PanasonicメーカーKX-TG2247Sの使用説明書/サービス説明書
ページ先へ移動 of 92
Preparation Cordless Telephone Answering System Useful Information 2.4GHz Digital Cordless Answering System Model No. KX-TG2247S Pulse-or-tone dialing capability Operating Instructions PLEASE READ BEFORE USE AND SAVE. Panasonic World Wide Web address: http://www.
2 Before Initial Use Please read IMPORTANT SAFETY INSTRUCTIONS on page 84 before use. Read and understand all instructions. Thank you for purchasing your new Panasonic cordless telephone. Attach your purchase receipt here. Caller ID and Call Waiting Service, where available, are telephone company services.
3 For assistance, please call: 1-800-211-PANA(7262) For assistance, please call: 1-800-211-PANA(7262) For Best Performance Battery Charge A rechargeable Ni-Cd battery powers the handset. Charge the battery for about 15 hours before initial use (p. 14).
Contents 4 Preparation Location of Controls ...................................................................... 6 Displays ........................................................................................... 9 Settings ......................
Muting Your Conversation ............................................................53 For Call Waiting Service Users .....................................................54 How to Use the PAUSE Button (For Analog PBX Line/Long Distance Service Users) .
Location of Controls 6 Base unit.
7 Preparation For assistance, please call: 1-800-211-PANA(7262) I N U N U SE/ SE/ CH CH ARG E/ E/ HOLD HOLD V O L VOL U M E UME MIC S K IP SKIP R E P E A T REPEAT ERASE M E M O MEMO S L O W SLOW T A L K TALK GREETING STOP KX-TG KX-TG 2257 2257 L O C A T O R / I N T E R C O M (REPEAT) Button (p.
8 Handset CH EDI T.
9 Preparation For assistance, please call: 1-800-211-PANA(7262) Displays Both the handset and the base unit show you instructions and information on the displays. These display prompts are shown below. The battery needs to be charged. Place the handset on the base unit to charge the battery (p.
10 Displays Please lift up and try again. The handset has lost communication with the base unit. Place the handset on the base unit and try again. This is a name from the Caller List. The display shows: — the caller ’ s name, — the caller ’ s number, — the time and date of the last call (ex.
11 Preparation For assistance, please call: 1-800-211-PANA(7262) When trying to store an item or Caller List information in the directory, the directory memory is full (p. 41, 44). While programming procedure, the handset has lost communication with the base unit.
12 Base unit display The clock needs adjusting (p. 26). Your greeting or memo message was not recorded correctly. Record it again (p. 23, 61). The unit is in the answering system programming mode. The speaker volume level is set to “ 5 ” . You can select: — 9 levels (0 – 8) are available while using the answering system (p.
13 Preparation For assistance, please call: 1-800-211-PANA(7262) Settings Connections • USE ONLY WITH Panasonic AC ADAPTOR PQLV1 (Order No. PQLV1Z). • The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.
14 Settings Battery Charge Place the handset on the base unit and charge for about 15 hours before initial use. • The IN USE/CHARGE/HOLD indicator lights and a beep sounds.
15 Preparation For assistance, please call: 1-800-211-PANA(7262) Up to 11 days Operation Operating time While in use (TALK) Up to 5 hours While not in use (Standby) • The battery operating time may be shortened depending on usage conditions, such as viewing the Caller ID Caller List or directory list, and ambient temperature.
16 Dialing Mode If you have touch tone service, set to “ Tone ” . If rotary or pulse service is used, set to “ Pulse ” . Your phone comes from the factory set to “ Tone ” . Make sure the unit is not being used and the handset is lifted off the base unit.
17 Preparation For assistance, please call: 1-800-211-PANA(7262) Line Mode If the line is connected to a low voltage system such as a PBX, set to “ B ” . Your phone comes from the factory set to “ A ” . Make sure the unit is not being used and the handset is lifted off the base unit.
18 Programmable Functions You can program the following function items using the handset near the base unit . The display shows the programming instructions. See the corresponding pages for function details. Make sure the unit is not being used and the handset is lifted off the base unit.
19 Preparation For assistance, please call: 1-800-211-PANA(7262) Auto Talk Feature The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without pressing or . If you want to use this feature, turn the feature ON by programming.
20 Programmable Functions Ringer Volume You can program the handset ringer volume to HIGH, LOW or OFF. If set to OFF, the handset will not ring. Your phone comes from the factory set to HIGH. Make sure the unit is not being used and the handset is lifted off the base unit.
21 Preparation For assistance, please call: 1-800-211-PANA(7262) Ringer Pattern You can select the handset ringer pattern out of 6 patterns. When an incoming call is being received, the unit rings in the selected pattern. Your phone comes from the factory set to 1.
22 LCD Contrast You can program the handset LCD contrast (5 levels). To make the handset display clearer, set to high level. Your phone comes from the factory set to level 3. Make sure the unit is not being used and the handset is lifted off the base unit.
23 Preparation For assistance, please call: 1-800-211-PANA(7262) To increase the volume, press VOLUME . To decrease, press VOLUME . Preparing the Answering System Greeting message sample “ Hello, this is (your name and/or number). Sorry I cannot take your call.
24 Preparing the Answering System To check the recorded greeting message Press (GREETING) . To erase the recorded greeting message Press (GREETING) , and then press (ERASE) while the message is being played. • The unit will answer a call with a pre-recorded greeting.
25 Preparation For assistance, please call: 1-800-211-PANA(7262) Programming Summary for Answering System You can program the following functions using the handset near the base unit. The display shows the programming instructions. See the corresponding pages for function details.
26 Day and Time Voice Day/Time Stamp: During playback, a synthesized voice will announce the day and time that each message was recorded. -------------- H Save directory Ringer volume Ringer pattern H Program -------------- -------------- H TAD program Set flash time -------------- H Day and time Remote code 1 Press (FUNCTION/2WAY!REC) .
27 Preparation For assistance, please call: 1-800-211-PANA(7262) If a power failure occurs, the time may be shifted. When “” fl ashes on the base unit display, reprogram the current day/time. To check the day/time Repeat steps 1 to 5 on page 26. • The base unit announces the current day/time displayed on the handset.
28 Caller’s Recording Time You can select “ 1 minute ” , “ 2 minutes ” , “ 3 minutes ” or “ Greeting only ” for the caller ’ s recording time. Your phone comes from the factory set to “ 3 minutes ” . Make sure the unit is not being used and the handset is lifted off the base unit.
29 Preparation For assistance, please call: 1-800-211-PANA(7262) Number of Rings You can select the number of times the unit rings before the answering system answers a call, from “ 2 ” to “ 7 ” or “ Toll saver ” * . Your phone comes from the factory set to “ 4 ” .
30 1 Press . 2 Dial a phone number. • The dialed number is displayed. • After a few seconds, the display will show the length of the call and the battery strength.
31 Cordless Telephone For assistance, please call: 1-800-211-PANA(7262) Hands-free Digital Duplex Speakerphone For best performance, please note the following: • Talk alternately with the caller in a quiet room. • If the other party has difficulty hearing you, press Ö to decrease the speaker volume.
32 Making Calls To dial after confirming the entered number 1 Dial a phone number. • If you misdial, press (HOLD/INTERCOM/CLEAR) . One digit is erased. Dial the correct phone number. 2 Press . OR To have a hands-free phone conversation, press , and when the other party answers, talk into the microphone.
33 Cordless Telephone For assistance, please call: 1-800-211-PANA(7262) To adjust the receiver volume (HIGH, MEDIUM or LOW) or speaker volume (6 levels) while talking To increase, press Ñ . To decrease, press Ö . • The display will return to the length of the call.
34 Answering Calls When a call is received, the unit rings and “ Incoming call ” is displayed and the IN USE/CHARGE/HOLD indicator on the base unit fl ashes quickly. If you subscribe to a Caller ID service, the calling party information will be displayed after the fi rst ring (p.
35 Cordless Telephone For assistance, please call: 1-800-211-PANA(7262) Caller ID Service This unit is compatible with a Caller ID service offered by your telephone company. If you subscribe to a Caller ID service, the calling party ’ s information will be shown on the handset after the fi rst ring.
36 1 Press Ö or Ñ to enter the Caller List. • The display will show, for example, the following. • You can go to the directory list by pressing á (p. 47). 2 To search from the most recent call, press Ö . To search from the oldest call, press Ñ .
37 Cordless Telephone For assistance, please call: 1-800-211-PANA(7262) Ex. When you search from the most recent call: SMITH,JACK 1-222-333-4444 3:10P JUN10 Press Ö or Ñ to enter the Caller List . Press Ö . Press Ö . Press Ö . Press Ö . Press Ö .
38 1 Press Ö or Ñ to enter the Caller List. 2 Scroll to the desired caller by pressing Ö or Ñ . 3 Press or . • The displayed phone number is dialed automatically. TURNER,CINDY 1-234-456-7890 11:20A JAN12 ✕ 3 Talk 12344567890 Calling Back from the Caller List • In some cases, you may have to edit the number before dialing (p.
39 Cordless Telephone For assistance, please call: 1-800-211-PANA(7262) Editing the Caller’s Phone Number You can edit a phone number into one of 3 patterns (see below a , b , and c on this page) to call back or store it into the directory. The Caller ID Number Auto Edit Feature (p.
40 Using the Caller List The Caller ID Number Auto Edit Feature There are 3 patterns of phone number ( a , b , and c , p. 39). This feature allows your phone to automatically edit an in-coming Caller ID number into one pattern you preferred, and display the Caller ID number with that pattern on the handset automatically.
41 Cordless Telephone For assistance, please call: 1-800-211-PANA(7262) Storing Caller List Information in the Directory You can store phone numbers that are in the Caller List into the directory. Make sure the unit is not being used and the handset is lifted off the base unit.
42 1 Press Ö or Ñ to enter the Caller List. 2 Scroll to the caller you want to erase from the Caller List by pressing Ö or Ñ . 3 Press (HOLD/INTERCOM/CLEAR) . • A beep sounds and the information is erased. • To erase other items, repeat from step 2.
43 Cordless Telephone For assistance, please call: 1-800-211-PANA(7262) You can store up to 50 names and phone numbers in the directory using the handset. All directory items are sorted by the fi rst word in alphabetical order. Using the directory, you can make a call by selecting a name on the handset display.
44 Directory 1 Press (FUNCTION/2WAY!REC) . 2 Press á at “ Save directory ”. • The display shows the number of stored items in the directory. 3 Enter a name, up to 15 characters with the dialing buttons, Ü or á . • See the steps for entering names and symbols (p.
45 Cordless Telephone For assistance, please call: 1-800-211-PANA(7262) # & ’ ( ) ,–. /1 ab c A B C 2 de f D E F 3 g h iG HI 4 jklJ K L 5 mn oM N O 6 pq r sP Q R S 7 tu v T U V 8 w xyz W X Y Z.
46 For example, to enter “Tom Jones”: 1 Press (FUNCTION/2WAY!REC) . 2 Press á at “ Save directory ” . 3 Press (8) four times. 4 Press (6) three times, then press á to move the cursor to the right. 5 Press (6) . 6 Press á twice to enter a blank.
47 Cordless Telephone For assistance, please call: 1-800-211-PANA(7262) Finding Stored Items You can search the directory using the handset. Make sure the unit is not being used and the handset is lifted off the base unit. 1 Press Ü or á to enter the directory list.
48 Directory Directory list GF H =Caller’s list Dialing Make sure the unit is not being used and the handset is lifted off the base unit. 1 Press Ü or á to enter the directory list. 2 Press Ö or Ñ . • The fi rst item is displayed. 3 Scroll to the desired item that you want to dial by pressing Ö or Ñ .
49 Cordless Telephone For assistance, please call: 1-800-211-PANA(7262) Jane Walker 1-234-456-7890 Editing Make sure the unit is not being used and the handset is lifted off the base unit. 1 Press Ü or á to enter the directory list. 2 Press Ö or Ñ .
50 Erasing Make sure the unit is not being used and the handset is lifted off the base unit. 1 Press Ü or á to enter the directory list. 2 Press Ö or Ñ . • The fi rst item is displayed. 3 Scroll to the directory item that you want to erase by pressing Ö or Ñ .
51 Cordless Telephone For assistance, please call: 1-800-211-PANA(7262) Intercom A 2-way intercom is possible between the handset and the base unit. Paging the base unit from the handset 1 Handset: Press (HOLD/INTERCOM/CLEAR) . Talk to the paged party after the beeps.
52 During an intercom call: • If the handset user has difficulty hearing the base unit user, decrease the base unit speaker volume by pressing VOLUME . • If an incoming call is received, the intercom call stops and the unit starts to ring. To answer, press or .
53 Cordless Telephone For assistance, please call: 1-800-211-PANA(7262) Special Features (FLASH/CALL!WAIT/PLAYBACK) (TONE) (OFF) (REDIAL/PAUSE) , , (MUTE) (FUNCTION /2WAY!REC ) Automatic Security Code Setting Each time you place the handset on the base unit, the unit automatically selects one of more than a million security codes.
54 Special Features For Call Waiting Service Users Press (FLASH/CALL!WAIT/PLAYBACK) if you hear a call-waiting tone while talking. • The fi rst call is put on hold and you can answer the second call. • To return to the fi rst caller, press (FLASH/CALL!WAIT/PLAYBACK) again.
55 Cordless Telephone For assistance, please call: 1-800-211-PANA(7262) Flash time :700ms GF H =Save TAD program H Set flash time Set line mode Flash time :110ms Ringer pattern H Program -------------.
56 Automatic Answering Operation When the unit answers a call, a greeting message is played and the caller’s message is recorded. • The total recording time (including greeting message) is about 15 minutes . If messages are recorded in noisy rooms, the time may be shortened by up to 3 minutes.
57 Answering System For assistance, please call: 1-800-211-PANA(7262) Listening to Messages You can see the total number of recorded messages on the base unit display. If MESSAGE PLAYBACK indicator fl ashes, new messages have been recorded. To play back messages, press (MESSAGE!PLAYBACK/SLOW!TALK) .
Listening to Messages 58 For Caller ID service users (p. 35) During playback, when the handset is on the base unit, the handset display will show the name and/or number of the caller whose message is being played. To call back the displayed number: During playback, lift the handset and press or within 10 seconds.
59 Answering System For assistance, please call: 1-800-211-PANA(7262) From the Handset If someone else is in the room and you want to listen to the recorded messages privately, you can use the handset. 1 Handset: Press (FLASH/CALL!WAIT/PLAYBACK) . • The number of new messages is heard on the handset.
60 Erasing Messages The unit will announce the remaining recording time after playback, if it is less than 5 minutes. New messages cannot be recorded when: —“ Memory full ” is heard. —“ ” is displayed on the base unit. — the ANSWER ON indicator fl ashes rapidly.
61 Answering System For assistance, please call: 1-800-211-PANA(7262) Recording a Memo Message You may record a personal message in memory. 1 Press (MEMO) . • A long beep sounds. 2 After the beep, talk clearly approximately 8 inches (20 cm) away from the MIC .
62 Remote Operation from a Touch Tone Phone You can operate the answering system from any touch tone phone. A synthesized voice menu will guide you on how to operate the unit (p. 64). • To skip the voice menu and operate the unit directly, see page 66.
63 Answering System For assistance, please call: 1-800-211-PANA(7262) -------------- H Save directory Ringer volume Ringer pattern H Program -------------- -------------- H TAD program Set flash time .
64 Remote Operation from a Touch Tone Phone Voice Menu The shaded boxes are voice prompts. Press 1 to play back all messages. Press 2 for other functions. Press 1 to play back new messages. Press 2 for other functions. Press 1 to record your message. Press 2 for other functions.
65 Answering System For assistance, please call: 1-800-211-PANA(7262) All Message Playback All recorded messages are played back. At the end of the last message, “ End of final message ” is heard. The unit will announce the remaining recording time if it is less than 5 minutes.
66 [ Remote Operation from a Touch Tone Phone Direct Remote Operation Once you have entered the remote code, you can also control your unit by direct commands instead of using the voice menu.
67 Answering System For assistance, please call: 1-800-211-PANA(7262) ERASING A SPECIFIC MESSAGE (During playback) ERASING ALL MESSAGES ANSWERING SYSTEM OFF (0) • The current message is erased. • A short beep will sound and the next message will be played.
68 Remote Operation with the Handset Voice menu If no commands are entered after you press (FLASH/CALL!WAIT/PLAYBACK) , the unit will start the following voice menu. “ Press 4 to play back new messages. Press 5 to play back all messages. ” • You can enter direct commands even if the voice menu has started.
69 Answering System Direct commands For assistance, please call: 1-800-211-PANA(7262) NEW MESSAGE PLAYBACK ALL MESSAGE PLAYBACK REPEAT (During playback) SKIP (During playback) CHANGING PLAYBACK SPEED .
70 Wall Mounting This unit can be mounted on a wall phone plate. 2 Connect the AC adaptor. 3 Tuck the telephone line cord inside the wall mounting adaptor, then push it in the direction of the arrow. • The word “UP” should face upward. 1 Push the hook and turn it around.
71 Useful Information For assistance, please call: 1-800-211-PANA(7262) 4 Connect the telephone line cord. Mount the unit, then slide down. • Raise the antenna. • Fasten the telephone line cord to prevent it from being disconnected. 5 To charge the handset battery: Fix the charge contacts ( # ) and insert the hook to the handset hole ( $ ).
72 H You can hang the handset on your belt or pocket using the belt clip. To attach the belt clip To remove the belt clip Headset Jack The illustration headset is a KX-TCA88. Connecting an optional headset to the handset Open the headset jack cover, and connect an optional headset to the headset jack as shown below.
73 Useful Information For assistance, please call: 1-800-211-PANA(7262) Battery Replacement A nickel cadmium battery that is recyclable powers the product you have purchased. At the end of its useful life, under various state and local laws, it is illegal to dispose of this battery into your municipal waste stream.
74 Adding Another Phone This unit will not function during a power failure. To connect a standard telephone on the same line, use the Panasonic T-adaptor KX-J66.
75 Useful Information For assistance, please call: 1-800-211-PANA(7262) Problem “ No link to base Place on cradle and try again. ” is displayed and an alarm tone sounds. Static, sound cuts in/out, fades. Interference from other electrical units. The unit does not ring.
76 Troubleshooting Problem The unit does not display the caller ’ s name and/or phone number. The handset display exits the Caller List. When a second call is received during a conversation, the unit does not display the new caller ’ s name and/or phone number.
77 Useful Information For assistance, please call: 1-800-211-PANA(7262) Problem The answering system is on, but incoming messages are not recorded. You cannot listen to the recorded messages. “” is displayed and the ANSWER ON indicator fl ashes rapidly, and no new messages are recorded.
78 General Problem The unit does not work. You cannot program items, such as the dialing mode. Remedy • Check the settings (p. 13 – 17). • Charge the battery fully (p. 14). • Clean the charge contacts and charge again (p. 15). • Install the battery properly (p.
79 Useful Information For assistance, please call: 1-800-211-PANA(7262) Problem Previously programmed information is erased. “ Recharge ” is displayed, “” fl ashes or the unit beeps intermittently. You charged the battery fully, but “ Recharge ” is still displayed and/or “” continues to fl ash.
80 openLCR Service for Caller IQ Feature The Caller IQ feature is compatible with service provided by openLCR. Important: • If you have any questions regarding the openLCR service, call openLCR’s customer service department at 1-866-openLCR (1-866-673-6527).
81 Useful Information For assistance, please call openLCR: 1-866-openLCR (1-866-673-6527) To set Caller IQ to OFF (When Caller IQ is ON.) 1 Press (CALLER!IQ) . 2 Press (0) . 3 Press (3) . 4 Press (#) . • A beep sounds and Caller IQ function is set to OFF.
82 To get new Info., please press # . Download in process. Please wait. Download OK! Talk Listen & follow phone guidance. Downloading the Telephone Directory Data To edit your telephone directory, go to the openLCR web site to update your directory, and then download the data to your unit.
83 Useful Information For assistance, please call openLCR: 1-866-openLCR (1-866-673-6527) Ex. Weather [Caller IQ on] Press “ 1 ” or “ # ” . 1:View Info. #:Get new Info. 1:Weather 2:Lottery 3:Stock H 90 L 70 F UV 2 Dew 64 F Humidity 42% 6-28 12:58pm Fort Collins CO 78 F PartlyCldy To view information 1 Press (CALLER!IQ) .
84 Important Safety Instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fi re, electric shock, or personal injury. 1 1. Read and understand all instructions. 1 2. Follow all warnings and instructions marked on this unit.
85 Useful Information For assistance, please call: 1-800-211-PANA(7262) CAUTION: To reduce the risk of fi re or injury to persons, read and follow these instructions. 1. Use only the battery(ies) speci fi ed. 2. Do not dispose of the battery(ies) in a fi re.
86 FCC and Other Information If requested by the telephone company, inform them as follows: Registration No. ....................................................(found on the bottom of the unit) Ringer Equivalence .....................................
87 Useful Information For assistance, please call: 1-800-211-PANA(7262) CAUTION: Any changes or modi fi cations not expressly approved by the party responsible for compliance could void the user ’ s authority to operate this device.
88 FCC and Other Information • Environment — do not place the unit in a room where the temperature is less than 5 ° C (41 ° F) or greater than 40 ° C (104 ° F). Allow 10 cm (4") clearance around the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.
89 Useful Information For assistance, please call: 1-800-211-PANA(7262) Index A Accessories ................................... 2 Answering calls ........................... 34 Auto talk ................................ 19, 34 Automatic Security Code Setting .
90 For product service • Call 1-800-211-PANA(7262) for the location of an authorized servicenter. • Panasonic ’ s e-mail address for customer inquiries: consumerproducts@panasonic.com for customers in the USA or Puerto Rico ONLY When you ship the product • Carefully pack your unit, preferably in the original carton.
.
Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infanter í a, Km. 9.
デバイスPanasonic KX-TG2247Sの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Panasonic KX-TG2247Sをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPanasonic KX-TG2247Sの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Panasonic KX-TG2247Sの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Panasonic KX-TG2247Sで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Panasonic KX-TG2247Sを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPanasonic KX-TG2247Sの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Panasonic KX-TG2247Sに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPanasonic KX-TG2247Sデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
