PalsonicメーカーPSML-926の使用説明書/サービス説明書
ページ先へ移動 of 20
Instruction manual Mini Component Sound System PSML-926 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.
2 TABLE OF CONTENTS CONTENTS / IMPORTANT SAFEGUARDS ................................................................... PRECAUTIONS AND MAINTENANCE ........................................................................... SPEAKER CONNECTIONS / AUX / PHONO CONNECTION .
Precautions WORTH knowing 3 Please keep the sound system's guarantee card and receipt safe for warranty purposes, if guarantee card is supplied to you. Read carefully through this manual to familiarise yourself with this high - quality sound system.
Remote control and batteries Placing your sound system components INSTALLATION/ CONNECTIONS 4 Optimal stereo position Fit the batteries to match the + and - symbols in the compartment.
Installation INSTALLATION/ CONNECTIONS 5 Plug the provided AM (MW)antenna here. Plug a device like a video recorder, TV set, or minidisc, etc. here. Be sure to connect sockets and plugs of the same colour.
OPEN/ CLOSE The system CONTROLS 6 Place your sound system horizontally on a flat, steady base so that air can circulate around it for ventilation. away from humidify and heat, magnetic fields, such as those from loudspeakers etc., and with no heavy objects placed on top.
The system CONTROLS 7 Press to play TAPE 2 in one direction " " both directions " " or repeatedly " " using MODE button on the machine. To select timer setting and to activate / deactivate timer stand-by. DISPLAY / DEMO : to switch between the system's display and a display demonstration.
The Remote Control Unit CONTROLS 8 The remote control is the principal means of control, but the main functions are also available on the front of the machine. Press the buttons POWER or FUNCTION (TAPE, TUNER, AUX, CD) to turn on the power. Power on / off (stand-by).
With your sound sound system you have unique possibilities to modify the sound of your music The sound CONTROLS 9 On the machine Volume level Volume control both on the system as well as on the remote control.
TUNE TUNE Tuning stations RADIO listening 10 Programming station presets Selecting station presets On the machine select the tuner function and the band by pressing BAND / TUNER button. The other buttons are on the machine too. If you try to store a 31st FM / 16th AM (MW) station, the display will show "FULL".
Continuous playback Winding Playing tapes 11 TAPE 1: To playback prerecorded tapes. TAPE 2: Only to playback prerecorded tapes and to record tapes. For tape recording see page 14-15. button on the machine Select the TAPE 1 or TAPE 2 function. Open either tape compartment to load the tape.
FUNCTION PRESET CLEAR Searching Skipping Playing CDs CD playing 12 To search for a particular point on the disc reverse or forwards. To Skip tracks down / up (if you want, press the button repeatedly). On the machine select the CD function, by pressing the CD button.
PRESET CLEAR RANDOM " ALL RANDOM " " REPEAT " " REPEAT " " REPEAT " Random playback Repeat playback Programmed CD tracks playback 13 Please read remarks about discs on page 19 Select the repeat function, press repeatedly to have .
buttons on the machine Recording stations RECORDING 14 Load a tape with enough free recording time into TAPE 2. Be sure to have the open part of the cassette downwards and the left hand spool fully wound. Close the compartment door again, pushing it softly Select the TUNER function.
Recording from another tape (dubbing) Recording CDs with synchro start RECORDING 15 TAPE 1: Only to playback prerecorded tapes TAPE 2: To playback prerecorded tapes in both directions and to record If the tape is not rewound completely, rewind it first.
Displaying the time Setting the clock (24 hour) CONTROLS 16 Setting the sleep timer FUNCTION Power save mode is activated by power button after clock setting. CLOCK SLEEP SLEEP Switch off your sound system*. Enter clock-set mode, the hour and minute digits flash.
TIMER and clock 17 TIMER Checking the timer Timer (record) stand-by on / off Setting the timer You can set the machine to automatically switch on and off at a specified time. Be sure the clock is set accurately. Select the TIMER function. (Timer display disappears after about 9 seconds.
Before you ask a specialist APPENDIX 18 No sound No Display Noise with radio sound Bad sound with tapes Not recording Not playing CDs Remote control does not work - No mains supply? - Volume at minimum? - Are headphones plugged in the headphone socket? - Did someone press the MUTE button? - The power save mode ? - Replug the AC Cord.
100 watt 87.5MHz - 108MHz 522 - 1620kHz Compact discs APPENDIX 19 Always ... Never ... handle your discs with care. Hold a disc with the fingers touching the edge or the hole. place the disc with the label facing up. place the disc properly into the tray using the proper guide area for 12 cm or 8 cm discs.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888.
デバイスPalsonic PSML-926の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Palsonic PSML-926をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPalsonic PSML-926の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Palsonic PSML-926の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Palsonic PSML-926で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Palsonic PSML-926を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPalsonic PSML-926の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Palsonic PSML-926に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPalsonic PSML-926デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。