PanasonicメーカーKX-TG2219Bの使用説明書/サービス説明書
ページ先へ移動 of 64
Preparation Basic Operation Advanced Operation Useful Information 2.4GHz Digital Cordless Phone Operating Instructions Model No. KX-TG2219B Pulse-or-tone dialing capability Charge the battery for about 15 hours before initial use. Caller ID Compatible PLEASE READ BEFORE USE AND SAVE.
2 Accessories (included) For extra orders, call 1-800-332-5368. AC Adaptor (p. 11) Order No. KX-TCA1-G ( KX-TCA1 ) one Telephone Line Cord (p. 11) Order No. PQJA10075Z one Battery (p. 12, 52) Order No. N4HKGMA00001 (P-P511) one Wall Mounting Adaptor (p.
3 For assistance, please call: 1-800-211-PANA(7262) For assistance, please call: 1-800-211-PANA(7262) For Best Performance Battery Charge A rechargeable Ni-Cd battery powers the handset. Charge the battery for about 15 hours before initial use (p. 12).
Contents 4 Preparation Location of Controls ...................................................................... 6 Display ............................................................................................. 8 Settings .....................
Special Features .............................................................................46 Automatic Security Code Setting ..................................................46 Temporary Tone Dialing (For Rotary or Pulse Service Users) ..........
Location of Controls 6 Base unit H O L D HOLD I N U N U S E SE C H A R G E CHARGE V M VM H A N D S E T HANDSET LOCA T O R TOR KX - TG 22 22 19 19 IN USE/CHARGE/HOLD Indicator (p. 12, 24, 26, 47) VM (Voice Mail) Indicator (p. 43, 45) (HANDSETÒLOCATOR) Button (p.
7 Preparation For assistance, please call: 1-800-211-PANA(7262) Handset CH EDI T CAL L L W A WA I T PA USE USE TONE TONE VOICE MAIL VOICE MAIL 9 8 3 2 1 6 5 4 7 0 SP - P HONE F U N C T IO N FUNCTION MUTE MUTE VOICE ENHANCER VOICE ENHANCER HOL D REDI AL FL AS H H CLEAR CLEAR Antenna Back side Display (p.
V.E. Ringer off V.E. Recharge 8 Display The handset shows you instructions and information on the display. These display prompts are shown below. “ V.E. ” (Voice Enhancer) on the display means that the V.E. mode is turned on (p. 25). The battery needs to be charged.
9 Preparation For assistance, please call: 1-800-211-PANA(7262) When a call is received, the display shows the caller ’ s name and number after the fi rst ring. During a conversation, the display shows the length of the call (ex. 1 hour, 6 minutes and 35 seconds).
10 A handset button was pressed while the handset was on the base unit. Lift the handset and press the button again. When trying to store an item or Caller List information in the directory, the directory memory is full (p. 33, 36). While programming procedure, the handset has lost communication with the base unit.
11 Preparation For assistance, please call: 1-800-211-PANA(7262) Settings Connections • USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No. KX-TCA1-G ). • The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.
12 Settings Battery Charge Place the handset on the base unit and charge for about 15 hours before initial use. • The IN USE/CHARGE/HOLD indicator lights and a beep sounds. Installing the Battery in the Handset IN USE/CHARGE/HOLD Indicator OR Insert the battery into the handset as shown, matching the correct polarity ( # ).
Operation Operating time 13 Preparation For assistance, please call: 1-800-211-PANA(7262) Up to 11 days While in use (TALK) Up to 4.5 hours While not in use (Standby) • The battery operating time may be shortened depending on usage conditions, such as viewing the Caller ID Caller List or directory list, and ambient temperature.
Dialing Mode If you have touch tone service, set to “ Tone ” . If rotary or pulse service is used, set to “ Pulse ” . Your phone comes from the factory set to “ Tone ” . Make sure the unit is not being used and the handset is lifted off the base unit.
15 Preparation For assistance, please call: 1-800-211-PANA(7262) Line Mode If the line is connected to a low voltage system such as a PBX, set to “ B ” . Your phone comes from the factory set to “ A ” . Make sure the unit is not being used and the handset is lifted off the base unit.
16 Programmable Functions You can program the following function items using the handset near the base unit . The display shows the programming instructions. See the corresponding pages for function details. Make sure the unit is not being used and the handset is lifted off the base unit.
17 Preparation For assistance, please call: 1-800-211-PANA(7262) Auto Talk Feature The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without pressing or . If you want to use this feature, turn the feature ON by programming.
18 Programmable Functions Ringer Volume You can program the handset ringer volume to HIGH, LOW or OFF. If set to OFF, the handset will not ring. Your phone comes from the factory set to HIGH. Make sure the unit is not being used and the handset is lifted off the base unit.
19 Preparation For assistance, please call: 1-800-211-PANA(7262) Ringer Tone You can select the handset ringer tone out of 6 patterns. When an incoming call is being received, the unit rings in the selected tone. Your phone comes from the factory set to 1.
20 LCD Contrast You can program the handset LCD contrast (5 levels). To make the handset display clearer, set to high level. Your phone comes from the factory set to level 3. Make sure the unit is not being used and the handset is lifted off the base unit.
21 Basic Operation For assistance, please call: 1-800-211-PANA(7262) For assistance, please call: 1-800-211-PANA(7262) 1 Press . 2 Dial a phone number. • The dialed number is displayed. • After a few seconds, the display will show the length of the call and the battery strength.
22 Hands-free Digital Duplex Speakerphone For best performance, please note the following: • Talk alternately with the caller in a quiet room. • If the other party has difficulty hearing you, press Ö to decrease the speaker volume.
23 Basic Operation For assistance, please call: 1-800-211-PANA(7262) To dial after confirming the entered number 1 Dial a phone number. • If you misdial, press (HOLD/CLEAR) . One digit is erased. Dial the correct phone number. • To cancel, press (OFF) .
Making Calls To adjust the receiver volume (HIGH, MEDIUM or LOW) or speaker volume (6 levels) while talking To increase, press Ñ . To decrease, press Ö . • The display will return to the length of the call. While using • Each time you press Ö or Ñ , the volume level will change among 3 levels (HIGH, MEDIUM or LOW).
25 Basic Operation For assistance, please call: 1-800-211-PANA(7262) Lighted handset keypad The handset dialing buttons will light when you press a button or lift the handset off the base unit.
26 • When the handset ringer volume is set to OFF, it will not ring (p. 18). When a call is received, the unit rings and “ Incoming call ” is displayed and the IN USE/CHARGE/HOLD indicator on the base unit fl ashes quickly. If you subscribe to a Caller ID service, the calling party information will be displayed after the fi rst ring (p.
27 Basic Operation For assistance, please call: 1-800-211-PANA(7262) Caller ID Service This unit is compatible with a Caller ID service offered by your telephone company. If you subscribe to a Caller ID service, the calling party ’ s information will be shown on the handset after the fi rst ring.
28 1 Press Ö or Ñ to enter the Caller List. • The display will show, for example, the following. • You can go to the directory list by pressing á (p. 39). 2 To search from the most recent call, press Ö . To search from the oldest call, press Ñ .
29 Basic Operation For assistance, please call: 1-800-211-PANA(7262) Ex. When you search from the most recent call: SMITH,JACK 1-222-333-4444 3:10P JUN10 Press Ö or Ñ to enter the Caller List. Press Ö . Press Ö . Press Ö . Press Ö . Press Ö . To return to the previous caller, press Ñ .
30 Using the Caller List 1 Press Ö or Ñ to enter the Caller List. 2 Scroll to the desired caller by pressing Ö or Ñ . 3 Press or . • The displayed phone number is dialed automatically.
31 Basic Operation For assistance, please call: 1-800-211-PANA(7262) Editing the Caller’s Phone Number You can edit a phone number into one of 3 patterns (see below a , b , and c on this page) to call back or store it into the directory. The Caller ID Number Auto Edit Feature (p.
32 Using the Caller List Make sure the unit is not being used and the handset is lifted off the base unit. 1. Press (FUNCTION) . 2. Scroll to “ Program ” by pressing Ö or Ñ and press á . 3. Scroll to “ CallerID edit ” by pressing Ö or Ñ .
33 Basic Operation For assistance, please call: 1-800-211-PANA(7262) Storing Caller List Information in the Directory You can store phone numbers that are in the Caller List into the directory. Make sure the unit is not being used and the handset is lifted off the base unit.
34 1 Press Ö or Ñ to enter the Caller List. 2 Scroll to the caller you want to erase from the Caller List by pressing Ö or Ñ . 3 Press (HOLD/CLEAR) . • A beep sounds and the information is erased. • To erase other items, repeat from step 2. • To exit the Caller List, press (OFF) .
35 For assistance, please call: 1-800-211-PANA(7262) Directory You can store up to 50 names and phone numbers in the directory using the handset. All directory items are sorted by the first word in alphabetical order. Using the directory, you can make a call by selecting a name on the handset display.
36 1 Press (FUNCTION) . 2 Press á at “ Save directory ” . • The display shows the number of stored items in the directory. 3 Enter a name, up to 15 characters with the dialing buttons, Ü or á . • See the steps for entering names and symbols (p.
Advanced Operation 37 For assistance, please call: 1-800-211-PANA(7262) #& ’ () , – ./ 1 ab c A B C 2 de f D E F3 g h iG HI 4 jklJ K L 5 mn oM N O 6 pq r sP Q R S 7 tu v T U V 8 w xyz W X Y Z .
38 For example, to enter “Tom Jones”: 1 Press (FUNCTION) . 2 Press á at “ Save directory ” . 3 Press (8) four times. 4 Press (6) three times, then press á to move the cursor to the right. 5 Press (6) . 6 Press á twice to enter a blank. 7 Press (5) four times.
Advanced Operation 39 For assistance, please call: 1-800-211-PANA(7262) Finding Stored Items You can search the directory using the handset. Make sure the unit is not being used and the handset is lifted off the base unit. 1 Press Ü or á to enter the directory list.
40 1 Press Ü or á to enter the directory list. 2 Press Ö or Ñ . • The fi rst item is displayed. 3 Scroll to the desired item that you want to dial by pressing Ö or Ñ . • To search for the item by initial, see page 39. • To exit the directory list, press (OFF) .
Advanced Operation 41 For assistance, please call: 1-800-211-PANA(7262) Editing Make sure the unit is not being used and the handset is lifted off the base unit. 1 Press Ü or á to enter the directory list. 2 Press Ö or Ñ . • The fi rst item is displayed.
42 Erasing Make sure the unit is not being used and the handset is lifted off the base unit. 1 Press Ü or á to enter the directory list. 2 Press Ö or Ñ . • The fi rst item is displayed. 3 Scroll to the directory item that you want to erase by pressing Ö or Ñ .
Advanced Operation 43 For assistance, please call: 1-800-211-PANA(7262) Voice Mail Service Voice mail service is an electronic on-line answering system offered by your telephone company.
44 To erase a stored number Repeat steps 1 through 5 Press and hold (HOLD/CLEAR) until all of the digits are erased Ö ( Next key) á ( Save key). • A beep sounds.
Advanced Operation 45 For assistance, please call: 1-800-211-PANA(7262) 4 Scroll to “ VM tone detect ” by pressing Ö or Ñ . 5 Press á . 6 Select “ On ” or “ Off ” by pressing Ö or Ñ . 7 Press á ( Save key). • A beep sounds. • To exit the programming mode, press (OFF) .
46 Special Features (FLASH/CALL!WAIT/VOICE!MAIL) (TONE) (OFF) (REDIAL/PAUSE) , , (MUTE) (HANDSET ! LOCATOR) (FUNCTION) Automatic Security Code Setting Each time you place the handset on the base unit, the unit automatically selects one of more than a million security codes.
47 For assistance, please call: 1-800-211-PANA(7262) For Call Waiting Service Users Press (FLASH/CALL!WAIT/VOICE!MAIL) if you hear a call-waiting tone while talking. • The fi rst call is put on hold and you can answer the second call. • To return to the fi rst caller, press (FLASH/CALL!WAIT/VOICE!MAIL) again.
48 FLASH Button Pressing (FLASH/CALL!WAIT/VOICE!MAIL) allows you to use special features of your host PBX such as transferring an extension call or accessing special telephone services (optional) such as call waiting.
49 Useful Information For assistance, please call: 1-800-211-PANA(7262) H You can hang the handset on your belt or pocket using the belt clip. To attach the belt clip To remove the belt clip Headset Jack The illustration headset is a KX-TCA88.
50 Wall Mounting This unit can be mounted on a wall phone plate. 2 Connect the AC adaptor. 3 Tuck the telephone line cord inside the wall mounting adaptor, then push it in the direction of the arrow. • The word “UP” should face upward. 1 Push the hook and turn it around.
51 Useful Information For assistance, please call: 1-800-211-PANA(7262) 4 Connect the telephone line cord. Mount the unit, then slide down. • Raise the antenna. • Fasten the telephone line cord to prevent it from being disconnected. 5 To charge the handset battery: Fix the charge contacts ( # ) and insert the hook to the handset hole ( $ ).
52 Battery Replacement A nickel cadmium battery that is recyclable powers the product you have purchased. At the end of its useful life, under various state and local laws, it is illegal to dispose of this battery into your municipal waste stream. Please call 1-800-8-BATTERY for information on how to recycle this battery.
53 Useful Information For assistance, please call: 1-800-211-PANA(7262) Adding Another Phone This unit will not function during a power failure. To connect a standard telephone on the same line, use the Panasonic T-adaptor KX-J66. To order, call the accessories telephone number on page 2.
54 Troubleshooting Problem The unit does not work. “ No link to base Place on cradle and try again. ” is displayed and an alarm tone sounds. Static, sound cuts in/out, fades. Interference from other electrical units. The unit does not ring. The handset display is blank.
55 Useful Information For assistance, please call: 1-800-211-PANA(7262) Problem Previously programmed information is erased. You cannot store a name and phone number in the directory. While programming or searching, the unit starts to ring and stops the program/ search.
56 Problem You cannot redial by pressing (REDIAL/PAUSE) . “ Recharge ” is displayed, “” fl ashes or the unit beeps intermittently. You charged the battery fully, but “ Recharge ” is still displayed and/or “” continues to fl ash. The IN USE/CHARGE/HOLD indicator light does not go out after the battery has been charged.
57 Useful Information For assistance, please call: 1-800-211-PANA(7262) Important Safety Instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fi re, electric shock, or personal injury. 1 1. Read and understand all instructions.
58 CAUTION: To reduce the risk of fi re or injury to persons, read and follow these instructions. 1. Use only the battery(ies) speci fi ed. 2. Do not dispose of the battery(ies) in a fi re. They may explode. Check with local waste management codes for special disposal instructions.
59 Useful Information For assistance, please call: 1-800-211-PANA(7262) FCC and Other Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identi fi er in the format US:ACJ-----.
60 FCC and Other Information WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and brie fl y explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such as early morning or late evenings.
61 Useful Information For assistance, please call: 1-800-211-PANA(7262) CAUTION: To comply with FCC RF exposure requirements, the base unit should be installed with its antenna located at 20 cm or more from persons and handset should be carried with the speci fi c belt-clip provided for the handset to ensure compliance.
62 For your future reference Serial No. Date of purchase (found on the bottom of the unit) Name and address of dealer Specifications ■ Base unit Power Supply: AC Adaptor (120 V AC, 60 Hz) Power Consumption: Standby: Approx. 2.9 W Maximum: Approx. 3.
63 Useful Information For assistance, please call: 1-800-211-PANA(7262) Index A Accessories ....................................... 2 Answering Calls ............................... 26 Auto Talk Feature ...................... 17, 26 Automatic Security Code Setting .
For product service • Call 1-800-211-PANA(7262) for the location of an authorized servicenter. • Panasonic ’ s e-mail address for customer inquiries: consumerproducts@panasonic.com for customers in the USA or Puerto Rico ONLY When you ship the product • Carefully pack your unit, preferably in the original carton.
デバイスPanasonic KX-TG2219Bの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Panasonic KX-TG2219Bをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPanasonic KX-TG2219Bの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Panasonic KX-TG2219Bの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Panasonic KX-TG2219Bで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Panasonic KX-TG2219Bを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPanasonic KX-TG2219Bの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Panasonic KX-TG2219Bに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPanasonic KX-TG2219Bデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
