NordicTrackメーカー831.23665.2の使用説明書/サービス説明書
ページ先へ移動 of 28
CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Keep this manual for future reference. Serial Number Decal Model No. 831.23665.2 Serial No. QUESTIONS? As a manufacturer , we are com- mitted to providing complete customer satisfaction.
T ABLE OF CONTENTS IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 IMPORT ANT PRECAUTIONS W ARNING: T o reduce the risk of serious injury , read the following important precau- tions before using the elliptical exerciser . 1. Read all instructions in this manual and all warnings on the elliptical exerciser before using the elliptical exerciser .
4 BEFORE YOU BEGIN Congratulations for selecting the advanced NordicT rack ® AUDIOSTRIDER 600 elliptical exerciser . The AUDIOSTRIDER 600 elliptical exerciser provides a wide array of features design.
5 ASSEMBL Y Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included hex keys and your own phillips screwdriver , adjustable wrench , and rubber mallet .
6 2. Attach the Left and Right Frame Covers (36, 37) around the Frame (1) with four #8 x 1/2" Blunt Screws (92). 3. With the help of another person, carefully tip the elliptical exerciser onto its side. Attach the Center Foot (40) to the Frame (1) with two #8 x 1/2" Screws (81).
5. Orient the Left and Right Upright Covers (19, 20) as shown. Attach the Upright Covers around the Upright (10) with five #8 x 1/2" Blunt Screws (92). 7 5 19 20 10 92 92 92 4. While another person holds the Upright (10) near the Frame (1), connect the Upper Wire Harness (65) to the Lower Wire Harness (64).
8 7. Attach the Left Upper Body Arm (22) to the Left Upper Body Leg (24) with three M8 x 16mm Patch Screws (84) and three M8 x 23mm W ashers (31); start all three Patch Screws and then tighten them. Attach the Right Upper Body Arm (23) in the same way .
9 8. Have another person hold the Left Rear Upper Body Cover (26) and the Left Front Upper Body Cover (27) around the Left Upper Body Leg (24). Attach the Left Rear Upper Body Cover (26) with a #8 x 3/4" Screw (78). Then, attach the Left Front Upper Body Cover (27) with four #8 x 3/4" Screws (78).
10 1 1. Orient a Pedal Arm (32) as shown. Attach the Left Pedal (34) to the Pedal Arm with three M8 x 40mm Button Screws (90), three M8 Split W ashers (97), and three M8 x 23mm Washers (31). Next, attach a Pedal Arm Cover (39) to the Pedal Arm (32) with a #8 x 3/4" Screw (78).
11 13. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. T o protect the floor or carpet from damage, place a mat under the elliptical exerciser .
12 HOW T O USE THE ELLIPTICAL EXERCISER HOW TO FOLD AND UNFOLD THE ELLIPTICAL EXERCISER When the elliptical exerciser is not in use, the frame can be folded out of the way . T o fold the elliptical exer- ciser , lift the handle on the rear of the elliptical exerciser until the elliptical exerciser locks into the vertical posi- tion.
13 HOW TO EXERCISE ON THE ELLIPTICAL EXERCISER T o mount the elliptical exerciser , hold the upper body arms and step onto the pedal that is in the lowest posi- tion. Next, step onto the other pedal. Push the pedals until they begin to move with a continuous motion.
14 CONSOLE DIAGRAM FEA TURES OF THE CONSOLE The advanced console offers an array of features designed to make your workouts more effective and enjoyable. When you select the manual mode of the console, you can change the resistance of the pedals with the touch of a button.
15 HOW TO USE THE MANUAL MODE Note: If there is a sheet of clear plastic on the face of the console, remove the plastic. Press any button on the console or begin pedaling to turn on the console. When you turn on the console, the display and the program target pacer will light.
16 Measure your heart rate if desired. If there are sheets of clear plastic on the metal contacts on the handgrip pulse sensor , remove the plas- tic. In addition, make sure that your hands are clean. T o mea- sure your heart rate, hold the handgrip pulse sen- sor with your palms resting against the metal con- tacts.
17 HOW TO USE A PRESET PROGRAM Press any button on the console or begin pedaling to turn on the console. See step 1 on page 15. Select a preset program. T o select one of the four preset programs, press the Weight Loss, the Aerobic 1, the Aerobic 2, or the Performance button on the left side of the console.
18 HOW TO USE A HEART RA TE PROGRAM Press any button on the console or begin pedaling to turn on the console. See step 1 on page 15. Select a heart rate program. T o select one of the heart rate programs, press the Heart Rate 1 or the Heart Rate 2 button on the left side of the console.
19 While you exercise, the program target pacer will prompt you to maintain a constant pedaling speed. When a left indicator lights, increase your pace; when a right indicator lights, decrease your pace. When the center indicator lights, maintain your current pace.
20 Inspect and tighten all parts of the elliptical exerciser regularly . Replace any worn parts immediately . T o clean the elliptical exerciser , use a damp cloth and a small amount of mild soap. Important: T o avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight.
21 CONDITIONING GUIDELINES The following guidelines will help you to plan your exercise program. Remember that proper nutrition and adequate rest are essential for successful results.
22 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. T oe T ouch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
23 NOTES.
24 Key No. Qty . Description Key No. Qty . Description P ART LIST—Model No. 831.23665.2 R1007A 1 1 Frame 2 1 Folding Frame 3 1 Rear Stabilizer 4 1 Front Stabilizer 5 1 Left Pedal Bracket 6 1 Right P.
25 Key No. Qty . Description Key No. Qty . Description Note: “*” indicates a non-illustrated part. Specifications are subject to change without notice.
26 EXPLODED DRA WING A—Model No. 831.23665.2 R1007A 1 4 10 11 17 17 19 20 22 23 72 24 26 27 28 29 32 32 34 35 5 6 36 37 39 39 65 66 66 67 67 67 67 68 68 69 71 7 7 7 7 8 8 9 9 70 25 21 21 38 40 41 16.
27 2 3 14 15 16 16 12 13 13 30 30 44 45 46 47 48 12 52 52 49 50 51 53 53 53 53 55 55 56 57 58 58 59 59 60 61 64 18 18 42 42 42 42 43 43 54 54 54 54 62 62 63 63 74 87 87 94 94 94 94 85 85 81 81 79 89 86 88 88 88 88 98 98 85 85 81 89 86 79 81 81 99 99 81 76 93 31 31 100 EXPLODED DRA WING B—Model No.
Part No. 2531 16 R1007A Printed in USA © 2007 ICON IP , Inc. ORDERING REPLACEMENT P ARTS T o order replacement parts, see the front cover of this manual. T o help us assist you, please be prepared to provide the following information when contacting us: • the MODEL NUMBER of the product (831.
デバイスNordicTrack 831.23665.2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
NordicTrack 831.23665.2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNordicTrack 831.23665.2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。NordicTrack 831.23665.2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。NordicTrack 831.23665.2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
NordicTrack 831.23665.2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNordicTrack 831.23665.2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、NordicTrack 831.23665.2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNordicTrack 831.23665.2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
