PalsonicメーカーTFTV681Uの使用説明書/サービス説明書
ページ先へ移動 of 36
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 68CM C.
T able of Contents Important Information ................................................................................................................................ Important Safety Precautions ....................................................
T able of Contents (continued) Setting Sound ............................................................................................................................................ Customising the Sound ...........................................
Important Information 1 WARNING: TO REDUCE THE RISK OF OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle is.
Important Safety Precautions 2 Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
Important Safety Precautions (continued) 3 13. Carefully move ---When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley.
Important Safety Precautions (continued) 4 22. Power source ---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
Preparations 5 Using the Remote Control Use the remote control by pointing it towards the remote sensor window of the set. Objects between the remote control and sensor window may prevent proper operation. Note: the illustration is for your reference only, the remote sensor may locate differently with different model.
Preparations (continued) 6 INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain.
Identification of Controls 7 Main Unit Power Indicator Remote Sensor 1. POWER Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY. 2. SOURCE To access signal source select menu In OSD Menu, press this button to confirm your setting or operation 3.
Identification of Controls (continued) 8 1. Antenna Input Allows you to connect cable or outdoor antenna 2. AV2 Inputs (Video, Audio L/Mono, R) / S-Video input Receive video/audio signals from external sources such as VCR or DVD player. Receive a S-Video signal from external source such as VCR or DVD player.
Identification of Controls (continued) 9 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. POWER Turn the unit on or off S.S. To select sound output from the main frame or the PIP frame when .
Connections 10 Video cable or VCR Rear of the VCR S-video cable Audio cable Connect a VCR How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR. Note: For better video, you can use the S-Video terminal if your source supports it.
Connections (continued) 1 1 Connect a Camcorder Audio cable Video cable How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder. To playback Camcorder 1. Turn on your LCD, press Source button on the remote control.
Connections (continued) 12 Connect a DVD player DVD player Rear of the DVD player Audio cable Video cable How to connect a DVD Player using Component Video Connections: Connect the Video cable between the Y, Pb/Cb, Pr/Cr input jacks on the unit and Y, Pb, Pr ( or Cb, Cr) output jacks on the DVD player.
Connections (continued) 13 AUDIO VGA VGA IN Y Pr/Cr AUDIO-R Pb/Cb AUDIO-L COMPONENT IN Connect a product to HDMI Product with HDMI jack HDMI cable How to connect: Connect the HDMI cable between the HDMI input jacks on the unit and HDMI output jacks on the product.
Connections (continued) 14 AUDIO VGA VGA IN Y Pr/Cr AUDIO-R Pb/Cb AUDIO-L COMPONENT IN Connect a PC Audio cable D-Sub cable How to connect: Connect a D-Sub cable between the VGA interface on the PC and the VGA input on the unit. Connect an Audio cable between the AUDIO output on the PC and AUDIO input jack on the unit.
Connections (continued) 15 ANTENNA INPUT HEADPHONE AV1 INPUT/ S-VIDEO IN AV2 INPUTS AV OUT Connect a VCR for Recording VCR for recording Rear of the VCR Audio cable Video cable How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.
T urning the Unit On and Off 16 Turning the Unit On and Off Turning On Turning Off With the power on, Press the Power button on the remote control to turn off.
V iewing TV Programs 17 Your LCD TV can memorise and store all the available channels. After the available channels are memorised, use CH+/- to scan the channels. Auto Search Manual Search Press MENU to display the menu main page. Press repeatedly to select SOURCE menu.
V iewing TV Programs (continued) 18 Skipping Channels Exchanging Channel 1 2 3 4 5 6 7 8 9 Press MENU to display the menu main page. Press repeatedly to select SOURCE menu. Press to access the submenu. Press repeatedly to select MANUAL SEARCH item. Press to access the submenu.
V iewing TV Programs (continued) 19 Setting AFC Function ON or OFF Manual Fine Tuning 1 2 3 4 5 6 7 8 Press MENU to display the menu main page. Press repeatedly to select SOURCE menu. Press to access the submenu. Press repeatedly to select MANUAL SEARCH item.
Basic Operations 20 Changing Channels Using the Channel Buttons (CH+ or CH-) Press the CH+ or CH- to change channels. When you press the CH+ or CH- , the unit changes channels in sequence. You will see all the channels that the unit has memorised. You will not see channels that were erased.
Basic Operations (continued) 21 TV -------- Select TV signal. AV1 ------- Select signal from AV IN (1) terminals. AV2/SV ------- Select signal from AV IN (2) or S-video terminals. YPBPR ------ Select signal from YPbPr. VGA ------ Select signal from VGA jack.
Setting Picture 22 There are three preset picture modes ( BRIGHT , SOFT and NATURAL ) and one user-set picture mode ( PERSONAL ). Each preset mode has its own picture settings. BRIGHT: Select for a bright picture. SOFT: Select for a finely detailed picture.
Setting Picture (continued) 23 Press MENU to display the menu main page. The picture menu page will be displayed automatically. Press to access the submenu. Press repeatedly to select SIZE MODE item. Press to select a desired aspect ratio. You can select the image aspect ratio between FULL , ZOOM1 , ZOOM2 and NORMAL .
Setting T imer 24 NOTE The time interval between CLOCK and TIME OFF should be above 1 minute. When the last 1 minute comes, there exit two situations. The one is: the unit will show you after how many seconds the set will be turned off.
Setting T imer (continued) 25 Note: You may quickly set the sleep time by using the SLEEP button on the remote control. Press MENU to display the menu main page. Press repeatedly to select FUNCTION menu. Press to access the submenu. Press repeatedly to highlight SLEEP TIMER item.
Setting Sound 26 Customising the Sound Press MENU to display the menu main page. Press repeatedly to select SOUND menu. Press to access the submenu. Press repeatedly to select the option items you want to adjust. Press to adjust the value. 1 2 3 4 5 Using the Preset Sound Mode Press MENU to display the menu main page.
Adjusting On-Screen Displays 27 Press MENU to display the menu main page. Press repeatedly to select OSD menu. Press to access the submenu. Press repeatedly to select H-POSITION or V-POSITION item. Press to adjust the OSD position. 1 2 3 4 5 Adjusting OSD Position Adjusting OSD Transparency Press MENU to display the menu main page.
PIP Operations 28 NOTE: You may quickly open or close PIP frame by directly using the PIP button. You may also change the position of the PIP frame by holding the PIP button. Viewing and Changing the Position of the PIP Frame Press MENU to display the menu main page.
Adjustment in VGA Mode 29 Press MENU to display the menu main page. The [PICTURE] menu will be highlighted automatically. Press to access the submenu. Press repeatedly to select the item you wish to change. Press to adjust the value of the item. Press MENU to exit.
Adjusting in VGA Mode (continued) 30 Press MENU to display the menu main page. Press repeatedly to select SCREEN menu. Press to access the submenu. Press repeatedly to select H-POSITION or V-POSITION item. Press to adjust the value of the item until the screen is well-aligned.
T roubleshooting 31 Before calling for repair service, check the following items for possible remedies to an encountered symptom. Symptoms No power Check item "Ghost" or double images Check that the AC power cord is plugged into the mains socket.
Specifications 32 Type: Display Size Diagonal: Power supply: Power Consumption: Dimensions: Weight: TV System: LCD TV 27" AC 100-240V 50/60Hz 140W 809 (W) x 524 (D) x 210 (H) (mm) 19kg PAL BG, NTSC (AV) Design and specification are subject to change without notice.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-L27U63-00 V1.
デバイスPalsonic TFTV681Uの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Palsonic TFTV681Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPalsonic TFTV681Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Palsonic TFTV681Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Palsonic TFTV681Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Palsonic TFTV681Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPalsonic TFTV681Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Palsonic TFTV681Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPalsonic TFTV681Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。