OricomメーカーW1の使用説明書/サービス説明書
ページ先へ移動 of 22
W1 Series Water resistant DECT Cordless phone Keep this user guide for future reference.
2 Content Pack Cont ents ...................................................................................................... 3 IMPORTANT SAFETY INFORMA TION ............................................................... 4 GETTING STARTED..........
3 OTHER FEAT URES ........................................................................................... 18 Key lo ck .............................................................................................................. 18 Shortcut to turn hands et ringer on/off .
4 IMPORTANT SAFETY INFORMATION • Avoid exposure of this telephone to moisture or liquid. • To prevent electric shock, do not open the handset or base cabinet. • Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and charging conductors.
5 GETTING STARTED Key Lay out ¿ / Ringer On-Off LCD Display Talk / Recall Redial CID / Scroll backward Delete / Mute Program / OK Page # / Keylock / Pause Intercom / Conference Off / Exit Phonebook C.
6 LCD display on the handset The handset is linked to the base Displays the current battery level. It scrolls during charging. Appear together with either handset or base ringer setting. Use to set the handset ringer. Use to set the base ringer. Use to set the recall duration.
7 Basic steps to install This phone is not fully weather-sealed or waterproof. Its special construction provides protection against splashes and dripping water. Any water or liquid exposure other than the above may result in serious damage to the phone.
8 Wall mounting the base and charger 1. Turn the base over. 2. Attach the mounting bracket to the base as indicated. 3. The phone base units are suitable for wall mounting. Use two screws (not supplied) for fixing. Drill two holes horizontally side by side, 64mm apart for main base and 48mm for charger.
9 charge. This is normal. A handset reaching a very low battery voltage level will go into sleep mode, displaying LOW BATT on the screen. It is good practice to replace t he handset on the base unit to charge when it is not in use to ensure t he handset is always fully charged.
10 Making an external call Your phone allows you to dial out a phone number in various ways. Normal dialling 1. Press and wait for the dial tone. 2. Use the number pad to dial the phone number. The display shows the digits as you enter them. 3. When you enter more than 12 digits, turns on.
11 The call timer will be displayed a short while after your call is connected. It shows the duration of the call. This timer is shown in minutes and seconds (MM-SS) in the first hour. After that, it will be shown in hours and minutes (HH-MM) with the “-“blinking to indicate the seconds.
12 During a call, you will hear a loud tone the two loud beeps periodically to notify you of another incoming call. If you wish to answer this call 1. Press listen for dial tone then Press 2 to put the current call on hold and talk with the second caller.
13 2. If there is caller name in the CID record, the first 8 characters are displayed for you to edit. If no caller name is available, you will be prompted to enter a name. 3. Press OK to save the name. You will not be able to save it if this name already exists in the phonebook.
14 3. Press OK to save the name. You will not be able to save it if this name already exists in the phonebook. Edit the name and try again. 4. Edit the number if necessary and press OK to sa ve it. You have saved the number as a phonebook record. This record in the redial list will now show the name t hat you have assigned to this number.
15 6. Press OK to confirm number change. Repeat steps 1 to 6 to edit another record. Deleting a phonebook record 1. During standby mode, press . 2. Press e or f to search for the record that you would like to delete. Or you can use the number keys to jump directly to the record starting with the corresponding letters of that key.
16 6. Press OK to confirm your selection. will turn on if the handset ringer is turned off. Base Ringer Melody & volume 1. Press PROG during standby and press e or f until you see flashing. 2. Press OK to select. 3. Press e or f to listen to and select from the 5 melodies.
17 3. Before you enter the PIN, press and hold on the base for 2 seconds until a registration tone is emitted. The base is now in the registration mode. (If the base is full and cannot take on any more handset, it will emit a reject t one instead. See the section of Deregister to delete a currently registered handset.
18 OTHER FEATURES Key lock Press and hold during standby to lock the keypad. appears whenever keypad is locked. When the keypad is locked, you c an still answer an incoming call by pressing . During the call, the keypad functions as normal. When the call is ended, the keypad will be locked again.
19 MULTI-HANDSET OPERATION You can use these useful features if you have 2 or more handsets registered to the base. Answ ering an internal call When you receive an intercom call, your handset will ring with blinking. You can see the calling handset number on the screen.
20 During the conference call, pressing CONF will put the external line on hold and you can talk to the other handset in private. Press and hold CONF to establish the conference call again. Any handset hangs up during a conference call will leave the other handset still connecting with the external call.
21 NOTES FOR OPERATION IN NEW ZEALAND The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with the minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it pr ovide any sort of warranty.
22 WARRANTY INFORMATION This product is covered by a 12 month warranty against defective workmanship or parts. The warr anty does not extend to damage caused by misuse, negligence, excessive vo ltage, faults on the telephone line or lightning. This guarantee in no way affect s your statutory rights.
デバイスOricom W1の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Oricom W1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOricom W1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Oricom W1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Oricom W1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Oricom W1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOricom W1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Oricom W1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOricom W1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。