OkiメーカーB4545 MFPの使用説明書/サービス説明書
ページ先へ移動 of 154
59387801_cvr.jpg.
B4545 MFP User’s Guide 2 Copyright Information Copyright © 2006 by Oki Data. All Rights Reserved Document Information ____________________ ____________ B4545 MFP User’s Guide P/N 59387801, Revision 1.
3 W ELCOME You have just acquired a new generation communications terminal from Oki Data and we congratulate you on your choice.Thi s multi-function terminal is capable of faxing, printing and scanning and fu rthermore can be used for Internet communications.
B4545 MFP User’s Guide 4 Contents Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Installing your terminal . . . . . . . . . . . . . . . . . . . . . . . . 9 Installation requirements . . . . . . . . . . . . . . . . . . . .
B4545 MFP User’s Guide 5 Internet Conn ection . . . . . . . . . . . . . . . . . . . . . . . . 60 Deactivati ng the Inte rnet functi on . . . . . . . . . . . . . . 61 Message service and the LAN . . . . . . . . . . . . . . . . . . . 61 Initialization parameters .
B4545 MFP User’s Guide 6 Specific copy settings . . . . . . . . . . . . . . . . . . . . . . . 89 Local Copy Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Description of ID CARD MODE . . . . . . . . . . . . . . . . . 97 Paper tray . . .
B4545 MFP User’s Guide 7 Miscellaneous incidents . . . . . . . . . . . . . . . . . . . . . 148 Terminal packing and transportation . . . . . . . . . . . 149 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 Unit characteristics .
8 Console 1. K ey . Stops current printing 2. K ey . Help in terminal u se. 3. K ey . Local photocopy . 4. K ey . R educe or enlarge. 5. PC K ey . Scan to PC / scan to FTP . 6. K ey . Scan to e-mail (send an Internet fax). 7. K ey . Duplex print 8. K ey .
9 I NSTALLATION Installing your terminal Installation requirements A proper location helps to ensure that your printer provides you with the long service life for which it is designed. Double-check to make sure that the location you select has the following characteristics.
10 Installation • The grounded powe r outlet (refer to t he safety i nstructions in the Safe ty section) you plan to connect to for power shoul d be nearby and not obstructed.
Installation 11 • Do not allow water or other liquids to s pill on or near the terminal. Fire or electrical shock can occur should water or liquid come into contact with the terminal. • Should liquid or any piece of metal accid ently ge t inside the printer , immediately turn it off , unplug the power cord, and contact your dealer .
12 Installation Unpacking the optional paper tray + Remove the plastic bags and check for the parts illustrated below. 1 Paper Tray 2 Mechanical unit paper tray 3C a r d b o a r d box Installing the o.
Installation 13 Unpacking the duplex unit (optional) + Remove the plastic bags and check for the parts illustrated below. 1 Duplex Unit 2 Cardboard Box + Installing the Duplex unit (refer to paragraph Installing the Duplex unit (option al) , page 22).
14 Installation Description 1 Adjustable Paper Guide 2 Scroll Scanner (ADF) 3C o n s o l e 4P r i n t e r 5 Second Paper Tray (Optional) [500 pages] 6 Printer Paper Feed Tray 7M a n u a l P a p e r Fe.
Installation 15 Installing the removeable parts This section details the installation of the terminal’s removable parts. Installing the scanner paper tray + Secure the document feeder by fitting the two clips ( B ) in the no tches ( A ) provided for this purpose.
16 Installation Installing the printer output stacker + Insert the two clips ( B ) of the stacker into the notches ( A ) provided for this purpose. Installing the printer paper tray + Hold the tray in front of the printer (as shown in the drawing). Align the tabs in the tray with the notches in th e printer.
Installation 17 Loading paper + Remove the cover from the printer paper tray. + Press the paper size guide inside the tray on the right, in order to push both paper size guides to the left or to the right. + Put a stack of paper into the tray (do not put in more than 250 pages).
18 Installation + Replace the printer paper tray cover. Paper useable in the prin ter : Printer paper tray 16 to 24 l b (60 to 9 0 g/m 2) Manual feed 16 to 43 lb.
Installation 19 Adjusting the original document output tray + Depending on the size of pap er to scan, Le tter or LGAL (LEGAL), adjust the supply stop.
20 Installation Installing the second paper tray (optional) 1. Remo ve the second paper cassette uni t and tr ay 2 from their packaging, including the protective tape used to hold the variou s components in place. 2. Position the printer abov e the additional paper tra y unit.
Installation 21 Remark : always hold the paper tr ay with both hand s when remo ving it or putting it back into the additional paper unit. 5. Put a stack of 500 paper sheets, maximum, into the paper tray , making sure to alway s position the paper so that the up-side, when the paper is packed, is alwa ys facing up.
22 Installation Installing the Duplex unit (optional) After installation and connection, the duplex unit will enable you to print, receive faxes or print local phot ocopies in duplex mode. + Switch off your terminal and pull out the mains plug. + Take the duplex unit out of its bo x and remove the protective film.
Installation 23 + Clip the connector of the flat cable ( E ) of the duplex unit in the connector ( D ) located at the bottom left hand side of the terminal. + Insert the two plastic clips ( B ) in the two slots ( A ) provided for this purpose. + Hold the module in its housing, tip the ac cess door to the two blue-col ored lo cking clips backwards.
24 Installation + Hold the duplex unit in position and pr ess the two blue colored clips firmly, one after the other, ( A ) while rotating them ¼ of a turn clockwise, to lock the duplex unit to the back of your terminal. + Once the module is locked in position , close the door.
Installation 25 Connections + Make sure the On/Off switch is in position o (Off). A B C D F E G Légende du schéma : A : Parallel port B : USB Port C : LAN socket D : Telephone line socket E : Power .
26 Installation Telephone and LAN connect ion + Plug the end of the telephone line ( F ) into the terminal socket ( D ) and the other end into the wall telephone socket.
27 G ETTING STARTED N AVIGATION METHODS P RESENTATION The navigator gives you access to the menus v isible on screen. The navigator This navigator h as 4 keys and allows you to move within the menus available on your terminal.
28 Getting started Moving within the menus T o Use key Symb ol used Enter the main menu and move down throug h the menus. Select the next line in a menu. Select the previous line in a menu. Validate the current selection. OK Return to the previous menu.
Getting started 29 Moving within a data entry field The display screen The screen has two lines of 16 characters. The cursor shows the line you selec ted. For menus with more than two choices, use the arrows or of the navigator to obtain the next (hidden) lines of the menu (3,4, etc.
30 Getting started A CCESS TO FUNCTIONS Access to function s may be achieved in two ways. • Menu-driven access. • Direct func tion access. Menu-driven access You can print the guide to find out the number of a function by pressing the key or by scrolling through the menus, as indicated below.
Getting started 31 G UIDE TO FUNCTION LIST MAIN MENU 1: D IRECTORY Functions Function descri ption Page 11 OK - N EW C ONTACT Enter a new contact in the directory p. 65 12 OK - N EW L IST Enter a relay broadcast list p. 67 13 OK - M ODIFY Modify a record or a list p.
32 Getting started 2522 OK P REFIX SET - TING Setting dialing prefix p. 41 253 OK - L OCAL N ETWORK LAN parameters set tings p. 51 2531 OK C ONFIGURATION Manual configuration p. 51 2532 OK IP ADDRESS Fax IP addr ess p. 51 2533 OK SUBNET MASK subnet mask p.
Getting started 33 3911 OK A CTIVATION Rerouting activation p. 79 392 OK T X FORWARD . Tx forwarding function p. 80 3921 OK A CTIVATION Tx forwarding activation p.
34 Getting started MAIN MENU 4: SMS S ERVICE ( THIS FEATURE IS NOT AVAILABLE IN THE ) Functions Function description P age - MAIN MENU 5: P RINT Functions Function description P age 51 OK - F UNCTIONS LIST Function list printing p. 102 52 OK - L OGS Print TX and RX logs p.
Getting started 35 821 OK S ENT PAGES Printed pages counter p. 103 822 OK R ECEIVED PG Local copies counter p. 103 823 OK S CANNED PAGE Sent pag es counter p. 103 824 OK D UPLE X SCAN Received pages counter p. 103 825 OK P RINTED PG Printed pages counter p.
36 Getting started 923 OK S ERVERS SMTP, POP3 and DN S parameters p. 55 9231 OK SMTP SMTP server p. 54 9232 OK POP3 POP3 server p. 54 9233 OK DNS 1 Primary DNS p. 54 9234 OK DNS 2 Primary DNS p. 54 924 OK SMTPA UTHENT . SMTP authentification access parameters p.
37 Getting started MAIN MENU 10: M EDIA Functions Function description P age 02 OK - P RINT DOCUMENT Printing documents p. 115 021 OK L IST Printing the document list p. 115 022 OK F ILE Printing files p. 116 0221 OK A LL Printing all printable files p.
38 S ETTING YOUR TERMINAL M AIN SETTINGS At terminal powerup, the screen displays: You have to set the date and time, telephone n etwork, language paramete r and verify the other parameters listed below. B EFORE TRANSMISSION Date/Time At any moment you may c hange the date and time on your fax machin e.
39 Setting your term inal To change the date and ti me: 21 OK - SETUP / DATE/TIME + Enter the numbers of the required time and date one after another, (for example November 8 2006 at 9h33 , press 0 8 1 1 0 6 0 9 3 3) and press OK to confi rm.
Setting your term inal 40 Your fax number/your name Remark : In the U nited States, as required by FCC regulations, a he ading must be in cluded on all FAX mes sages.
41 Setting your term inal To select the ne twork: 202 OK - SETUP / GEOGRAPHICAL / NETWORK + Select the required option and press the OK key to confirm. Language This setting enables you to choose a l anguage other than that imposed by the Co untry sett ing.
Setting your term inal 42 Defining the local prefix 2522 OK - SETUP / NET WORKS / PREFIX / PREFIX SETTING + Enter the outgoing local prefix of the company’s telephone network (maximum 5 characters) and validate with OK . Transmission report You may print a transmission report for all communications over the telephone network (STN).
43 Setting your term inal Modifying th e economy pe riod: 233 OK - SETUP / SEND / ECO PER. + Enter the hours of the new economy period and confirm your selection with the key OK . Using the economy period: 32 OK - FAX / ECO TRANS. Enter the call number and confirm with OK .
Setting your term inal 44 Print fax messages stored in the memory 381 OK - FAX / FAX ANSW. / PRINT + If you have defined an access code for your fax answering machine, enter it and press OK . Documents received and stored in the memory are printed.
45 Setting your term inal To activate relay from your fax machine : + Insert the document to relay (refer to paragraph Document depositing , page 74). + Select 37 OK- FAX / BROADCAST . + Enter the remote fax number wh ere you will relay to or choose your dialing mode (refer to paragraph Dialing , page 76) and press OK .
Setting your term inal 46 To select the fax print mode : 244 OK - SETUP / RECEPTION / DUPLEX + Select the required option SINGLE SIDED or DOUBLE SIDED and validate your choice with the OK key. + Adjust to page This option allows you to print out documents automatically adjusting them to the page format.
47 Setting your term inal T ECHNICAL PARAMETERS As delivered your fax is preset by default. H owever, you may ad just it to meet your requirements by resetting the te chnical parameters. To set the techn ical parameters: 29 OK - SETUP / TECHNICA LS + Select the desired parameter and confirm with OK .
Setting your term inal 48 10 - RX HEADER 1 - WITH 2 - WITHOUT If this parameter is on, all documents received by your fax will include the subscriber’s header with his name, number (if ava ilable) fax print date and the page number. Note: In the United States, as requir ed by FCC regulati ons, a heading must be included on all FAX messages.
49 Setting your term inal 74 - ERASE MAILBOX 1 - WITH When the fax machine receives an e-mail with an attachment and cannot open it, it erases the message from the ISP MBX, prints and transmits with a notice of incomprehension to the message sender.
50 Setting your term inal L OCAL A REA N ETWORK (LAN) SETTINGS Your terminal is a new generation machine that will be part of your local network just like a PC.
Setting your term inal 51 To configure the local ne twork setting manually: 2531 OK - SETUP / NETWOR KS / LOCAL NETWORK / CONFIGURATION + Choose MANUAL and press OK to confirm. IP address 2532 OK - SETUP / NETWOR KS / LOCAL NETWORK / IP ADRESSE + Enter the IP address of your terminal and press OK to confirm.
52 Setting your term inal These two addresses must be filled in for the Scan To Disk function (refer to paragraph Scan to Disk , page 84). 2538 OK - SETUP / NETWORKS / LOCAL NETWORK / WINS 1 2539 OK - SETUP / NETWORKS / LOCAL NETWORK / WINS 2 + Enter the IP address of each server, then validate with OK .
Setting your term inal 53 Summer time 2555 OK - SETUP / NETWORKS / SNTP S ERVER / SUMMER TIME + Select the appropriate time setting in the drop-down list: winter time, summer time +1 or summer time +2, then validate with OK . Remark : This menu is not display ed if the menu 212 is activ ated.
54 Setting your term inal M ESSAGE SERVICE AND THE I NTERNET Your terminal lets you send and receive documents and E-mails from subscribers throughout the world over the Internet. An E-mail is an electronic messag e sent over the Internet, to an E-mail address (which is a personal I nternet mailbox).
Setting your term inal 55 Choosing NO ACC ESS disables access to Internet functions. OK . 92 OK - INTERNET / INIT. PROVIDER 921 OK - INTERNET / INIT. PROVIDER / CONNECTION + Enter the CALL NUMB. , press OK . + Enter connection IDENTIFI ER 1 , press OK .
56 Setting your term inal You should then complete the follo wing MENUS on your fax ma chine: Your terminal is now configured. 91 Supplier Provider 1 Connection 9211 Call numb. 0860001000 9212 Identifier sg048944@wn.net 9213 P assword ***** MESSAGE SERVICE 9221 Email ID demo jt 12 9222 EMAIL PASSWORD ***** 9223 E-Mail adr demo2@gofornet.
Setting your term inal 57 S ETTINGS The settings are divided into several categories: • the standard settings define the connection type and frequency to the Internet as well as the transmi ssion type for your documents, • the E-mail sorting defines treatmen t for all stored E-mail messages recei- ved.
58 Setting your term inal Changing the conn ection period ( PERIODIC type) 943 OK - INTERNET / SETTINGS / PERIOD + With the PERIODIC mode, enter the new connection period by means of the numerical keypad (between 00:01 am and 11:59 pm) and press OK to confirm.
Setting your term inal 59 Mail sorting This function lets you choose the mode for all Internet documents stored in your mail box. You have three choices: • F@X ON LY, lets you poll and print E-Mails in your terminal.
60 Setting your term inal To use the fax as an E-Mail printer: + Select option W/O PC TRANS an d press OK to confirm. + Select your option from the table below and validate with OK . At each connection, the number of E-mails still present in your mailbox are displayed on the screen.
Setting your term inal 61 D EACTIVATING THE I NTERNET FUNCTION If you do not wish to use the Internet functions: 91 OK - INTERNET / SUPPLIER + Select NO ACCESS in the ISP list and confirm with OK .
62 Setting your term inal Access to servers parameters 922 OK - INTERNET / INIT. ETHERNET / SERVERS + Enter SMTP , press OK . + Enter POP3 , press OK . + Enter DNS 1 (primary), press OK . + Enter DNS 2 (secondary), press OK . Sample LAN settings for the terminal If your LAN settings are as follows: Non-functional data given by way of example.
63 Setting your term inal Your terminal now configured, you can: • configure the standard settings, to connect to your LAN, and the E-mail sorting ( refer to paragraph Settin gs, page 57), • confi.
64 D IRECTORY Your fax lets you create a directory by memorizing contact records and contact lists . • Y our terminal can store up to 500 contact records with names and phone numbers. • Y ou may al so group several names to build a contact lis t with up to 32 contact lists .
65 Directory C REATING CONTACT RECORD For each contact record, complete the fiel ds listed below. Only fields with the Name and Telephone number have to be completed: •C o n t a c t NAME , • TEL and fax number of contact, • E-mail address, ex ample: jones@messagerie.
Directory 66 + Select the option WITH assigned key if you want to assign a letter (shortcut key) to your contact. The first available letter appear s by default. If you want to change it, scroll the letters by means of the or keys, and press OK to confirm.
67 Directory A DDING A LIST To add a list: 12 OK - DIRECTORY / NEW LIST + Your fax machine has just created a new list, fill it in by first entering the name of this list then confirm with OK . Remark : Y ou can stop a list or record creatio n at any time by pressing .
Directory 68 A DDING OR DELETING A NUMBER FROM THE LIST 13 OK - DIRECTORY / MODIFY + Select the contact list (L) by mean s of the or keys and valid ate your choice with OK . + Press OK to display the ENTER ABR. NUM. field, and add or delete the contact as shown in the table hereafter: + Confirm the new list by pressing key.
69 Directory D ELETING A RECORD OR A LIST 14 OK - DIRECTO RY / CANCEL The directory appears in alphabetical order. + Use the or keys to select the contact record or contact list (L) you wish to delete and confi rm with OK . + Press again OK to confirm yo ur deleting.
Caution - You must enter a value for at least one of the Fax numbe r or E-mail addr ess fields. To enter a blank line, key in four field separator characters in a row. For example: Smith;0123456789;js mith@isp.c o.uk;J;8 Jones;01987654321;;@;8 O'Connor;0123469874 ;d.
71 Directory Caution - You must always enter the field sepa rator character, even if one or more of the fields are left blank. In th e example above, which uses a semi-colon as a separator, the entry for « Jones » lacks both E-mail address and shortcu t key.
Directory 72 + Repeat the procedure as many times as required, for instance to update all your fax machines or send the same file to several PC users on your local network. LDAP SERVER The LDAP server allows you t o access a direct ory server, for contacts or lists of contacts (maximum 500 recipients).
73 Directory then, you should complete the follo wing MENUS on your fax machine: Your terminal is now configured. Remark : For more inform ation on LDAP configu ration, refe r to your LAN ad ministr a- tor or to your LDAP server documentation.
74 O PERATION S ENDING Faxes sent over the telephone networ k are sent from the feeder or the memory. Documents sent over the Internet are first memorized and sent at the time of Internet connection. Over the teleph one networ k: all fax transmissions are in black and white.
75 Operation Remark : Since the ad dressee’s number is generally on the document to be trans - mitted, you may also dial before positioning the document. From the flat scanner C HOOSING THE RESOLUTION / CONTRAST Resolution You have 4 modes for document transmissi on.
Operation 76 + Press as many times as neces sary to choose the desired cont r ast, as shown by the position of a cu rsor . D IALING From the directory dialing alphabetically + Enter the first letter of your subscr iber’s name with the alphanumeric keypad, then add the remaining letter s until your subscriber’s name is complete.
77 Operation + You may enter the call number of the subscriber using the key block or the directory. + Confirm with the key to send the fax copy. When the redial list is not empty th e display will show: + Using the keys or within the navigator you can scroll through the numbers already available in the Redial-list.
Operation 78 + Press key and enter the number of the second subscriber or second subscriber list + Repeat this last step for all subscrib ers or subscriber lists (maximum 10 subscribers or subscriber lis ts). + Press OK , , or to confirm the last addressee depending on the required operation.
79 Operation + You may enter the number of pages before transmission and confirm with OK . + Confirm postponed transmission by pressing key . Your document is stored and will be sent at the new time.
Operation 80 + Confirm with the OK key. Remark : If the function WITHOUT is selected the menu 3912 will not be included in the functions overview , when it is printed out.
81 Operation T RANSMISSION OVER THE I NTERNET Sending a black and white document to an E-Mail address + Position the document (refer to paragraph Document depositing , page -74). + Press the key and ent er the recipient’s E-mail address or choose your dialing mode (refer to paragraph Dialing , page -76).
Operation 82 Access throug h the menu. 95 OK - INT ERNET / E-MAIL Direct access. + Press key . Then, to send to E-mai l address. + Enter the addressee’s E-mail address or choose your dialing mode (refer to paragraph Dialing , page -76). + Enter the address of who you want to receive a copy of t he document (CC:), and press OK to confirm.
83 Operation Your contact will receive an E-mail with an attachment. Scan to FTP The scan to FTP function enables you to put your TIFF, JPEG and PDF files in an FTP server, for example, for archiving. To connect to the FTP server, you must know the name of the FTP user and the PASSWORD.
Operation 84 Then carry out the same operations as for sending to one address, except that you select an FTP address group in the directory, and not a single address. Scan to Disk The Scan to Disk function allows you to place your TIFF, JPEG and PDF files in a shared directory, on your PC for instance.
85 Operation T RANSMISSION WAITING QUEUE This function lets you obtain a re cap of all documents queuing, for transmission, including those in deposit or in delayed transmission, etc.
Operation 86 + You may now modify th e parameters of the given document then confirm your modifications by pres sing key . Deleting a transmission on hold 63 OK - COMMANDS / CANCEL + In the waiting queue select the desired document and conf irm your choice with OK .
87 Operation C ANCELLING A TRANSMISSION IN PROGRESS Cancelling a transmission in progress is possible whatever the type of transmission but varies depending on whether the transmission is a single call number or a multi-call number. • For a s ingle call number from the memory , the document is er ased from the memory .
Operation 88 C OPYING Your fax offers to print out one more copies of one or more page s. If the duplex module (depends on mode l) is installed on your terminal, you can make duplex mode photocopies. L OCAL COPY Standard copy + Position the document (refer to paragraph Document depositing , page -74).
89 Operation "Sophisticated" copy + Position the document (refer to paragraph Document depositing , page -74). + Press key . + Enter the required number of copies and confirm with the OK key.
Operation 90 Scanner and printer settings 841 OK - ADVANCED FCT / COPY / RESOLUTION + The RESOLUTION parameter adjusts the photocopying resolution. Select HIGH SPEED , QUALITY or PHOTO RESOLUTION using keys or , then validate the choice with the OK key.
91 Operation + Set the required coordinates with the numeric keypad or or . Confirm your setting by pressin g key OK . 845 OK - ADVANCED FCT / COPY / CONTRAST + The CONTRAST parameter is used to select the photocopy contrast. Adjust the contrast us ing keys and , then validate the choice with the OK key.
Operation 92 SAVE This function prints all your documents duplex. Remark : This function requires the prior installation on the rear of your terminal of the duplex module and the additional paper tray (option or depending on model). + Select WITH or WITH OUT using key s and .
93 Operation Number of copies Enter the menu and go to the first option: selection of the n umber of copies (except if the slip is entered via the "number" + OK key combination, in which cas.
Operation 94 The Mosaic mode (n up) is available fr om the ADF scanner only, since 2 or 4 pages will have to be scanned before printing, and page changes are not managed on the flatbed scanner. Paper tray selection This selection is available only if the printer includes at least two trays.
95 Operation Duplex mode (With optional duplex unit installed) This selection is not available fo r flatbed copies (page changes are not managed on the flatbed scanner) or for the Identity Card mode.
Operation 96 This mode only makes sense on the ADF scanner (a document shall inc lude several pages) and with a number of copies ex ceeding 1. For an assembled copy , the document is faxed in 200 dpi fax mode then encoded (MMR coding) and stored in the flash memory.
97 Operation D ESCRIPTION OF ID CARD MODE The IDENT. CARD copy function is us ed for copying both sides of an identity card or driving license ty pe document (siz e 5.5 x 8.8) on a Letter format sheet. This function will be available only from the flatbe d scanner for local copy.
Operation 98 + Press the OK key. The following will be displayed: + With keys and select paper. + Press the OK key. The following will be displayed: + Insert your identity card on the flatbed scanner’s glass.
99 Operation P APER TRAY Default tray for local copy With same paper format in both trays In this case, all selections made for this parameter will determine the default tray in the local copy slip. The tray can however be changed on a ca se by case basis i n the slip.
Operation 100 Should the format be incompatible, the printer will turn to " PAPER INCOMPATIBLE " error condition. With the parameter set to AUTO TRAY In this case, your terminal will automa .
101 Operation Default tray for PC printing In PC printing mode, the printer driv er's tray setting will override the terminal’s tray setting. The PC driver will indicate the following to the terminal: • which tr ay to use for printing: upper , lower , auto, • the format of each page: A4, Letter , A5, B5, .
Operation 102 O THER FUNCTIONS L OGS The incoming and outgoing logs list th e last 30 transmissions (incoming and outgoing) made by your terminal. An automatic print out will take place after every 30 transmissions. However, you may request a print out at any time.
103 Operation F ONT PRINTING You can print the list of fonts insta lled on your terminal at any time. To print PCL fonts: 57 OK - PRINT / PCL FONTS To print SG Scri pt fonts: 58 OK - PRINT / SGSCRIPT FONTS Your fax prints the list of fonts. C OUNTERS At any time, you may consult the acti vity counters of your terminal.
Operation 104 Setting the te rminal for document depo sits , you must define the type: • SIMPLE- it may be polled only once from the me mory or feeder • MULTIPLE- it may be polle d as many time s .
105 Operation + Depending on the type of poll you should: Choice Procedure Immediate poll + Press Delayed po ll + Press OK + Next to the current time, enter the time you wish to poll the document and .
Operation 106 L OCK There are restrictions to the use of your fax: • T o lock the printing of received d ocuments ( refer to paragrap h Fax answering machine , page -43), • locking the keyboard, • locking the numbers, • locking the Internet settings, • locking the access to the SMS tr ansmission function.
107 Operation Locking the numbers This function locks dialing and th e numerical keypad is disabled. Transmissions are only possible from numbers included in the directory. You can still send mails by typing in the addressee’s address (if this has no numbers in it).
Operation 108 S CAN TO PC Remark : your terminal is provided with a Scan to PC key . This key activ ates, first of all, the SCAN - TO - PC function, which when associ ated with Companion Suite Pro , makes it possible to se nd an opening notice of a sc an function of a PC connected to your ter- minal.
109 Operation F UNCTION MANAGEMENT BY THE ADMINISTRATOR By default, the "Department Code" function is deactivated when the terminal is first put into service. Activating the department code 881 OK - ADVANCED F CT / DEPT. CODE / ACTIVA- TION + Using the browser’s or keys, select WITH .
Operation 110 + Press OK to confirm the line 8821>DEPT. CODE . + The screen displays MA STERC ODE and **** . + Using the key, go to the **** line and enter your 4-digit department code (remember this cod e). + Confirm the code by pressing OK . + Using the browser’s key, select 8822 DEPT.
111 Operation + Enter your administrator mastercode. 883 OK - ADVANCED FCT / DEPT. CODE / DELETE + Enter the number of the department code you want to delete or search for it using the or keys. + Confirm by pressing OK . A confirmation screen is displayed.
Operation 112 Printing the department report The administrator may print reports for all the departments created. To do so: 884 OK - ADVANCED F CT / DEPT. CODE / PRINT + Enter the administrator department number 00 and confirm by pressing OK . The terminal prints the report, as shown in the illustration below.
113 Operation U SE OF THE DEPART MENT CODES BY A DEPARTMENT To access the different terminal functions, each departmen t must enter its own access code as deliv ered by the administrator.
Operation 114 Example: The charge code will always be hidden. The maximum length that can be entered is 30 characters. When dialing, only the digits are sent on the line. The "+" symbol inserted is not sent. In the example above, the number 9738088444 0123 is dialed.
115 Operation U SE OF THE USB MEMORY KEY P RINT YOUR DOCUMENTS You can print the stored files or a list of the files located in the USB memory key. Print the list of file s located in the key 02 OK - .
Operation 116 Print the files located in the key 022 OK - MEDIA / PRINT DOCUMENT / FILE + Insert the USB memory key on th e front side of the terminal respecting the way of insertion. + MEDIA ANALYSIS appears on the screen. + Select PRINT DOC. with the or buttons and conf irm with OK .
117 Operation •S e l e c t ALL with the or buttons and confirm with OK . • Y ou come back to the previous menu. • SERIES , to delete sever al files located in the USB memory k ey . •S e l e c t SERIES with the or buttons and confirm with OK .
118 Operation + Select SCAN TO with the or buttons then confirm with the OK button. Caution - you can also access this function in two ot her ways: • By pressing the SCAN button of the terminal deck the n by selecting SCAN-TO-MEDI A . By pressing the button ON the control panel then by typing 03 on the digital keyboard.
119 Operation You may receive and send through an MBX in complete confidentiality. The deposit a document into your MBX, the access code is not needed.
120 Operation In polling, the MBX are only ac cessible with an MBX code. You may perform MBX deposits or polls by: • depositing a document in a fax MBX • transmit to deposit a docume nt in a remote fax MBX •p e r f o r m document poll from a remote fax .
121 Operation All documents found in the MBX are printed and t he MBX is emptied. Deleting a MBX Before deleting an MBX, you need to make sure it is empty, by printing its content. 74 OK - MAILBOXES / DELETE MBX + Select a free MBX out of the 31 MBX or directly enter the number of a free MBX and confirm with OK .
122 Operation + Confirm the transmission request to a remote MBX fax by pressing key . In the case of an immed iate transmission, the documen t is sent immediately. If the document is set for a postponed transmission the document will be stored in the memory and sent at the requested time.
124 M AINTENANCE Maintenance General To ensure the best operating conditio n s f o r y o ur f ax , it i s r e co m me n de d that you regularly clean the inside. For normal usage, please respect the following rules: • Never leave the cover open unless req uired.
125 Maintenance Replacing the consumables (toner and drum) To check the remain ing capa cities of the consumables: 86 OK - ADVANCED FCT / CONSUMABLES The toner cartridge and the drum cartridge come with a chip card. After replacin g a consumable item in the printer, you ne ed to inform the terminal about its features.
Maintenance 126 Caution - The fusi ng unit locate d inside the printer may become very hot during operation. Caution - T o avoid injury - do not touch . + 2 - Remove the drum/toner cartridge assembly. In order to prot ect the environment, do not throw away the use d toner cartridge.
127 Maintenance + 4 - Separate the drum cartridge from the toner cartridge. + 5 - Remove the new toner cartridge from its box, holding it firmly in both hands. + 6 - Shake the toner cartridge alternate ly in the directions shown by the arrows in the illustration below.
Maintenance 128 + 7 - Remove the protective plastic st rip from the cartridge as shown below. + 8 - Insert the new toner cartridge in th e drum cartridge until locked in place.
129 Maintenance + 9 - Insert the toner/drum cartridg e in the printer as shown below. + 10 - Close the printer cover pressing it ca refully but firmly until it clicks int o position.
Maintenance 130 + Insert chip card (supplied with the to ner cartridge) into the card reader ensuring that the chip is entered as shown in the drawing below. + The following is displayed on the scanner control panel screen: + Press OK . + Once the chip card has been read, the display shows: + Remove the card.
131 Maintenance Replacing the drum cartridge To replace the drum cartridg e, proceed as shown below: When the display shows: + 1 - Open th e printe r cover.
Maintenance 132 . Caution - The fusing unit located in side and at the bott om of the prin ter may become burning hot when the te rminal ope rates. Avoid to uching it; you could hurt yourself. + 3 - Unlock the toner cartridge by turning the blue locking clip in the direction shown in the illustration below.
133 Maintenance + 4 - Separate the drum cartridge from the toner cartridge. + 5 - Remove the new drum cartridge from its box, holding it firmly in both hands.
Maintenance 134 + 6 - Insert the toner cartridge in the drum cart ridge until locked in place. + 7 - Insert the toner/drum cartridg e in the printer as shown below. + 8 - Close the printer cover pressing it ca refully but firmly until it clicks into position.
135 Maintenance + Press the OK key on the scanner control panel. The display shows: + Insert the gauge card (supplied with th e drum cartridge) into the card reade r ensuring that the chip is entered as shown in the drawing below. + The following is displayed on the scanner control panel screen: + Press OK .
Maintenance 136 Cleaning Cleaning the scanner’s reading devices When one or more vert ical lines appe ar on transmitt ed copies or faxes, follow these steps : Cleaning the printer Dust, dirt and paper debris on t he outer su rfaces and inside the pr inter can interfer e with printer perf ormance.
137 Maintenance Cleaning the outside of the printer Clean the outside of the pr inter with a smooth duster. Cleaning the paper feed roller + 1 - Turn off the printer an d unplug the power cord. + 2 - Remove the drum/toner cartridge set from the terminal.
Maintenance 138 Servicing For guaran teed perfo rmance of you r terminal, some maintenance work (replacing the fusing unit and the transfer roll) has to be done on the printer approximatly ev ery 50,000 printed pages. Please contact your supplier for this operation.
139 Maintenance document composed of se veral pages, the transmission will take place from the page where the error oc curred • abandoning the transmission by deleting th e corr esponding command in the transmission line (refer to parag rap h Deleting a transmission on hold , page -86).
Maintenance 140 Code 0B - Wrong number of pages There is a differenc e between the number of pages indicated during preparat ion for the transmissi on and the number of pages sent - check the number of pages in the document.
141 Maintenance Code 1B - Transmission fa iled During transmissi on: start again. During r eception: ask your subscribe r to resen d the do cument. Internet codes Codes 40 and 41 - No reply fr om supplier The modem cannot connect to the Internet service provider.
Maintenance 142 Code 50 - Server er ror Check the number of the parametr ed SMS or an error occured when data were configured. Printer errors Error messages If the printe r has one of the pro blems described below, the signal "On" flashes red, and you can’t us e yo ur terminal temporarily.
143 Maintenance PAPER JAM EXTERNAL TRAY Open the cover. Remove the jammed sheet from the print outlet. PAPER JAM INTERNAL TRAY Open the cover. Remove the jamme d sheet from between the tray and the fusing unit. PRINTER ERROR XX Disconnect and reconn ect the terminal.
Maintenance 144 Printer paper jam Inside the pri nter + Use the following procedure to remove any sheets of paper jammed in side the printe r. Caution - The fusing unit inside the printer can become very ho t during operation. To avoid injury - do not touch.
145 Maintenance Paper jam at the feeders and trays The figures below show different types of paper jams you might experience when using your termin al.
Maintenance 146 Second cassette (option) 2 1 1 2.
147 Maintenance Scanner incidents Scanner paper jam When a paper jam occurs, the follow ing message appears on the control panel screen REMOVE DOCUMENT . If jams often occur in a specific part of the unit , the latter needs to be checked, cleaned or repaired.
Maintenance 148 Miscellaneous incidents At switch-on nothing a ppears on screen Check that th e power cabl e is plugged in, and check the power plug if necessary. The fax does not detect th e presence of your inse rted document. The message READY does not appe ar on t he screen .
149 Maintenance Terminal packing and transportation Always use the original package when transporting the terminal. Failure to do so could void the warranty. + 1 - Disconnect the terminal from the telephone network (depends on model) and the mains plug.
Maintenance 150 Characteristics Device typ e: Office color fax machin e, fast operation with all Group 3 devices acc ording to ITU-T re commendat ions. Unit characteristics Dimensio ns: Width: 440 mm [17. 32 in.] Depth: 460 mm (without duplex option) [18 in.
151 Maintenance File format: - Image : TIFF- F for black/white document s and JPEG for color docu ments - PDF : monochrome et color - P C L ® 6 Emulation ( A ) SG Script (Po stScript® level 2 la ngu.
Safety 152 S AFETY SAFETY WARNING Before powering on your unit, make sure the power outlet it is con- nected to meets the requirements printed on the warning label on your unit, or on the sep arate power supply (depending o n the model). This unit must not be installed on the floor.
153 Consumables C ONSUMABLES T oner cartridge:52116101 Drum cartridge:56120301 Consumable characteristics Toner cartridge: The standard toner cartridge can produce up to 6,000 pages (when printing on Letter paper with a 5% max. black and white ratio).
154 Service and Suppo rt Service and Support First... Consult the store where yo u purchased y our printer. Additional OKI R esources •Available 24 hours a day, 7 days a week •Visit our multilingual web site: www.OKIPRINTINGSOLUTIONS.COM •Visit MY.
Oki Data Americas, Inc. 2000 Bishops Gate Blvd. , Mt. Laurel, NJ 08054-4620 T el: (856)235-2600 F ax: (856)222-5320 http://okiprinti ngsolutions.com © 2006 Oki Data Americas, Inc.
デバイスOki B4545 MFPの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Oki B4545 MFPをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOki B4545 MFPの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Oki B4545 MFPの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Oki B4545 MFPで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Oki B4545 MFPを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOki B4545 MFPの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Oki B4545 MFPに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOki B4545 MFPデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。