PowerLine device, and click OK. 6. Repeat this step for all devices that you want attached to you r netw ork.
XE102 Wall-Plugged Etherne t Brid ge User Guide 9 v1.0, June 2007 2. T ype a passw ord in the Private Network Password text box. 3. Click Set All Devices.
XE102 Wall-Plugged Etherne t Brid ge User Guide 10 v1.0, June 2007 2. Star t the PowerLine encryption utility on the re mote computer and select the Security tab. 3. Click Use Default (Public Netw ork). The password in the Private N etwork Password text box changes to the default password, HomePlug.
XE102 Wall-Plugged Etherne t Brid ge User Guide 11 v1.0, June 2007 T roubleshooting This section gives information about troubleshooting your XE102 W all-Plugged Ethernet Bridge. NETGEAR Product Registration, Support, and Document ation Register your product at http://www .
XE102 Wall-Plugged Etherne t Brid ge User Guide 12 v1.0, June 2007 HomePlug Light Not On If the power light is on but the HomePlug light is not, check the following: • Make sure that power is being provided to more than o ne PowerLine device. Another PowerLine device must be installed for su ccessful communication a cross the PowerLine.
XE102 Wall-Plugged Etherne t Brid ge User Guide 13 v1.0, June 2007 T echnical Specifications The following table shows technical specificatio ns for the XE102 W all-Plugged Ethernet Bridge. T able 9. T echnical Specifications Power input 100~240V AC Dimensions 48mm x 72mm x 103mm (Height x Wid th x Length) Weight 0.
XE102 Wall-Plugged Etherne t Brid ge User Guide 14 v1.0, June 2007.
デバイスNETGEAR XE102の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
NETGEAR XE102をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNETGEAR XE102の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。NETGEAR XE102の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。NETGEAR XE102で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
NETGEAR XE102を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNETGEAR XE102の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、NETGEAR XE102に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNETGEAR XE102デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。