Olympusメーカー227585の使用説明書/サービス説明書
ページ先へ移動 of 73
● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life.
2 EN Contents Contents Step 5 Printing “Direct printing (PictBridge)” (p. 47) “Print Reservations (DPOF)” (p. 50) Step 4 How to Use the Camera “Camera Settings” (p. 3) Step 3 Shooting and Playing Back Images “Shooting, Playback, and Erasing” (p.
3 EN Camera Settings Using the Direct Buttons Using the Direct Buttons Frequently used functions can be accessed using the direct buttons. Shutter button (p. 15, 52) Zoom buttons (p. 17, 19) q button (switching between shooting and playback) (p. 16, 18, 42) m button (p.
4 EN Using the Menu Using the Menu Use the menu to change camera settings such as the shooting mode. Press the m button to display the function menu. The function menu can be used to set frequently used shooting and playback functions such as shooting mode.
5 EN Menu Index Menus for Shooting Functions 1 Shooting mode P (PROGRAM AUTO) ....... p. 15 M (iAUTO) .................... p. 22 s (SCENE MODE) ...... p. 22 P (MAGIC FIL TER) ..... p. 23 p (P ANORAMA) ............... p. 24 Q (BEAUTY) ................ p.
6 EN Names of P ar ts 1 Connector cover ..................... p. 1 1, 12 2 Multi-connector ........... p. 1 1, 12, 45, 47 3 Strap eyelet .................................... p. 7 4 Flash ............................................ p. 27 5 Battery/card compartment cover .
7 EN 4 5 9 10 8 7 6 2 3 1 1 Shutter button ......................... p. 15, 52 2 n button ........................ p. 13, 15 3 Zoom buttons ......................... p. 17, 19 4 Monitor ......................... p. 8, 15, 44, 52 5 m button ...........
8 EN Monitor Shooting mode display Still image Movie 1/100 F3.0 1/100 F3.0 P P 14 M 4 4 N ORM P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 00:34 00:34 ON ON 0.0 0.0 AUTO WB AUTO WB VGA 1 2 3 4 5 6 7 8 9 11 15 16 17 18 14 13 12 19 23 24 20 21 22 1 2 4 5 6 7 11 10 14 15 17 18 12 13 16 19 21 1 Battery check .
9 EN Playback mode display Standard display 10 10 ’10/02/26 12:30 ’10/02/26 12 :30 4/30 4/30 00:1 2/ 00:34 00:12/ 00:34 1 6 5 4 3 2 17 1 6 Still image Movie Advanced display 10 10 4/30 4/30 1/1000 F3.0 2.0 AUTO WB AUTO ISO P N ORM 14 M FILE 100 0004 ’10/02/26 12 :30 1/1000 F3.
10 EN Preparing the Camer a Insert the battery by putting in the ▼ marked side fi rst, with the C marks toward the battery lock knob. Damage to the battery exterior (scratches, etc.) may produce heat or an explosion. Insert the battery while sliding the battery lock knob in the direction of the arrow .
11 EN Do not insert SD/SDHC memory cards before the camera setup. Do not format the internal memory until the camera setup is complete. Doing so will erase the camera instruction manual and the PC software (ib) data that are stored on the internal memory .
12 EN Charging the batter y with the included USB-A C adapter The included USB-AC adapter (F-2AC) (hereafter referred as AC adapter) has been designed to be used for charging and playback. Make sure that shooting is not being used while the AC adapter is connected to the camera.
13 EN Setting the date, time and time zone The date and time set here are saved to image fi le names, date prints, and other data. 1 Press the n button to turn on the camera. The date and time setting screen is displayed when the date and time are not set.
14 EN Changing the display language The language for the menu and error messages displayed on the monitor is adjustable. 1 Display the [SETUP] menu. “Using the Menu” (p.
15 EN Shooting, Playback, and Erasing 2 Hold the camera and compose the shot. Horizontal grip V ertical grip Monitor When holding the camera, take care not to cover the fl ash with your fi ngers, etc. 3 Press the shutter button halfway down to focus on the subject.
16 EN 4 T o take the picture, gently press the shutter button all the way down while being careful not to shake the camera. P P 1/400 1/400 F3.0 F3.0 Image review screen Press fully T o view images during shooting Pressing the q button enables playback of images.
17 EN Using the zoom Pressing the zoom buttons adjusts the shooting range. Pressing the wide (W) button Pressing the telephoto (T) button 14 M 4 44 4 P P 0.
18 EN T o play back movies Select a movie, and press the A button. ’10/02/26 12:30 ’10/02/26 12 :30 4/30 4/30 OK MOVIE PLAY MOVIE PLAY Movie Operations during movie playback 00:1 2/ 00:34 00:12/ 00:34 During playback Elapsed time/ T otal recording time Pausing and restarting playback Press the A button to pause playback.
19 EN Operations while playback is paused During pause 00:1 4/ 00:34 00:14/ 00:34 Cueing Use F to display the fi rst frame and press G to display the last frame. Advancing and rewinding one frame at a time *1 Turn the wheel controller to advance or rewind by one frame at a time.
20 EN T o select an image in index view Use FGHI to select an image, and press the A button to display the selected image in single-image view . T o scroll an image in close-up view Use FGHI to move the viewing area. T o select an image in event index Use HI to select the representative image and press the A button.
21 EN Using the menu guide If the E button is pressed while settings are being adjusted in the playback function or [SETUP] menus, a description of the selected option is displayed. “Using the Menu” (p. 4) Using the camera guide Use the camera guide to look up camera operations.
22 EN Using Shooting Modes Using the best mode for the shooting scene ( s mode) 1 Set the shooting mode to s . 14 M 4 4 SCENE MODE SCENE MODE 0.0 0.0 AUTO WB AUTO WB 2 Press G to go to the submenu. 14 M 4 4 0.0 0.0 AUTO WB AUTO WB PORTRAIT PORTRAIT 3 Use HI to select the mode and then press the A button to set.
23 EN In s modes, the optimum shooting settings are pre-programmed for speci fi c shooting scenes. For this reason, settings may not be changed in some modes.
24 EN Creating panoramic ima ges ( p mode) 1 Set the shooting mode to p . PANORAMA PANORAMA 0.0 0.0 AUTO WB AUTO WB AUTO AUTO 14 M 4 4 2 Press G to go to the submenu. 3 Use HI to select the desired mode and then press the A button to set. Submenu 1 Application AUTO Three frames are taken and combined by the camera.
25 EN T aking pictures with [MANUAL] 1 Use HI to specify at which edge the next picture is to be connected. MANUAL MANUAL 1 2 12 MENU BACK Direction for combining the next frame 2 Press the shutter button to take the fi rst frame.
26 EN Smoothing out skin tone and texture ( Q mode) The camera identi fi es a person’s face and gives the skin a smooth, translucent look for taking the picture. 1 Set the shooting mode to Q . 14 M 4 4 0.0 0.0 AUTO WB AUTO WB BEAUTY BEAUTY P P 2 Point the camera toward the subject.
27 EN Using Shooting Functions Shooting closeups (Macro shooting) This function enables the camera to focus and shoot subjects at close distances. 1 Select the macro option in the shooting function menu. 14 M 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO OFF OFF 2 Use HI to select the setting option, and press the A button to set.
28 EN Using the self-timer After the shutter button is pressed all the way down, the picture is taken after a short delay . 1 Select the self-timer option in the shooting function menu. 14 M 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO OFF 12 12 2 2 OFF 2 Use HI to select the setting option, and press the A button to set.
29 EN 2 Use HI to select the setting option, and press the A button to set. Option Description WB AUTO The camera automatically adjusts the white balance according to the shooting scene. 5 For shooting outdoors under a clear sky . 3 For shooting outdoors under a cloudy sky .
30 EN Sequential shooting (Drive) Pictures are taken sequentially while the shutter button is held down. 1 Select the drive option in the shooting function menu. 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO P P SEQUENTIAL SEQUENTIAL Option Description o One frame is shot each time the shutter button is pressed.
31 EN For information on using the menus, see “Using the Menu” (p. 4). Menus for Shooting Functions The default settings of the function are highlighted in .
32 EN Brightening the subject against backlight [SHADOW ADJUST] I (Shooting menu 1) X SHADOW ADJUST Available shooting modes: P M s P p Q Submenu 2 Application AUTO The shadow adjustment effect is applied when shooting against backlight. OFF The effect is not applied.
33 EN For information on using the menus, see “Using the Menu” (p. 4). Shooting at higher magni fi cations than optical zoom without reducing the image quality [FINE ZOOM] I (Shooting menu 1) X FINE ZOOM Available shooting modes: P M s P p Q Submenu 2 Application OFF Optical zoom is used to zoom in for shooting.
34 EN Reducing the blur caused by the camera shake when shooting [IMAGE ST ABILIZER] (still images)/ [IS MOVIE MODE] (movies) I (Shooting menu 1) X IMAGE ST ABILIZER (still images)/ A (Movie menu) X IS MOVIE MODE (movies) Available shooting modes: P M s P p A Q Submenu 2 Application OFF The image stabilizer is deactivated.
35 EN For information on using the menus, see “Using the Menu” (p. 4). Menus for Playbac k, Editing, and Printing Functions The default settings of the function are highlighted in . Data must have been created with the PC software (ib) before using some function.
36 EN Viewing images by event [EVENT q ] EVENT q In [EVENT q ], images in an event are played back. (Images with the same shooting date are grouped into the same event.
37 EN For information on using the menus, see “Using the Menu” (p. 4). Retouching the skin and eyes [BEAUTY FIX] BEAUTY FIX Depending on the picture, the editing may not be effective. Submenu 1 Submenu 2 Application ALL ― [CLEAR SKIN], [SP ARKLE EYE] and [DRAMA TIC EYE] are applied together .
38 EN Changing the color tone of image [COLOR EDIT] EDIT X COLOR EDIT Submenu 2 Application BLACK & WHITE This changes the image to black and white. SEPIA This changes the image to a sepia tone. HIGH SA TURA TION This increases the color saturation of the image.
39 EN For information on using the menus, see “Using the Menu” (p. 4). Erasing images [ERASE] ERASE Submenu 1 Application ALL ERASE All images in the internal memory or card will be erased. SEL. IMAGE Images are individually selected and erased. ERASE/ ERASE EVENT *1 Deletes the image displayed.
40 EN Rotating images [ y ] q (Playback menu) X y 1 Use HI to select an image. 2 Press the A button to rotate the image. 3 If necessary , repeat Steps 1 and 2 to make settings for other images, and press the m button. The new picture orientations will be saved even after the power is turned off.
41 EN For information on using the menus, see “Using the Menu” (p. 4). The default settings of the function are highlighted in . Restoring data in the camera [DA T A REP AIR] r (Settings 1) X DA T A REP AIR Playback will become available by performing [DA T A REP AIR] when images never appear on the monitor after q button is pressed.
42 EN Restoring the shooting functions to the default settings [RESET] r (Settings 1) X RESET Submenu 2 Application YES Restores the following menu functions to the default settings. Flash (p. 27) Macro (p. 27) Self-timer (p. 28) Exposure compensation (p.
43 EN For information on using the menus, see “Using the Menu” (p. 4). Selecting the camera sound and its volume [SOUND SETTINGS] s (Settings 2) X SOUND SETTINGS Submenu 2 Submenu 3 Submenu 4 Appl.
44 EN Adjusting the CCD and the image processing function [PIXEL MAPPING] s (Settings 2) X PIXEL MAPPING This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended.
45 EN For information on using the menus, see “Using the Menu” (p. 4). Choosing home and alternate time zones [WORLD TIME] t (Settings 3) X WORLD TIME Y ou will not be able to select a time zone using [WORLD TIME] if the camera clock has not fi rst been set using [ X ].
46 EN 3 Turn on the TV , and change “INPUT” to “VIDEO (an input jack connected to the camera).” For details on changing the input source of the TV , refer to the TV’s instruction manual. 4 Press the q button, and use HI to select the image for playback.
47 EN Printing 2 T urn on the printer, and then connect the printer and camera. I button USB cable (supplied) Multi-connector OK CUSTOM PRINT EASYPRINT START 3 Press I to start printing. 4 T o print another image, use HI to select an image, and press the A button.
48 EN Changing the printer’s settings for printing [CUST OM PRINT] 1 Follow Steps 1 and 2 for [EASY PRINT] (p. 47). 2 Press the A button. 3 Use FG to select the print mode, and press the A button.
49 EN Submenu 5 Submenu 6 Application < × 0 to 10 This selects the number of prints. DA TE WITH/ WITHOUT Selecting [WITH] prints the images with the date. Selecting [WITHOUT] prints the images without the date. FILE NAME WITH/ WITHOUT Selecting [WITH] prints the fi le name on the image.
50 EN 11 Press the m button. 12 When the message [REMOVE USB CABLE] is displayed, disconnect the USB cable from the camera and printer . Print Reser vations (DPOF *1 ) In print reservations, the number of prints and date imprint option are saved in the image on the card.
51 EN Reser ving one print each of all images on the car d [ U ] 1 Follow Steps 1 and 2 in [ < ] (p. 50). 2 Use FG to select [ U ], and press the A button. 3 Follow Steps 5 and 6 in [ < ]. Resetting all print reser vation data 1 Follow Steps 1 and 2 in [ < ] (p.
52 EN Usage Tips If the camera does not work as intended, or if an error message is displayed on the screen, and you are unsure of what to do, refer to the information below to fi x the problem(s). T roubleshooting Battery “The camera does not work even when batteries are installed”.
53 EN Er ror messa ge When one of the messages below is displayed on the monitor , check the corrective action. Error message Corrective action CARD ERROR Card problem Insert a new card. WRITE PROTECT Card problem The card write-protect switch is set to the “LOCK” side.
54 EN Shooting tips When you are unsure of how to take a picture that you envision, refer to the information below . Focusing “Focusing on the subject” T aking a picture of a subject not in the center of the screen After focusing on an object at the same distance as the subject, compose the shot, and take the picture.
55 EN Exposure (brightness) “T aking pictures with the right brightness” T aking pictures of a subject against a backlight Faces or backgrounds are bright even when shot against backlight. [SHADOW ADJUST] (p. 32) T aking pictures using [F ACE/iESP] (p.
56 EN Playback/Editing tips Playback “Playing images in the internal memory and card” Remove the card and display the images in internal memory “Inserting the battery” (p. 10), “Inserting the SD/SDHC memory card (sold separately)” (p. 14) Selecting a storage device [INTERNAL/SD] (p.
57 EN Appendix Batter y , USB-A C adapter (included), Charger (sold separately) This camera uses one Olympus lithium ion battery (LI-42B/LI-40B). No other type of batteries can be used. Caution: There is a risk of explosion if the battery is replaced with the incorrect battery type.
58 EN Do not connect the included USB-AC adapter (F-2AC) to equipment other than this camera. For plug-in type USB-AC adapter: The included USB-AC adapter (F-2AC) is intended to be correctly orientated in a vertical or fl oor mount position.
59 EN Using a new card Cards must be formatted with this camera before fi rst use or after being used with other cameras or computers. [MEMORY FORMA T]/[FORMA T] (p. 41) Checking the image saving location The memory indicator shows whether the internal memory or card is being used during shooting and playback.
60 EN Number of storable pictures (still images)/Continuous recording length (movies) in the internal memory and SD/SDHC memory cards The fi gures in the following tables are quoted only as a rough guideline.
61 EN SAFETY PRECA UTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE.
62 EN Handle the camera with care to avoid getting a low-temperature burn. When the camera contains metal parts, overheating can result in a low-temperature burn. Pay attention to the following: When used for a long period, the camera will get hot. If you hold on to the camera in this state, a low-temperature burn may be caused.
63 EN Battery Handling Precautions This camera uses a lithium ion battery speci fi ed by Olympus. Do not use any other type of battery . If the battery’s terminals get wet or greasy , camera contact failure may result. Wipe the battery well with a dry cloth before use.
64 EN FCC Notice Radio and T elevision Interference Changes or modi fi cations not expressly approved by the manufacturer may void the user’s authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
65 EN Representative plug of power supply cord of countries/regions around the world A Type (American T ype) B T ype (British T ype) BF T ype (British T ype) B3 T ype (British T ype) C T ype (CEE T ype) SE T ype (CEE T ype) O T ype (Oceania T ype) The representative supply voltage and plug type are described in this chart.
66 EN For customers in North and South America For customers in USA Declaration of Conformity Model Number : STYLUS-7030/ μ -7030 Trade Name : OL YMPUS Responsible Party : Address : 3500 Corporate Parkway , P .O. Box 610, Center V alley , P A 18034-0610, U.
67 EN CONDITON OF THE PRODUCTS (OR ANY P ART THEREOF) OR THE MERCHANT ABILITY OF THE PRODUCTS OR THEIR FITNESS FOR A P ARTICULAR PURPOSE, OR RELA TING TO THE INFRINGEMENT OF ANY P A TENT , COPYRIGHT , OR OTHER PROPRIET ARY RIGHT USED OR INCLUDED THEREIN.
68 EN For customers in Europe “CE” mark indicates that this product complies with the European requirements for safety , health, environment and customer protection.
69 EN Notes regarding Guarantee maintenance 1 This Guarantee will only be valid if the Guarantee Certi fi cate is duly completed by Olympus or an authorized dealer or other documents contain suf fi cient proof.
70 EN Disclaimer of W arranty Olympus makes no representations or warranties, either expressed or implied, by or concerning any content if these written materials or software, and in no event shall be.
71 EN SPECIFICA TIONS Camera Product type : Digital camera (for shooting and displaying) Recording system Still pictures : Digital recording, JPEG (in accordance with Design rule for Camera File system (DCF)) Applicable standards : Exif 2.
72 EN Lithium ion battery (LI-42B) Product type : Lithium ion rechargeable battery Standard voltage : DC 3.7 V Standard capacity : 740 mAh Battery life : Approx.
VN684801.
デバイスOlympus 227585の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Olympus 227585をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOlympus 227585の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Olympus 227585の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Olympus 227585で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Olympus 227585を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOlympus 227585の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Olympus 227585に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOlympus 227585デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。