PanasonicメーカーAJ-HD3700Hの使用説明書/サービス説明書
ページ先へ移動 of 22
Digital Video Cassette Recorder Operating Instructions (Supplement 1) AJ- E P.
– 2 – Outline of changes and additions This supplement describes what changes and additions have been made to the operating instructions of the AJ-HD3700H digital video cassette recorder.
– 3 – Recording This flowchart shows the steps for recording the digital signals which are supplied to the unit from an external digital device. 1 1. Check the connections. 1 2. Turn on the power. 1 3. After making sure that no cassette tape is inserted in this unit, set the system frequency 59.
– 4 – Recording ≥ The REF synchronization specifications applying when the 1080/23p, 24p or 25p True-P (Non-PsF) system format is selected are the same specifications as for the PsF system format. Use an interlace format signal for the HD tri-level SYNC signal.
– 5 – HOME menu displays ∑ Audio signal display area (Either 8 or 4 channels will be automatically displayed depending on the format used.) Use this to adjust the level of the input audio signals on the AUDIO IN menu. Alternatively, it is used to adjust the level of the audio playback output signals on the AUDIO OUT menu.
– 6 – VIDEO IN menu This menu is displayed by pressing the following key: VIDEO IN F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1.
– 7 – VIDEO IN menu Key F1 F2 F3 – F6 F7 F8 – F11 F12 F13 Key designation INPUT For selecting the HD video input signals. INT SG For selecting the type of HD internal signals. —— SG REF For synchronizing the INT SG —— INT SG For selecting the type of SD internal signals.
– 8 – TC/CHR menu This menu is displayed by pressing the following key: TC/CHR F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1.
– 9 – TC/CHR menu Description INT: Built-in time code generator. EXT LTC: LTC time code from TIME CODE input connector. S LTC: LTC time code added to serial signals; not displayed when the SD mode is selected. S VTC: VTC time code added to serial signals; not displayed when the SD mode is selected.
– 10 – TC/CHR menu Description ON: CF BIT is recoorded. OFF: CF BIT is not recorded. ≥ When [EXT LTC], [S VITC] or [S LTC] is selected in the F1 key, the VTR conforms to the external color frame bit. Transfers the VTR to the TC/CHR SET UP menu screen.
– 11 – TC/CHR menu ∑ Changing the superimposing position (1) Move the position using the cursor keys. ≥ When a cursor key is held down, the cursor will move more quickly. ≥ When the center cursor key is pressed, the superimposing re- turns to its initial position.
– 12 – TC/CHR CONVERT menu ∑ Concerning the TC SYNC value and sync phase settings Since the TC is similarly converted when the 1080/23psf (p) or 1080/24psf (p) format is converted into the 1080/.
– 13 – TC/CHR CONVERT menu This menu is displayed by pressing the following keys: ) When the center cursor key is pressed, the 24TC display is highlighted. To enter the time code, use the number keys and cursor keys ( 2 , 1 ) to set the time code, and then press the key.
– 14 – SYSTEM SET UP menu This menu is displayed by pressing the following keys: ) The system format and video output format currently set in the menu are displayed.
– 15 – SYSTEM SET UP menu Refer to the setting flowchart and output status tables on pages 134 and 135.) Exactly Which operation is performed differs depending on whether the AJ-UDC3700P HD-SD format con- verter board, an optional accessory, has been installed.
– 16 – Key F5 F6 Key designation HD SDI HD MONI Description For selecting the HD SDI MAIN output format. When the F5 key is pressed while holding down the F key, the HD SDI MAIN output format selection window is opened. The format can now be selected using the cursor keys (but only when “ 1080/23.
– 17 – SYSTEM SET UP menu System format and video output status table [When the AJ-UDC3700P HD-SD format converter board (optional accessory) has been installed] F1: FREQ 59.
– 18 – TEST IC CARD menu Preparations When an error to be logged has occurred, this unit enables information on the date and time of the occurrence of the error to be recorded in addition to the TC information in the log. Initial registration of the date and time is required in order for this information to be recorded.
– 19 – TEST IC CARD menu Description User file management takes place using IC card. When the F key is pressed, transfer is made to TEST IC CARD USER FILE menu. ≥ There is a load/save function for current (present deck status) and all registered files.
– 20 – TEST IC CARD ERROR LOG menu This menu is displayed by pressing the following keys: >> F3 F13 TEST Description Loads current memory data from VTR to IC card.
– 21 –.
PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 EASTERN ZONE: .
デバイスPanasonic AJ-HD3700Hの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Panasonic AJ-HD3700Hをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPanasonic AJ-HD3700Hの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Panasonic AJ-HD3700Hの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Panasonic AJ-HD3700Hで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Panasonic AJ-HD3700Hを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPanasonic AJ-HD3700Hの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Panasonic AJ-HD3700Hに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPanasonic AJ-HD3700Hデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
