Oregon ScientificメーカーMSR939Aの使用説明書/サービス説明書
ページ先へ移動 of 26
POLERMO Projection Clock with Motion Alert Model: RMR939P A / MSR939A USER MANUAL RMR939PA English Cover R5 9/21/04, 2:40 PM 1.
EN 1 CONTENTS Introduction .............................................................. 2 Product Overview .................................................... 3 Front View .............................................................. 3 Back View .
EN 2 INTRODUCTION Thank you for selecting the Oregon Scientific TM POLERMO Projection Clock with Motion Alert. This device is designed to give you many years of reliable service, including the followi.
EN 3 1 2 3 5 4 8 7 6 1. SOUND / SLEEP button • Press to turn the soothing sound ON. • Press to wrap around the sleep timer setting as follows: 0 120 90 60 30 15 0 minutes. • Press and hold for 2 seconds to choose 1 of 6 soothing sounds. 2. SNOOZE / LIGHT button • Press to activate the 8-minute snooze function.
EN 4 • Press and hold for 2 seconds to enter: - Motion Sensor Code. - Motion Alarm Setting Mode for motion alarm period and alarm type. 6. Projector Projects time and alarm status. 7. CLOCK button • Press to toggle between the following display modes: - Clock with seconds and calendar .
EN 5 1 2 3 4 5 6 7 8 1. Projector FOCUS knob • T wist to focus the projected image. 2. Projector IMAGE ROT A TION knob • T wist to get the best viewing angle of the projected image. 3. PROJECTION ON switch • Slide to ON for continuous image projection when the AC power is connected.
EN 6 LCD DISPLA Y 1. SOUND • Appears when the sleep function is activated. 2. Battery Low icon • Appears when the clock batteries are low or , no batteries are installed and only the AC adaptor is connected. 3. Time • HH / MM, 12- / 24-Hour , AM / PM.
EN 7 10. MIN • Appears when the sleep function is activated. 11 . Time Zone Hour Offset / Day of the Week • Offsets the atomic clock time setting when you are in a different time zone (+ / -23 hours). • Name of day available in 1 of 5 languages.
EN 8 REMOTE MOTION SENSOR ( MSR939A ) - FRONT VIEW 1. Rotary Motion Sensor • Detects motion and activates both alarms on the remote motion sensor and main clock units in accordance with the settings used. • T wist the knob to direct the sensor to the position you want.
EN 9 REMOTE MOTION SENSOR ( MSR939A ) - BACK VIEW 1. W all Mount 2. Battery Compartment (cover on) • Uses 3 x UM-3 / AA 1.5V batteries. 3. CHANNEL 1 / 2 • Slide to select either Channel 1 or Channel 2. 4. CODE switch • Slide to change the Code. 5.
EN 10 • Keep your product away from hot, humid conditions or strong sunlight. • Every effort has been made to ensure the highest standards of reliability for your clock with remote motion sensor . However, if something does go wrong, please do not try to repair it yourself - consult your supplier .
EN 11 BA TTERIES The clock uses: • 4 x UM-3 / AA 1.5V batteries. The motion sensor uses: • 3 x UM-3 / AA 1.5V batteries. The optional wake-up vibration alarm VR101A (not included in the package) uses: • 2 x UM-3 / AA 1.5V batteries. It is recommended that you use alkaline batteries with this product for longer performance.
EN 12 shows on the clock display when batteries are low or when there are no batteries installed and only the adaptor is connected. The LED indicator on the motion sensor and vibration alarm will flash in red when the batteries are low . AC ADAPTOR The clock / projector and the motion sensor use 6V and 4.
EN 13 For best results, place the clock away from metal or electrical objects, and near a window with a clear view to the sky . TURNING THE A TOMIC CLOCK SIGNAL ON / OFF T o turn the atomic clock signal reception ON: • Press and hold the button for 2 seconds.
EN 14 SETTING THE CLOCK / CALENDAR Before you can manually set the clock and calendar, you must specify the current time zone you live in and the time format (12- or 24-hour) as follows: 1. Press and hold the CLOCK button for 2 seconds. The time zone offset hour digits will flash.
EN 15 Alarm 1 (Melody) Alarm 2 Disabled Alarm 2 (W ake-Up) Alarm 2 Melody + W ake-Up SETTING THE ALARM(S) 1. Press and hold CLOCK ALARM for 2 seconds to enter the Alarm Setting Mode. 2 . Alarm 1 will start flashing. Use the and buttons to toggle between alarm 1 and 2.
EN 16 If no button is pressed, the alarm will automatically silence after 2 minutes. It will then sound again in 24 hours. MOTION ALARM MOTION ALARM SETTING DISPLA Y The motion sensor icon indicates the motion alarm setting.
EN 17 Press CLOCK or CLOCK ALARM at any time to exit the Motion Alarm Setting Mode. TURNING THE MOTION ALARM OFF Press any button on the clock to turn the motion alarm off. It will sound again when the remote motion sensor unit detects a motion again.
EN 18 2. Use the or buttons to change the type of soothing sound. 3. Press the SOUND / SLEEP button to confirm the setting. PROJECTION UNIT The projection unit can display both time and alarm status. T o use this feature: • Slide the PROJECTION switch to ON to activate continuous projection.
EN 19 5. Press the RESET button. Close the motion sensor battery compartment. 6. Secure the sensor in the desired location using the wall mount or table stand. 7. T wist the motion sensor knob to direct the sensor to the position you want. 8. Slide the POWER ON / OFF switch to turn the motion sensor ON or OFF .
EN 20 The default settings are: Clock Time: 12.00 PM Date: 1 st January 2004 Time Offset: -8 (Pacific T ime) Alarm 1 and 2 Time: 6.00 AM Alarm Melody: #1 with low volume Daily Alarms: Disabled Motion Alarm Start Time: 12.00 AM Motion Alarm Stop Time: 6.
EN 21 PROBLEM SYMPTOM REMEDY Operation not normal. Certain functions do not perform. Reset the clock and the motion sensor . Calendar . Strange day . Check it is set to your own language. Clock. Cannot change clock. Disable the atomic clock signal and set manually .
EN 22 TYPE DESCRIPTION T emperature Unit ° F / ° C Operating Range 32 ° F to +122 ° F (0 ° C to +50 ° C) Main Unit Atomic Frequency Atomic Clock Frequency System WWVB60 Synchronization Auto or disabled Indoor Range 23 ° F to +122 ° F (-5 ° C to +50 ° C) Resolution 0.
EN 23 NOTICES ST A TEMENT OF RESPONSIBILITY Oregon Scientific will not be held liable for any bodily injury , death, property damages, or any other claims of whatever nature resulting from the misuse or negligence of the product, whether intentional or unintentional.
EN 24 FCC ST A TEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
© 2004 Oregon Scientific. All rights reserved. P/N: 000-000000-000 RMR939PA English Back R5 9/21/04, 2:40 PM 1.
デバイスOregon Scientific MSR939Aの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Oregon Scientific MSR939Aをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOregon Scientific MSR939Aの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Oregon Scientific MSR939Aの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Oregon Scientific MSR939Aで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Oregon Scientific MSR939Aを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOregon Scientific MSR939Aの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Oregon Scientific MSR939Aに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOregon Scientific MSR939Aデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。