Oregon ScientificメーカーRMR613HGAの使用説明書/サービス説明書
ページ先へ移動 of 17
W ireless Thermo-Hygro Clock Model : RMR613HGA User Manual RMR613HGA lab test cover R 2 1/8/04, 7:02 PM 1.
EN 1 CONTENTS Contents ................................................................... 1 Introduction .............................................................. 2 About Oregon Scientific .......................................... 2 Product Overview .
EN 2 INTRODUCTION Thank you for selecting the Oregon Scientific TM Wireless Thermo-Hygro Clock (RMR613HGA). This device bundles precise time keeping, dual alarm, and temperature and humidity monitoring features into a single tool you can use from the convenience of your home.
EN 3 PRODUCT OVERVIEW FRONT VIEW 1. Clock / Alarm Area: Date, time, dual alarm; and Atomic Clock reception status 2. T emperature Area: Readings; sensor channel number; remote unit reception and battery status 3. Humidity / Comfort Zone Area: Readings, comfort zone and battery status.
EN 4 BACK VIEW 1. MEM: view current, maximum, and minimum temperature / humidity readings 2. DOWN: decrease setting / deactivate radio- controlled clock / activate or deactivate alarm 3. UP: increase setting / activate radio-controlled clock / activate or deactivate alarm 4.
EN 5 REMOTE SENSOR (THGR122NX) 1. LCD display 2. LED Status indicator 1 2 1 2 3 4 1. W all mount hole 2. RESET 3. Channel number (1 - 3) 4. Battery compartment (Battery compartment cover not shown) RM.
EN 6 CHANGE SETTINGS 1. Press and hold MODE for 2 seconds to enter setting mode. 2. Press UP or DOWN to change settings. 3. Press MODE to confirm. REMOTE SENSOR (THGR122NX) This product is shipped with a THGR122NX Thermo/ Hygro Sensor that collects T emperature and Humidity data.
EN 7 3. Place the sensor near the main unit. Press RESET on the sensor to initiate signal sending between the sensor and the main unit. The reception icon on the main unit will blink for approximately 3 minutes while it is searching for the sensor . (Refer to the Search for Sensor section for more information.
EN 8 SEARCH FOR SENSOR To search for a sensor , press and hold MEM and CHANNEL for 2 seconds. If the sensor is still not found, check the batteries, obstructions, and remote unit location. Signals from household devices such as doorbells, electronic garage doors, and home security systems may cause temporary reception failure.
EN 9 TURN A TOMIC CLOCK ON/OFF Perform this step if you cannot receive Atomic Clock signals. Press and hold DOWN for 2 seconds. Then, manually set the clock following the “Set Clock” instructions (below).
EN 10 ACTIV A TE ALARM Press ALARM to switch to Weekday or Single Alarm view . To activate or deactivate the alarm, press UP or DOWN . • Alarm deactivated: --:-- • Alarm activated: Alarm time is shown The bell icons W and S indicate the alarm display mode selected.
EN 11 To auto-scan between sensors, press and hold CHANNEL for 2 seconds. Each sensor's data will be displayed for 3 seconds. T o end auto-scan, press CHANNEL or MEM . If you use a sensor that collects only temperature data, humidity will not be shown.
EN 12 Do not make any changes or modifications to this product. Unauthorized changes may void your right to use the product. The technical specification of this product and contents of this user guide are subject to change without notice. Images not drawn to scale.
EN 13 Problem Symptom Remedy Data does not match main unit Initiate a manual sensor search ( 8) Cannot change channel Check sensors. Only one sensor is working ( 6) Check batteries ( 6) Check location ( 6) Remote sensor Cannot locate remote sensor SPECIFICA TIONS MAIN UNIT DIMENSIONS L x W x H 123 x 49.
EN 14 Calendar MM/DD; weekday in 5 languages (E, D, F , I, S) Alarm Weekday and Single Alarm; 2- minute crescendo POWER Main unit batteries 2 x UM-3 (AA) 1.5V alkaline Sensor batteries 2 x UM-4 (AAA) 1.5V alkaline FCC ST A TEMENT This device complies with Part 15 of the FCC Rules.
EN 15 DECLARA TION OF CONFORMITY The information below is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www .oregonscientific.com, or on the warranty card for this product) for all inquiries instead.
P/N.: 086-003326-01 © 2004 Oregon Scientific. All rights reserved. RMR613HGA lab test back cover 12/29/03, 10:49 PM 1.
デバイスOregon Scientific RMR613HGAの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Oregon Scientific RMR613HGAをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOregon Scientific RMR613HGAの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Oregon Scientific RMR613HGAの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Oregon Scientific RMR613HGAで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Oregon Scientific RMR613HGAを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOregon Scientific RMR613HGAの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Oregon Scientific RMR613HGAに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOregon Scientific RMR613HGAデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。