OricomメーカーTA2000 Seriesの使用説明書/サービス説明書
ページ先へ移動 of 20
Australia New Zealand Oricom International Pty Ltd Atlas Gentech (NZ) Limited Locked Bag 658 Private Bag 14927 South Windsor , NSW , 2756 Panmure, Auckland Customer Support Customer Support Email: support@oricom.com.au Email: support@atlasgentech.co.nz Web: www .
.
• Avoid exposur e of this telephone to moisture or liquid. • T o prevent electric shock, do not open the handset or base cabinet. • Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and char ging conductors. • Do not use the handset in an explosive hazard ar ea such as where ther e is gas leaking.
me Make sure your base is: • Located within reach of a mains power socket and telephone socket. • At least 1 metre away fr om other electrical appliances, to avoid interference. • Not located in humid or damp conditions, e.g. in a bathroom. 1 Connect the base power lead and the telephone line cord to the back of the base.
only USING YOUR TOUCH PHONE Earpiece/Receiver Display Display with icons and blue backlight. Up/Down Press during a call to incr ease/decrease earpiece volume. During standby use to scroll Up or Down thr ough the menu options and through phonebook and Calls log entries.
touch USING YOUR PHONE 1 T ouch Activated Keypad 1 T o return to standby mode at any time 1 Make a call 1 Preparatory dialling 1 Switch to handsfree/ speakerphone during a call 1 Adjust the call volum.
me 1 Outgoing message (OGM) 12 Record your own ‘Answer and Record’ outgoing message 12 Play/check your OGM 13 Delete your OGM 13 Answering machine menu options 13 Announce Only 13 Ring delay 14 Ti.
only 2 3 If auto-answer is on and the handset is in the base: Lift the handset to answer the call. Y ou do not need to press . Headset connection port The headset has a connection port suitable for 2.5mm stereo jack, on the right-hand side with which to connect a headset (headset not supplied).
touch 4 Navigating the menus Y ou can use the menus to change the settings on your T ouch phone. • T o open the main menu, press . • Press or to scr oll through the menus. • T o return to standby mode at any time, press . • T o return to the previous scr een, press .
me 2 Scroll or to select RINGER VOLUME and press . 3 Scroll or to select EXTERNAL CALL or INTERNAL CALL ringtone volume then press . 4 Scroll or to select the r equired volume and press to confirm. Key tones 1 Press , then scr oll or , or press to select PHONE SETUP and press .
only 8 Y our T ouch answering machine is switched on and ready to use within a few seconds of connecting to the mains power . It has 3 mailboxes with up to 13 minutes recor ding time (shared between the mailboxes) and can stor e up to a maximum of 50 messages.
touch Answering machine day and time Once the day and time has been set, your answering machine will automatically recor d and announce the day and time each message was received. The time and date on the handset is set independently from the answer machine time and date, so they must be set separately .
me mailbox 1/2/3 are deleted” is announced and the phone will return to standby . Record a memo Y ou can recor d a memo in a selected mailbox. It can then be played back, with any other messages, by the mailbox user . 1 With the answer machine keypad active, in standby mode, press .
only 14 15 Ring delay The ring delay is the number of rings after which your answering machine will take an incoming call. Y ou can select from 2, 4, 6, 8 rings or Time Saver mode.
touch touch 16 17 IMPORT ANT TO USE ANY OF THE FEA TURES DESCRIBED IN THIS SECTION YOU MUST FIRST SUBSCRIBE TO THE RELEV ANT SERVICE VIA YOUR NETWORK PROVIDER. Caller ID When you receive an incoming call, the caller's number is displayed so you can see who is calling before you answer .
me me 18 19 Delete an entry/all entries 1 During standby mode, press or to open the calls log. 2 Press or to scr oll to the entry you want. For DELETE ALL , scroll and display any entry . 3 Press , then or to DELETE RECORD or DELETE ALL and press to confirm.
only 20 21 Make internal call 1 Press and scr oll or then press , or enter the handset number directly you want to call. 2 The called handset rings and can press to answer the call. 3 Press to end the call. T ransfer an external call 1 During a call, press .
touch IMPORT ANT This equipment is not designed for making emer gency telephone calls when the power fails. Alternative arrangements should be made for access to emer gency services. SAFETY • The LCD display is made of glass and may break if the handset is dropped.
me 25 NOTES FOR OPERA TION IN NEW ZEALAND The grant of a T elepermit for any item of terminal equipment indicates only that T elecom has accepted that the item complies with the minimum conditions for connection to its network. It indicates no endorsement of the product by T elecom, nor does it provide any sort of warranty .
only 27 26 (a) Oricom warrants that the product is fr ee fr om defects in materials and workmanship for a period of 12 months effective fr om the date of purchase. This warranty in no way affects your statutory warranty under the T rade Practices Act 1974 or any other similar legislation.
デバイスOricom TA2000 Seriesの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Oricom TA2000 Seriesをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOricom TA2000 Seriesの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Oricom TA2000 Seriesの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Oricom TA2000 Seriesで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Oricom TA2000 Seriesを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOricom TA2000 Seriesの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Oricom TA2000 Seriesに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOricom TA2000 Seriesデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。