OkiメーカーJET 2500の使用説明書/サービス説明書
ページ先へ移動 of 37
OKIJET 2500 User’ s Guide 2500ugb.p65 02/06/98, 11:32 1.
English 2 OKIJET 2500 Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki assumes no responsibility for the results of errors beyond its control.
English User’s Guide 3 Contents Safety Instructions .................................................................... 4 Control Panel Buttons and Indicators ..................................... 6 Print Head Care .................................
English 4 OKIJET 2500 Safety Instructions Y our Oki printer has been carefully designed to giv e you years of safe, reliable performance. As with all electrical equipment, ho wev er , there are a few basic precautions you should take to avoid hurting yourself or damaging the printer: • Read the setup instructions in this handbook carefully .
English User’s Guide 5 This product complies with the requirements of the Council Directives 89/336/EEC and 73/23/EEC on the approximation of the laws of the member states relating to electromagnetic compatibility and low voltage. • Do not poke anything into the ventilation slots on the printer; you could get a shock or cause a fire.
English 6 OKIJET 2500 Control Panel Buttons and Indicators The control panel has three buttons and six lights (LEDs) that are used to control and display the condition of the printer . Each b utton and LED has multiple functions. The significance of each LED is determined by whether or not the light is lit or if the light is blinking.
English User’s Guide 7 P o wer LED The green Power LED will blink when the printer is processing data. The green Power LED will be ON when the printer is ONLINE and is ready to print. Resume/FF Button Resume Printing: Press and release the Resume/FF button.
English 8 OKIJET 2500 Error LED Recoverable Error (steady light): Press and release the Resume/FF button. Non-Recoverable Error (flashing LED): Refer to the “Troubleshooting” section in this guide. Note: When the red Er r or LED is lit, the printer is in an erro r status condition.
English User’s Guide 9 Print Head Care The OKIJET 2500 requires minimal maintenance. The procedures in this section of the manual describe routine Print Head maintenance and cleaning.
English 10 OKIJET 2500 4. Reinstall the Print Head by aligning the hole in the Print Head with the green post on the Printer Carriage. Lower the Print Head down gently into position. 5. Move the green Cartridge Lock Lever backwards to secure the Colour Print Head.
English User’s Guide 11 Replacing ink cartridges This section explains how to replace an Ink Cartridge without removing the Print Head from the printer . Always use genuine Oki consumables. Some alternatives can cause serious damage and may aff ect your warranty.
English 12 OKIJET 2500 Caution: Do not force fit the Ink Cartridge into the Print Head. 5. Insert the Ink Cartridge into the correct location on the Colour Print Head as shown. The Ink Cartridges and corresponding locations are colour coded and numbered.
English User’s Guide 13 W ARNING! Keep the Ink Cartridges out of the reach of children. Do not get the ink near your eyes or mouth. Caution: D o not touch the uncovered Print Head when removing the Print Head. Ink will get on your hands and the Print Head may become contaminated.
English 14 OKIJET 2500 Selecting Printer Options The purpose of this section is to provide information about how to use the options in the OKIJET 2500 Printer Dri ve r . Accessing printer settings Note: The application may override any options that are selected using the printer dr iv er .
English User’s Guide 15 Spool manager The Spool Manager is a queue for pending print jobs. There are some conditions during which some jobs will not print and will be held in the queue. T o release the documents for printing, perform the following: 1.
English 16 OKIJET 2500 Clearing paper jams If the trailing edge is accessible If the trailing edge of the paper is accessible in the paper tr ay , grasp it, then press the Resume/FF button for two seconds. This will free the paper so that you can pull it out.
English User’s Guide 17 6. Reinstall the Paper T ra y: press in on the Feed Plate and insert the tray into the back of the pr inter , then swing it towards you and press down on the green tabs. 7. Reinstall the Paper Output Shelf. 8. Fan the paper and reinstall it in the Paper T ra y .
English 18 OKIJET 2500 Problem Solving The following charts list some conditions that may occur and the recommended solutions. Follow the suggested solutions until the problem is corrected. If the problem persists, contact your local authorized Oki representative.
English User’s Guide 19 Data is sent but not printed Cause : Printer is not set for local port. Solution : Check the port setting (usually LPT1) for your printer to be sure that it is not being directed either to a remote printer or to print to file.
English 20 OKIJET 2500 Cause : Paper feed er ror has occurred. Solution : If paper has misfed, re mov e the jammed paper . Refer to “Clearing paper misfeeds” in this chapter of the manual for information. Error light flashes Cause : An internal printer fault has occurred.
English User’s Guide 21 Blurry , or ja gged v e rtical lines Cause : Paper prob lem. Solution : Tur n the pa per ov er to print on the other side. Cause : Print Head out of alignment. Solution : • Perform Print Head alignment procedure in the printer driv er .
English 22 OKIJET 2500 Low Ink Indicators blinking Cause : Ink Cartridge empty. Solution : Replace Ink Cartridge. Cause : Wrong brand of Ink Cartridge installed. Solution : Replace Ink Cartridge with Oki Ink Cartridge. Cause : Ink Cartridge not installed correctly.
English User’s Guide 23 Selecting plain paper and media Most types of paper will w ork well in your printer , although some variations in paper composition may af f ect print quality . Most high- grade photocopying papers produce good results. The majority of cotton bond papers also yield excellent results.
English 24 OKIJET 2500 Envelope size Most types of en velopes will w ork well in your printer , although some variations in paper composition may affect pr int quality . En velopes should be tested before lar ge quantities are purchased. Selecting labels Use only paper face label stock.
English User’s Guide 25 Each of the jets is constructed with a heater , a supply of ink in the jet and an opening where the ink is expelled. W hen a command is sent to the ink cartridge to place a drop of ink on the media, the heater switches on and heats the ink until the ink expands into a b ubble.
English 26 OKIJET 2500 Printer Specifications Product type Colour thermal ink jet printer Print speed Monochrome Up to 5 ppm (draft mode) Colour Up to 2.
English User’s Guide 27 DOS character sets HP PC-8, HP R OMAN-8, PC-8 Dan/ Nor (ISO 21), PC-850, ECMA-94, Latin 1(ISO 8859/1), German (ISO 21), French (ISO 69), Italian (ISO 15), Spain (ISO 17), Swe.
English 28 OKIJET 2500 Printable area P aper T ray P aper T ray (Recommended) (Possible) A 5.0mm 5.0mm B 5.0mm 5.0mm C 5.0mm 5.0mm D 18.0mm 12.7mm A C B D W arranty In f ormation For warranty information for your OKIJET 2500 Ink Jet Printer contact your local Oki Dealer or representative.
English User’s Guide 29 Packaging for return to a Service Centre With the original box and packaging: Pack the printer in the original box using the original packing material by reversing the instructions in “Unpacking the printer” in your Setup Guide .
English 30 OKIJET 2500 8. Add enough loose fill to completely surround and cover the printer . Note: The loose fill should be compressed to ensure minimal movement.
English User’s Guide 31 Appendix A Printing on Speciality Media En velopes En velopes should be loaded with the flap f acing the front of the printer (the side to be printed f acing the Paper T ray). Note: F or best r esults use short-flap, side-seam en velopes.
English 32 OKIJET 2500 Other media T ransparencies, sheets of labels, transfer media, etc., are loaded in the same way as you load paper (side to be printed facing the Paper T ray). Note: F or print media specifications, see ‘Selecting and or der- ing supplies’ in this manual.
English User’s Guide 33 Appendix B T ranspor tation Precautions The OKIJET 2500 is not designed to be a portable printer , but it may be easily moved within y our home or building.
English 34 OKIJET 2500 11. Press and release the Cartridge Change/Clean button once more to return the printhead to its home position. 12. W ith your computer switched off, complete the connection to the computer and add paper. Y our printer is now ready for use.
English User’s Guide 35 12. Reinstall the ink cartridges in the printhead and install the printhead in the printer . 13. Press and release the Cartridge Change/Clean button.
English 36 OKIJET 2500 Index C Cartridge Change/Clean Button ............................. 7 Control Panel .......................... 6 buttons ................................ 6 LEDs ................................... 6 E En v elopes ...............
English User’s Guide 37 Oki Systems Company Oki Systems (UK) Limited 550 Dundee Road Slough T r ading Esta te Slough Berks SL1 4LE T e l : 44 (0) 1753 819819 Fax: 44 (0) 1753 819899 http://www .oki.co.uk Oki Systems (Ireland) Limited The Square Industrial Complex T alla ght Dublin 24 T el: (01) 4598666 Fax: (01) 4598840 http://www .
デバイスOki JET 2500の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Oki JET 2500をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOki JET 2500の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Oki JET 2500の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Oki JET 2500で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Oki JET 2500を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOki JET 2500の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Oki JET 2500に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOki JET 2500デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
