Oregon ScientificメーカーRMR603HGAの使用説明書/サービス説明書
ページ先へ移動 of 17
W ireless Thermo-Hygro Clock Model : RMR603HGA User Manual RMR603HGA lab test cover R2 1/14/04, 1:31 AM 1.
EN 1 CONTENTS Contents ................................................................... 1 Introduction .............................................................. 2 About Oregon Scientific .......................................... 2 Product Overview .
EN 2 INTRODUCTION Thank you for selecting the Oregon Scientific TM Wireless Thermo-Hygro Clock (RMR603HGA). This device bundles precise time keeping, alarm, and temperature and humidity monitoring features into a single tool you can use from the convenience of your home.
EN 3 PRODUCT OVERVIEW FRONT VIEW 1. SNOOZE / LIGHT : Press to activate backlight or snooze. 2. T emperature Area: Readings, trend line, sensor reception status and channel number 3.
EN 4 BACK VIEW 1. W all mount 2. Battery compartment 3. ° C / ° F switch 4. ZONE: Press to switch time zones, deactivate Atomic Clock signal reception 5.
EN 5 REMOTE SENSOR (THGR122NX) 1. LCD display 2. LED Status indicator 1 2 1 2 3 4 1. W all mount hole 2. RESET 3. Channel number (1 - 3) 4. Battery compartment (Battery compartment cover not shown) RM.
EN 6 CHANGE SETTINGS 1. Press and hold MODE for 2 seconds to enter setting mode. 2. Press UP or DOWN to change settings. 3. Press MODE to confirm. T ABLE ST AND OR W ALL MOUNT Insert the stand on the back of the product, or mount it on a wall with a nail.
EN 7 3. Place the sensor near the main unit. Press RESET on the sensor to initiate signal sending between the sensor and the main unit. The reception icon on the main unit will blink for approximately 3 minutes while it is searching for the sensor . (Refer to the Sensor Data T ransmission section for more information.
EN 8 SEARCH FOR SENSOR To search for a sensor , press and hold MEM and CHANNEL for 2 seconds. If the sensor is still not found, check the batteries, obstructions, and remote unit location. Signals from household devices such as doorbells, electronic garage doors, and home security systems may cause temporary reception failure.
EN 9 TURN A TOMIC CLOCK ON/OFF Perform this step if you cannot receive Atomic Clock signals. Press and hold ZONE for 2 seconds. Then, manually set the clock following the "Set Clock" instructions (below).
EN 10 ACTIV A TE ALARM Press ((.)) to activate or deactivate the Alarm. shows in the Clock Area when the Alarm is activated. SNOOZE ALARM Press SNOOZE/LIGHT to silence the Alarm for 8 minutes. If no button is pressed, the Alarm will automatically silence after 2 minutes.
EN 11 If you use a sensor that collects only temperature data, humidity will not be shown. MINIMUM / MAXIMUM RECORDS Press MEM to toggle between current, maximum (MAX) and minimum (MIN) records for the selected sensor . T o clear the records, press and hold MEM for 2 seconds.
EN 12 W ARNINGS This product is designed to give you years of service if handled properly . Observe the following guidelines: • Never immerse the product in water . This can cause electrical shock and damage the product. • Do not subject the main unit to extreme force, shock, or fluctuations in temperature or humidity .
EN 13 SPECIFICA TIONS MAIN UNIT DIMENSIONS L x W x H1 16 x 125 x 57 mm (4.57 x 4.92 x 2.24 inches) We ight 7.90 ounces with battery REMOTE SENSOR DIMENSIONS L x W x H 92 x 60 x 20 mm (3.
EN 14 FCC ST A TEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
EN 15 DECLARA TION OF CONFORMITY The information below is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www .oregonscientific.com, or on the warranty card for this product) for all inquiries instead.
© 2004 Oregon Scientific. All rights reserved. P/N.: 086-003347-01 RMR603HGA lab test back cover 12/29/03, 10:29 PM 1.
デバイスOregon Scientific RMR603HGAの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Oregon Scientific RMR603HGAをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOregon Scientific RMR603HGAの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Oregon Scientific RMR603HGAの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Oregon Scientific RMR603HGAで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Oregon Scientific RMR603HGAを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOregon Scientific RMR603HGAの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Oregon Scientific RMR603HGAに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOregon Scientific RMR603HGAデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。