OricomメーカーUHF050の使用説明書/サービス説明書
ページ先へ移動 of 24
User Guide Oricom UHF050 40 Channel UHF CB Radio.
.
3 T able of contents Important Information 4 Please read before installing or operating your Oricom Radio 4 Safety Warning 5 Controls and Connectors 6 Installation of your Oricom UHF 050 8 Box Content.
4 Important information Please read before installing or operating your Oricom Radio The operation of this radio in Australia and New Zealand is subject to conditions in the following licenses.
5 Important information Safety W arning NOTE: Areas with potentially explosive atmospheres are often, but not always clearly marked. They include fueling areas such as below deck on boats; fuel or che.
Operation 6 Controls and Connectors Front View 60RX CTCSS DCS 1 2 4 1 4 1 3 1 2 1 1 1 0 9 8 7 6 5 3 1. Rotary On / Off Switch and V olume Control 2. LCD Display 3. Rx / Tx Indica tor 4. CTCSS / DCS, 60 Channel Rx Selector s witch 5. Rotary squelch control 6.
Operation 7 Rear View 1 2 3 1. Antenna Connection 2. 3.5mm external jack for optional 8 ohm speaker 3. Power Supply Connection Microphone 1. Push to talk switch (PTT) 2.
8 Installation of your Oricom UHF050 Box Contents 1 X UHF050 CB Radio 1 X Microphone 1 X DC Power cord with inline fuse 1 X Mounting bracket with mounting screws 1 X Microphone hanger 1 X DIN mounting.
9 Installation of your Oricom UHF050 DC P ower The UHF050 is designed for 13.8V DC negative earth installations only . 1. Connect the negative (Black) DC power lead to the vehicle chassis or directly to the vehicle battery negative terminal if preferred.
Operation 10 Operation Dual Function buttons The dual function button (buttons 7 to 13) have two functions. T o use the primar y function (printed on the button) just press the button. T o use the secondary function (printed above the button) press and hold the button for 2 seconds.
Operation 11 T ransmitting NOTE: Before transmitting on any channel, listen to check the channel is not already in use. Busy Channel Lock (BCL) If you turn ON the BCL feature of the UHF050 you will be prevented from accidentally transmitting while the channel is in use.
Operation 12 Call T one A call tone alerts others on your channel that you want to talk. Y our radio has 5 call tones to choose from. T o select a call tone 1. Press and hold SET for 2 seconds. 2. Rotate the Channel button ( or press the Up / Down Select on the Mic) to select the desired Call T one.
Operation 13 2. Rotate the Channel button or press Up / Down Select on the Mic to select the desired DCS channel code. 3. Press the CTCSS / DCS button once to return to standby . Receive & T ransmit Indicator The LED indictor will illuminate green when the unit is receiving a signal, when transmitting it will illuminate red.
Operation 14 The Repeater Access function can be set (from channel 1 to 8) used by local repeater stations. When activated, your radio will receive the Repeater on its specic channel (all repeater outputs are on channel 1 to 8) but transmits to the repeater channel 31 through 38.
Operation 15 Roger Beep (RGB) Roger beep emits a tone when you release the PTT switch. T o turn ON the roger beep 1. Press the RGB button for 2 seconds, the <note icon> a ppears in the display . T o turn OFF the roger beep 1. Press the RGB button for 2 seconds, the <note icon> disa ppears from the display .
Operation 16 T o switch to the primary Channel 1. Press the INS button on the Microphone. BEEP T one (BPT) The Beep T one emits a tone when you press any of the buttons on the Microphone (except the PTT switch) T o T urn ON the BEEP T one 1. Press and hold the BPT button for 2 seconds, BPT a ppears on the LCD display .
Operation 17 Priority Scan In a priority scan the selected priority channel is checked for every 5 memory channels. T o Start a Priority Scan 1. Press the P SC button for 2 seconds, the priority scan will start, P-SC will be displayed on the LCD. T o Stop a Priority Scan 1.
Operation 18 T o program a receive channel. 1. Press and hold the 60Rx button for 2 seconds, the display will sho w channel 41. to select a different channel use the Channel control. 2. Press the PRI button, the 450 in the frequency display will start blinking, use the Channel control to select the desired MHz.
19 Specications Specications Available Tx Channels 38 Power Output 5 Watts CTCSS Sub Channels 38 per channel DCS Codes 104 per channel Receive only channel Range 450MHz to 512Mhz in 12.
20 Specications Frequency T able (Channel 1-20) Channel Frequenc y (MHz) Usage 1 476.425 Duplex RX/Simplex 2 476.45 Duplex RX/Simplex 3 476.475 Duplex RX/Simplex 4 476.5 Duplex RX/Simplex 5 476.525 Emergency 6 476.55 Duplex RX/Simplex 7 476.575 Duplex RX/Simplex 8 476.
21 Specications Frequency T able (Channel 21-40) Channel Frequenc y (MHz) Usage 21 476.925 Simplex 22 476.95 No Use 23 476.975 No Use 24 477 Simplex 25 477.025 Simplex 26 477.05 Simplex 27 477.075 Simplex 28 477.1 Simplex 29 477.125 Simplex 30 477.
22 Warranty and Customer Support W arranty (a) Warranty . Oricom International Pty Ltd (Oricom) warrants that the product is free from defects in materials and workmanship for a period of 36 months effective from the date of purchase.
23 Warranty and Customer Support Customer Support If you feel this product is not working correctly please consult the user guide and ensure that you are using the product in accordance with the instructions.
Australia Oricom International Pty Ltd Locked Bag 658 South Windsor , NSW 2756 Customer Support Email: support@oricom.com.au Web: Australia www .oricom.
デバイスOricom UHF050の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Oricom UHF050をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOricom UHF050の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Oricom UHF050の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Oricom UHF050で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Oricom UHF050を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOricom UHF050の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Oricom UHF050に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOricom UHF050デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。