NokiaメーカーLT280の使用説明書/サービス説明書
ページ先へ移動 of 20
1 2 3 4 5 6 NEC Projector Image Express Utility 2 for Mac OS User ’ s Guide For Mac OS X 10.2.8 and higher P C C A R D C O M P O N E N T I N U S B L A N A U D I O I N C O M P U T E R 3 I N C O M P U.
Intr oduction Thank you for purchasing the NEC projector . This user ’ s guide explains the basic LAN settings to use “ Image Express Utility 2 for Mac OS ” and how to operate it. For details, consult the help page for “ Image Express Utility 2 for Mac OS ” .
3 Contents Contents Introduction .............................................................................. Inside cover Contents ..................................................................................................... 3 1. What Y ou Can Do with Image Express Utility 2 .
4 1.What Y ou Can Do with Image Express Utility 2 1. What Y ou Can Do with Image Expr ess Utility 2 • Via the network images on the screen of your personal computer can be sent to the projector and projected on the screen.Wireless LAN enables you to use the projector without cables.
5 2 2.Operating Environment 2. Operating Envir onment 2-1. Supported Projector Image Express Utility 2 supports the following NEC projector (as of October 2005) L T Series WT Series L T380 / L T280 L T265 / L T245 WT615 / WT610 2-2.
6 3.Setting the LAN Settings for the Projector 3. Setting the LAN Settings for the Pr ojector This section explains about “Easy Connection” using wireless LAN.
7 3 3.Setting the LAN Settings for the Projector 4 Set “ Easy Connection ” . • L T380/L T280/L T265/L T245 (1) Select the [PC Card] tab, and confirm that “ Easy Connection ” has been set in Profiles. (2) Highlight [Reconnect], and press the <ENTER> button.
8 4.Setting the LAN Settings for Macintosh 4. Setting the LAN Settings for Macintosh This section explains the configurations for “ Easy Connection ” with the projector . 1 Click Apple Menu ( ) and [System Preferences...]. The “ System Prefer ences ” window will be displayed.
9 4 4.Setting the LAN Settings for Macintosh 4 Enter a new location name and click the [OK] button. Enter “ IEU2 ” as an example. 5 Click [Show] and [AirPort].
10 5.Installing Image Express Utility 2 5. Installing Image Expr ess Utility 2 5-1. Installation 1 Insert the User Supportware 3 CD-ROM into the CD-ROM drive. The CD-ROM icon will be displayed on Desktop. 2 Double-click the “CD-ROM” icon. 3 Double-click the “Mac OS X” icon.
11 6 6.Using Image Express Utility 2 6. Using Image Expr ess Utility 2 6-1. Connecting to a projector 1 Confirm that the projector has been turned on. 2 Click the AirPort status ( ) on the Macintosh menu bar , and click “ T urn AirPort On ” . The AirPort status is changed to “ ” or “ ” .
12 6.Using Image Express Utility 2 (4) Click [AirPort] tab. The AirPort configuration item will be displayed. (5) Check the “ Show AirPort status in menu bar ” check box at the bottom con- figuration item. The AirPort status ( / / ) will be displayed on the menu bar .
13 6 6.Using Image Express Utility 2 4 Enter the administrator name and password of your Macintosh computer , and click the [OK] button. The [Projector Selection] window will be displayed. 5 Check the ( ) check box to the left of the projector name to connect and click [Connect].
14 6.Using Image Express Utility 2 6-2. Stopping/Restarting Image T ransmission ■ Stopping image transmission 1 Click [T ools] on the menu bar , and click [Stop Sending]. Image transmission is temporarily stopped. ■ Restarting image transmission 1 Click [T ools] on the menu bar , and click [Start Sending].
15 7.Reference: Setting the Connection by Entering IP Address and Other Configurations 7 7. Refer ence: Setting the Connection by Entering IP Address and Other Configurations 7-1.
16 7.Reference: Setting the Connection by Entering IP Address and Other Configurations 2 Click [Network]. The Network configuration window will be displayed. 3 Click [Location] → “ New Location... ” , enter a new location name, and click the [OK] button.
17 7.Reference: Setting the Connection by Entering IP Address and Other Configurations 7 0 Click the AirPort status ( / ) on the menu bar , and SSID of the projec- tor to connect. • Click “ NECPJ ” in this example. The Macintosh computer is connected to the projector via wir eless LAN.
18 About the Downloading Service For update information on Image Express Utility 2 for Mac OS refer to the NEC Projector ’ s support page (http://www .
©NEC Viewtechnology , Ltd. 2005 Second edition October 2005 Reproduction, modification, and other uses are prohibited without the permission of NEC V iewtechnology , Ltd.
Image Express Utility 2 for Mac OS User ’s Guide 20.
デバイスNokia LT280の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Nokia LT280をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNokia LT280の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Nokia LT280の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Nokia LT280で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Nokia LT280を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNokia LT280の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Nokia LT280に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNokia LT280デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。