PanasonicメーカーKX-A272の使用説明書/サービス説明書
ページ先へ移動 of 20
Model KX-A272 Operating Instructions DECT Repeater Please read before use and save. QUQX00130YA_01_A 20/1/04 6:40 pm Page 1.
2| Operating Instructions T able of Contents Overview ..........................................................................................................3 Compatibility............................................................................
Operating Instructions | 3 Overview A repeater is used when you need to extend the range of your cordless DECT telephone or PBX cell station, to include areas where reception was previously not available. The repeater extends the range in all directions, allowing several floors to be covered.
4| Operating Instructions Environment • Do not use this unit near water . • This unit should be kept away from heat sources such as radiators, cookers, etc. It should also not be placed in rooms where the temperature is less than 5 º C or greater than 40 º C.
Operating Instructions | 5 W all Mounting This unit can be mounted on a suitable wall or placed on a flat surface. • Insert screws into wall. A void pipes and electrical cables etc. that may be present/buried. The centre of the screws must be 71mm apart.
6| Operating Instructions Placement To get the best performance from the repeater: • Select a raised position (on wall etc), which is well within range of the Base Unit/Cell Station. •A void positioning the repeater close to objects that will interfere with reception, such as thick walls, radiators, metal shelving etc.
Operating Instructions | 7 Automatic Registration Automatic registration cannot be performed if the repeater is already registered to another base unit or cell station. Please follow the DE-REGISTRA TION procedure on page 10 before attempting Automatic Registration.
8| Operating Instructions Manual Registration There must be at least one handset already registered to the base unit or cell station to carry out manual registration. • Ensure that the repeater is switched off (disconnect the AC adaptor) (both LEDs are OFF).
Operating Instructions | 9 Manual Registration continued. • Press ‘off hook’ on the handset. The green LED will go steady ON. • Enter a unique identifying number on the handset keypad for each repeater registered. The identifying number can be 2 to 7 for domestic DECT products, and 000 to 255 for PBX DECT products.
10 | Operating Instructions De-Registration In order to perform de-registration, the repeater must have already been registered to a base unit or cell station. • Ensure that the repeater is switched off (disconnect the AC adaptor) (both LEDs are OFF).
Operating Instructions | 11 V erification T one Repeater coverage can be checked by using the in-built verification tone. The coverage area of the repeater can be checked - if the ‘beep’ is no longer heard, then the handset is no longer in range of the repeater .
12 | Operating Instructions Site Survey Mode (PBX option only) This function can be used to measure the transmission quality , and identify problematic transmission areas of the repeater installation. This function can be used when registered or de-registered.
Operating Instructions | 13 Serial Repeater ID programming (PBX option only) This function is used to control up to 3 repeaters in a chain configuration on a PBX system. T o ensure correct operation (and to avoid circular linking), each repeater must be assigned a different chain-level (1 – 3).
14 | Operating Instructions Serial Repeater ID programming continued. • Ensure that the repeater is switched OFF . (both LED’s are OFF) • Power ON the repeater . • Assign the repeater to a base by following either the manual or automatic registration process.
Operating Instructions | 15 Before Requesting Help Problem Possible Cause Solution No function No power Check AC cord is plugged in (LED not lit) Not turned on Check AC adaptor is switched on Cannot r.
16 | Operating Instructions T echnical Information Specifications Standard: DECT=(Digital Enhanced Cordless T elecommunications) Number of channels: 2 Duplex Channels Frequency Range: 1.
Operating Instructions | 17 CONDITIONS OF GU ARANTEE This guarantee is in addition to and does not in any way affect any statutory or other rights of consumer purchasers.
18 | Operating Instructions Index A ccessories ......................................................................................................4 Automatic Registration .............................................................................
Operating Instructions | 19 QUQX00130YA_01_A 20/1/04 6:41 pm Page 19.
Hereby , Panasonic Communications Company (U.K.) Limited declares that this (KX- A272E) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
デバイスPanasonic KX-A272の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Panasonic KX-A272をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPanasonic KX-A272の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Panasonic KX-A272の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Panasonic KX-A272で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Panasonic KX-A272を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPanasonic KX-A272の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Panasonic KX-A272に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPanasonic KX-A272デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
