PanasonicメーカーKX-TDA200の使用説明書/サービス説明書
ページ先へ移動 of 74
KX-TD A30/KX-TD A100 Model KX-TD A200/KX-TD A600 Hybrid IP-PBX PT Pr ogramming Manual Thank you for purchasing a Panasonic Hybrid IP-PBX. Please read this manual carefully before using this product and save this manual for future use. KX-TDA30: PSMPR Software File Version 3.
2 PT Programming Manual Intr oduction About this Pr ogramming Manual The PT Progr amming Manual is designed to ser v e as a reference t o programming the P anasonic Hybrid IP-PBX using a P anasonic proprietar y teleph one (PT) with display .
PT Programming Manual 3 NO TES • The contents of this manual apply to PBXs with a cer tain software v ersion, as indicated on the cov er of this manual. T o confirm t he softw are version of y our PBX, see [190] Main Pr ocessing (MPR) Software V ersion Ref erence .
4 PT Programming Manual T able of Contents 1 Overview .................. ................................................................................ 9 1.1 Intr oduction .......................................................................... ..
PT Programming Manual 5 [303] Special Carrier Access Code ........ ......................... ...................... ......................... .............. ......... ........... 33 [304] Emergency Number ........................ .....................
6 PT Programming Manual [511] Manager Assignment......... ......................... ...................... .......................... ..................... ..................... .. 44 [512] P ermission for Door Open Access........... .................
PT Programming Manual 7 [811] Modem Floating Extension Number ......................... ...................... ......................... .................. ............. 57 [812] ISDN Remote Floating Extensio n Number ............ ....................
8 PT Programming Manual.
PT Programming Manual 9 Section 1 Over vie w This section provides an ov er vie w of programming the PBX..
1.1 Intr oduction 10 PT Programming Manual 1.1 Intr oduction 1.1.1 Intr oduction These progr amming instru ct ions are designed to ser v e as an over all system programmin g reference f or the Panasonic Hybrid IP-PBX. Each f eature in the PBX has default setting s that can be changed to customise the PBX to y our re quirements.
1.1 Introduction PT Programming Manual 11 1.1.2 P ass wor d Security T o maintain system security , system pass words are r equired to access cer ta in programming functions of the PBX. By giving dif ferent users access to diff erent pass words , it is possible to control the amount of pro gramming that each user is ab le to perf or m.
1.1 Intr oduction 12 PT Programming Manual 1.1.3 Entering Characters The f ollowing char acters can be used when storing a name , message, or ot her text e ntr y data using a PT . The tables belo w sho w you the char acters av ailable b y pushing each but ton a specific number of times .
1.1 Introduction PT Programming Manual 13 T able 2 (Option mo de) T able 2 (Option mode f or CE model).
1.1 Intr oduction 14 PT Programming Manual T able 2 (Option mode f or GR model) T able 2 (Option mode f or RU model).
1.1 Introduction PT Programming Manual 15 [Example of Ente ring Characters] T o e nter "Ann": Notes • T o erase the character on th e cursor , press CLEAR. • T o mov e the cursor to the lef t, press . • T o mov e the cursor to the right, pre ss .
1.1 Intr oduction 16 PT Programming Manual.
PT Programming Manual 17 Section 2 PT Pr ogramming This section serves as ref erence operat ing instr u ctions when using a display PT to progr am the PBX.
2.1 PT Pr ogramming 18 PT Programming Manual 2.1 PT Pr ogramming 2.1.1 Pr ogram ming Instructions Required T elepho ne/Extension PBX setti ngs can be customis ed through sys tem programming by using a propr ietar y telephone (P T) with a multili ne display , s uch as the KX-T7 636.
2.1 PT Programming PT Programming Manual 19 Entering System Pr ogramming Mode Using a PT to perf orm system programming allo ws an authorized e xtension user to set a wide ran ge of PBX f eatures and par ameters.
2.1 PT Pro gramming 20 PT Programming Manual [2XX] Timer Programming System timers [3XX] TRS/Barring/ARS Progr amming TRS/Barring and A utomatic Route Selection (ARS) pr og ramming [4XX] T r unk Prog .
2.1 PT Programming PT Programming Manual 21 2.1.2 Maximum V alues Throughout this man ual, maximum entry values are sho wn for each p rogramming item. When maximum entry values f or one or more of the suppor ted PBX models differ , these diff erences are listed within the programming ite m, as sho wn in the example below .
2.1 PT Pro gramming 22 PT Programming Manual Enter values as two-dig it n u mbers (e.g. "04" for por t 4). KX-TD A100/KX-TD A200/KX-TD A600 Slot and P or t V alues A vailab le Slot Entry V alues KX-TD A100/KX-TD A200 Enter slot number s as two-digit number s ( e.
2.1 PT Programming PT Programming Manual 23 Enter values as two-digi t nu m bers (e.g. "04" for por t 4). LCO T4 (KX-TDA100/KX- TD A200 only) 01–04 [400] [409] [ 41x] [450] LCO T8 (KX-TDA1.
2.1 PT Pro gramming 24 PT Programming Manual 2.1.3 Basic Programming [000] Date & Time [In 12-hour Format] [In 24-hour Format] [001] System Speed Dialling Number [002] System Sp eed Dialling Name .
2.1 PT Programming PT Programming Manual 25 Notes • Extensions that wil l hav e a mailbox using a VM in DPT in tegration mu st hav e extensio n numbers of 2–4 dig its.
2.1 PT Pro gramming 26 PT Programming Manual Note that with MPR Softw are File V e rsion 3.1000 or later , if one or more SDN bu ttons hav e been set at the DSS Console, the y must be delete d before this se tting can be changed. [008] Absent Message [010] Charge Mar gin [011] Charge T ax [012] Charge Rate per Unit [008] 1–8 Location No.
2.1 PT Programming PT Programming Manual 27 2.1.4 System Management Pr ogramming [100] Flex ible Numbering [101] Time Service Switching Mode [102] Time Service Star ting Time [In 12-hour Format ] [100] 01–68 Location No. Feature No. END (HOLD) ENTER ENTER CANCEL NEXT T o the Next Location No .
2.1 PT Pro gramming 28 PT Programming Manual [In 24-hour Format] [103] Idle Line A ccess (Local Access) [110] System P assw ord f or Admi nistrator—for PT Pr ogramming [111] System P assw ord f or User—for PT Pr ogramming [112] Manager P ass wor d [120] V erification Code [102] 00:00–23:59 Hour:Minute END ENTER ENTER Day No.
2.1 PT Programming PT Programming Manual 29 [121] V eri fication Code Name [122] V erification Code P er son al Identification Number (PIN) W A RNING There is a risk that fraudulent telephone calls will be made if a thir d party discover s a personal ide ntification number (PIN) (verification code PIN or extension PIN) of the PBX.
2.1 PT Pro gramming 30 PT Programming Manual [190] Main Pr ocessing (MPR) Software V er sion Reference [190] Reference only MPR Version END ENTER.
2.1 PT Programming PT Programming Manual 31 2.1.5 Timer Pr ogramming [200] Hold Recall Time [201] T ransf er Recall Time [203] Inter cept Time [204] Hot Line W aiting Time [205] A utomatic Redial Repe.
2.1 PT Pro gramming 32 PT Programming Manual [208] Call Duration Count Starting Time f or LCO T [209] DISA Dela yed Answer Time [210] DISA T runk-to-T runk Call Prolong Time [211] DISA Inter cept Time.
2.1 PT Programming PT Programming Manual 33 2.1.6 TRS/Barring/ARS Pr ogramming [300] TRS/Barring Override b y System Speed Dialling [301] TRS/Barring Denied Code [302] TRS/Barring Exception Code [303].
2.1 PT Pro gramming 34 PT Programming Manual [321] ARS Leading Number [322] ARS Routing Plan T ab le Number [325] ARS Exception Number [330] ARS Routing Plan Time T ab le [In 12-hour Format] [In 24-hour Format] [321] 0001–1000 Location No. Max. 16 digits Leading No.
2.1 PT Programming PT Programming Manual 35 [331–346] ARS Routing Plan T ab le (1–16) (KX-TD A 30/KX-TD A100/KX- TD A200 onl y) [347] ARS Routing Plan T abl e (1–48) (KX-TD A600 onl y) [350] ARS Carrier Name [351] ARS T runk Gr ou p for Carrier Access [352] ARS Remo ved Number of Digit s for Carrier Access [331–346] Day No.
2.1 PT Pro gramming 36 PT Programming Manual [353] ARS Carrier Access Code [353] Carrier Table No. Max. 32 digits Carrier Access Code END ENTER ENTER KX-TDA30: 01–10 KX-TDA100: 01–10 KX-TDA200: 01.
2.1 PT Programming PT Programming Manual 37 2.1.7 T runk Programming [400] LCO T/BRI T runk Connection [401] LCO T/BRI T runk Name [402] LCO T/BRI T runk Gr oup Number [409] LCO T/BRI T runk Number Re.
2.1 PT Pro gramming 38 PT Programming Manual [412] LCO T DTMF Minim um Duration [413] LCO T CPC Signal Detection Time—Outgoing [414] LCO T CPC S ignal Detection Time—Incoming [415] LCO T Re verse Cir cuit [416] LCO T P ause Time [417] LCO T Fla sh/Recall Time [418] LCO T Disconnect Time [412] 80/160 ms END SELECT ENTER ENTER Slot No.
2.1 PT Programming PT Programming Manual 39 [420] BRI Netw ork T ype [421] BRI DIL/DDI/MSN Selection [422] BRI Subscriber Number [424] BRI La yer 1 Active Mode Note After chan ging this setting, perform [902] Slot Card Reset to enab le th e ne w set ting.
2.1 PT Pro gramming 40 PT Programming Manual [427] BRI TEI Mode Note After changin g this setting, perform [9 02] Slot Card Reset to en ab le the ne w setting . [450] DIL 1:1 Destination [451] DID Number [452] DID Name [453] DID Destination ENTER ENTER [427] Slot No.
2.1 PT Programming PT Programming Manual 41 [470] T runk Gr oup Intercept Destinatio n (not appl icable fo r MPR Software File V e rsion 3.1000 or later) [471] Host PB X Access Code [472] Extension-to-T runk Call Duration [473] T runk-to-T runk Call Duration [475] DISA Silence Detection [470] Trunk Group No.
2.1 PT Pro gramming 42 PT Programming Manual [476] DISA Continuous Si gnal Detection [477] DISA Cyc lic Signal Detection [490] Caller ID Signal T ype [491] P ay T one Signal T ype (KX- TD A100/KX-TD A200/KX-TD A600 onl y) [476] Trunk Group No.
2.1 PT Programming PT Programming Manual 43 2.1.8 COS Pr ogramming [500] T runk Gr oup Number [501] TRS/Barring Level [502] T runk Call Duration Limitation [503] Call T ransf er to T runk [504] Call Forwar ding to T runk [500] 1 Day/2 Lunch/ 3 Break/4 Night 01–64 COS No.
2.1 PT Pro gramming 44 PT Programming Manual [505] Executi ve Busy Override [506] Executive Busy Override Den y [507] DND Override [508] Account Code Mode [509] TRS/Barring Level f o r System Speed Dialling [510] TRS/Barring Le vel f or Extension Dial Loc k [511] Manager Assignment SELECT Disable/ Enable [505] 01–64 COS No.
2.1 PT Programming PT Programming Manual 45 [512] P ermission fo r Door Open Access [514] Time Service Manual Switc hing [515] Wireless XDP P arallel Mo de f or P aired T e lephone [516] Pr ogramming Mode Limitation Disable/ Enable SELECT [512] 01–64 COS No.
2.1 PT Pro gramming 46 PT Programming Manual 2.1.9 Extension Pr ogramming [600] EXtra Device P ort (XDP) Mode [601] T erminal Device Assignment Note With MPR Softw are File V ersion 3.
2.1 PT Programming PT Programming Manual 47 [604] Extension Inter cept Destination [605] Call Forwar ding—No Answer Time [606] CLIP/COLP Number [620] Incoming Call Distrib ution Group Member [621] Incoming Call Distrib ution Group Dela yed Ringing [622] Incoming Call Distrib ution Group Floating Extension Number [604] Max.
2.1 PT Pro gramming 48 PT Programming Manual [623] Incoming Call Distrib ution Group Name [624] Incoming Call Distrib uti on Group Distrib ution Method [625] Destination f or O verflow Ti me Expiration [626] Overflow Time [627] Destinatio n When All Busy [623] Max.
2.1 PT Programming PT Programming Manual 49 [628] Queuing Call Capacity [629] Queuing Hurry-up Level [630] Queuing Time T ab le [631] Sequences in Queuing Time T able [632] Maxim um Number of Ag ents [628] 0–30 Number in Queuing END ENTER ENTER Incoming Call Distribution Group No.
2.1 PT Pro gramming 50 PT Programming Manual [640] Extension User Gr oups of a P aging Gr oup [641] External P agers of a P a ging Group [650] Extension User Gr oups of a Pic kup Group [660] VM Gr oup Floating Extension Number [680] Idle Extension Hunting T ype [640] Extn.
2.1 PT Programming PT Programming Manual 51 [681] Idle Extension Hunting Group Member [690] PS Registration Notes • Extension numbers of PSs can be a maxim um of 4 digits. • Please ref er to the Installation Ma nual f or details about PS registration.
2.1 PT Pro gramming 52 PT Programming Manual [692] P ersonal Identification Nu mber (PIN) for PS Registration [699] CS Status Reference [692] 4 digits PIN for PS Registration END ENTER ENTER 1234 [699] END Slot No. Reference only CS Status ENTER Port No.
2.1 PT Programming PT Programming Manual 53 2.1.10 Resour ce/Interface Programming [700] External P ager Fl oating Extension Number [KX-TD A100/KX-TD A200/KX-TDA600] [KX-TD A30] [710] Music Source Sel.
2.1 PT Pro gramming 54 PT Programming Manual [720] Doorphone Call Destination [KX-TD A100/KX-TD A200/KX-TD A600] [KX-TD A30] [729] Doorphone Number Reference [KX-TD A100/KX-TD A200/KX-TD A600] [KX-TD A30] [730] Outgoing Messa g e (OGM) Floating Extension Number [731] Outgoing Me ssa g e (OGM) Name [720] END 1 Day/2 Lunch/ 3 Break/4 Night Max.
2.1 PT Programming PT Programming Manual 55 [732] DISA Security Mode [732] END None/ Trunk/All SELECT ENTER ENTER.
2.1 PT Pro gramming 56 PT Programming Manual 2.1.11 SMDR & Maintenance Programming [800] RS-232C P arameter—New Line Code [800] RS-232C P arameter—Baud Rate [800] RS-232C P arameter—W ord Le.
2.1 PT Programming PT Programming Manual 57 [803] SMDR Skip P erforation [804] SMDR Outgoing Call Printing [805] SMDR Incomi ng Call Printing [810] Remote Pr ogramming [811] Modem Floating Ex tension .
2.1 PT Pro gramming 58 PT Programming Manual 2.1.12 Card Pr ogramming [900] Slot Ca rd T ype Refere nce [901] Slot Card Deletion [902] Slot Car d Reset [910] OPB3 Option Car d T ype Ref erence (KX-TD A100/KX-TD A200/KX- TD A600 onl y) [911] OPB3 Option Car d Deletion (KX-TD A100/KX-TD A200/KX-TD A600 only) [900] Reference only Slot No.
PT Programming Manual 59 Section 3 Appendix.
3.1 Re vision History 60 PT Programming Manual 3.1 Revision History 3.1.1 KX-TD A600 PLMPR Software File V ersion 3.1xxx Changed Contents • [007] DSS Console P aired T elephone • [470] T runk Group Intercept De stination (not applicab le f or MPR Software File V ersion 3.
3.2 Feature Pr ogramming References PT Programming Manual 61 3.2 Feature Pr ogramming References A Absent Message • [008] Absent Message Feature Gui de Reference 1.19.2 Abse nt Message Account Code Entry • [508] Account Cod e Mode Feature Gui de Reference 1.
3.2 Feature Programming References 62 PT Programming Manual • [504] Call F orw arding to T r unk • [605] Call F orw arding—No Ans wer Time Feature Guide Ref erence 1.3.1.2 Call F orwardi ng (FWD) Call Hold • [200] Hold Recall Time Feature Guide Ref erence 1.
3.2 Feature Pr ogramming References PT Programming Manual 63 1.21.1.2 Calling/ Connected Line Iden tification Presentation (CLIP/COLP) Calling/Connected Line Identification Pres entation (CLIP/COLP) a.
3.2 Feature Programming References 64 PT Programming Manual • [476] DISA Contin uous Signal Detection • [477] DISA Cyclic Signal Detection • [604] Extension Inte rcept Destination • [730] Outgoi ng Message (OGM) Floating Extension Number • [731] Outgo ing Message (OGM) Name • [732] DISA Security Mode Feature Guide Ref erence 1.
3.2 Feature Pr ogramming References PT Programming Manual 65 Extension Dial Loc k • [510] TRS/Barring Le vel f or Extension Dial Loc k Feature Gui de Reference 1.9.3 Extension Dial Loc k Extension P ersonal Identification Number (PI N) • [005] Exten sion P ersonal Identif ication Number (PIN) Feature Gui de Reference 1.
3.2 Feature Programming References 66 PT Programming Manual G Group Cal l Distrib ution • [621] Incoming Call Distribution Group Dela yed Ringing • [624] Incoming Call Distribut io n Group Distribution M ethod • [632] Maxim um Number of Agents Feature Guide Ref erence 1.
3.2 Feature Pr ogramming References PT Programming Manual 67 Integrated Services Digital Network (ISDN) • [420] BRI Netw or k T ype • [424] BRI La yer 1 Active Mode • [425] BRI La yer 2 Active Mode • [426] BRI Configuration • [427] BRI TEI Mode Feature Gui de Reference 1.
3.2 Feature Programming References 68 PT Programming Manual Feature Guide Ref erence 1.5.5.2 Li ne Prefere nce—Outgoing M Manager Features • [112] Mana ger P ass word • [511] Mana ger Assignment Feature Guide Ref erence 2.
3.2 Feature Pr ogramming References PT Programming Manual 69 • [621] Incoming Call Distribution Group Dela yed Ringing • [622] Incoming Call Distrib ution Group Floating Extension Number • [624] Incoming Call Distributio n Group Distribution Method • [629] Queuing Hurry-up Le vel Feature Gui de Reference 1.
3.2 Feature Programming References 70 PT Programming Manual PS Directory • [001] System Speed Dialling Number • [002] System Speed Dialling Name • [004] Extension Name Feature Guide Ref erence 1.25.3 PS Directory PS Ring Group • [620] Incoming Call Dis tribution Group Me mber Feature Guide Ref erence 1.
3.2 Feature Pr ogramming References PT Programming Manual 71 S Software Upgr ading • [190] Main Pr ocessing (MPR) Software V ersion Reference Feature Gui de Reference 2.3.8 Softw are Upgrad ing Special Carrier Access Code • [303] Special Carrier Access Code Feature Gui de Reference 1.
3.2 Feature Programming References 72 PT Programming Manual Feature Guide Ref erence 1.30.1 TIE Line Service Time Service • [101] Time Ser vice Switching Mo de • [102] Time Ser vice Star t ing Time • [514] Time Serv ice Man ual Switching Feature Guide Ref erence 2.
3.2 Feature Pr ogramming References PT Programming Manual 73 V V erification Code Entry • [120] V erification Code • [121] V erification Code Name • [122] V erification Code P ersonal I dentification Number (PIN ) • [123] V erification Code COS Number Feature Gui de Reference 1.
P anasonic Communications Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, J apan PSQX3814XA Copyright: This material is copyrighted by Panasonic Communications Co.
デバイスPanasonic KX-TDA200の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Panasonic KX-TDA200をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPanasonic KX-TDA200の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Panasonic KX-TDA200の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Panasonic KX-TDA200で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Panasonic KX-TDA200を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPanasonic KX-TDA200の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Panasonic KX-TDA200に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPanasonic KX-TDA200デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。