PanasonicメーカーTX-22LT2の使用説明書/サービス説明書
ページ先へ移動 of 40
22 ˝ Diagonal LCD TV Operating Instructions TX-22L T2 Model No. TQBC 0356 F.P. INDEX HOLD PICTURE SOUND SET UP TV/TEXT ASPECT TV/AV 1 2 3 4 5 6 7 C 8 9 0 VCR DIRECT TV REC TX-22LT2 T X - 2 2 L T 2 Please read these instruction before operating your set and retain them for future reference.
2 Dear Panasonic Customer W elcome to the Panasonic family of customers. W e hope that you will have many years of enjoyment fr om your new 22 ″ Diagonal LCD TV . T o obtain maximum benefit fr om your set, please r ead these Instructions befor e making any adjustments, and r etain them for futur e r efer ence.
3 FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULL Y This appliance is supplied with a fitted three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. If the fuse is replaced then the replacement fuse must be 5 amp rated and should be approved by AST A or BSI to BS1362.
4 Before Operating This Set Supplied Accessories Check the accessories before installations. • Operating Instruction book (TQBC0356) • Remote Control T ransmitter (EUR51 1252) • AC Adaptor & Main Lead AC Adaptor: (N0JZHK000004) Main Lead: (K2CT3AA00001) • Batteries for the Remote Control T ransmitter (2 × R6 (UM3) size) F.
5 Before Operating This Set Receiver Location Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range.
6 Quick start Guide 1. Choose Y our Connection T ype Connection and setting up options • If connecting the TV using an RF cable only , see below . • If connecting the TV using Scart and RF cables, see page 7. • If connecting the TV to a Q-Link (or Q-Link compatible) VCR, see page 7.
7 Quick start Guide 3. Q-Link connection of TV and VCR using Scart and RF cables RF connection Connect the AERIAL to the Aerial in socket of the VCR and on RF cable from the VCR Aerial Out socket to the TV Aerial socket ( ). Scart connection The VCR must be connected to the A V2 Scart socket of this TV using a ‘ fully wired ’ Scart cable.
8 Quick start Guide 4. Q-Link connection of TV , VCR and Satellite using Scart and RF cables For Q-Link to function correctly the TV , VCR and Satellite Receiver must be connected as shown in the diagram below . RF connections • Connect an RF cable to the Aerial In socket of the Satellite Receiver .
9 Quick start Guide 2 1 3 3. Switch TV ON Programmes will appear immediately if your dealer has programmed the TV for you. If the TV has not been programmed for you then Auto setup will begin, your stations will be located, sorted into order and stored ready for use.
10 Quick start Guide Prog. Position All channels No CH5 No CH5 / S4C No CH4 / CH5 No S4C No CH4 / S4C No CH4 / S4C / CH5 1 BBC1 BBC1 BBC1 BBC1 BBC1 BBC1 BBC1 2 BBC2 BBC2 BBC2 BBC2 BBC2 BBC2 BBC2 3 ITV.
11 Quick start Guide 6. Owner ID TV/AV 'STR' Button - Store Owner ID Exit Change Character You now have the opportunity to enter your details and help the police crack crime see instruction .
12 Aspect (see page 28, 29) Sound mute (see page 13) TV/AVmode Selection (see page 13) Volume Up ( ), Down ( )/ Programme Number Up ( ), Down ( ) Volume adjustment which uses these buttons is performed after pressing Function button.
13 Basic controls Direct Programme Number Selection (CH SELECT = POSITION) Y ou can select the numbers directly by pressing “ Number 0-9 ” button and the two digit Numbers by pressing “ T wo Digit ” and “ Programme Number ” buttons. Programme Number 8 .
14 Basic controls STR STR Volume Backlight Contrast Brightness Colour Tuning mode Balance Treble Bass Tint Sharpness 4 Recall button Press to display programme position, programme name, channel number , time, NICAM mode, ASPECT mode and programme table.
15 REC VCR DVD PROGRAMME N STR F. P. INDEX HOLD PICTURE SOUND SET UP TV/TEXT ASPECT TV/A V 1 2 3 4 5 6 7 8 9 C 0 VCR DIRECT TV REC Using the On Screen Displays Many features available on this TV can be accessed via the On Screen Display menu system. Use the remote control as shown below to access and adjust features as desired.
16 Contrast Brightness Colour Sharpness Comb filter Off Colour balance Normal AI Backlight Mode Dynamic On Picture menu F. P. INDEX HOLD PICTURE SOUND SET UP TV/TEXT TV/A V Picture menu 1 Press PICTURE . 2 Move to chosen menu option by using or . 3 Adjust chosen option or access chosen menu by using or .
17 Picture menu Comb filter AI Mode Automatically analyses the incoming picture and processes it to give improved contrast and optimum depth of field. Y ou can change the level of each Function (Backlight, Contrast, Brightness, colour , Sharpness, colour balance, comb filter , AI, T int) for each picture menu.
18 F. P. INDEX HOLD PICTURE SOUND SET UP TV/TEXT ASPECT TV/A V 1 2 3 4 5 6 7 8 9 DIRECT TV REC 1 Press SOUND . 2 Move to chosen menu option by using or . 3 Adjust chosen option or access chosen menu by using or . Press TV/A V at any time to go back to watching TV .
19 Sound menu Helpful Hint ( Normalization) The ‘ N ’ key has no effect if it is pressed when menu is displayed on the screen. If the ‘ N ’ key is pressed when no menu is displayed on the screen, the user-preset original settings will be restored (this is not the factory default settings).
20 1 Press SET UP . 2 Move to chosen menu option by using or . 3 Adjust chosen option or access chosen menu by using or . Press TV/A V at any time to go back to watching TV .
21 T uning menu-overview F. P. INDEX HOLD PICTURE SOUND SET UP TV/TEXT TV/A V 1 2 3 DIRECT TV REC 1 Press SET UP . 2 Move to the T uning menu option by using or . 3 Access T uning menu by using or . 4 Move to chosen menu option by using or . 5 Adjust chosen option or access chosen menu by using or .
22 T uning menu Programme edit F. P. INDEX HOLD PICTURE SOUND SET UP TV/TEXT TV/A V 1 Press SET UP . 2 Move to the T uning menu option by using or . 3 Access T uning menu by using or . 4 Move to chosen menu option by using or . 5 Access Programme edit by using or .
23 T uning menu Renaming a programme channel Move to the Name colum. Choose the new character . The box at the bottom of the screen shows the character currently selected. Move to the next character position. Continue until renaming is done. Press STR to store the new name.
24 T uning menu PICTURE SOUND SET UP TV/A V 1 Press SET UP . 2 Move to the T uning menu option by using or . 3 Access T uning menu by using or . 4 Move to chosen menu option by using or .
25 T uning menu Manual tuning It is possible to retune an individual programme position: PICTURE SOUND SET UP TV/A V 1 Press SET UP . 2 Move to chosen menu option by using or . 3 Access T uning menu by using or . 4 Move to chosen menu option by using or .
26 T uning menu Shipping condition Shipping condition allows you to reset the TV to its original condition, i. e. no channels tuned in. This is useful, for example, if you move to a different area when you will probably want the TV to tune itself to your new local stations.
27 T uning menu 1 Press SET UP . 2 Move to chosen T uning menu option by using or . 3 Access chosen T uning menu by using or . 4 Move to chosen menu option by using or .
28 Press the ASPECT ASPECT to move through the five aspect options: Panasonic Auto, 4:3, Zoom, 16:9 and 14:9. Notes: • If you leave Aspect set to Panasonic Auto, the TV software determines the best ratio for each programme viewed.In order not to disrupt your viewing, no mode information is displayed while this is happening.
29 Aspect Controls Blue button has been pressed to move picture upwards Zoom Zoom V-POS − V-POS + Zoom V-POS − V-POS + 16 : 9 16 : 9 4:3 4:3 will display a 4:3 picture at its standard 4:3 size without any stretching. Black stripes will be visible down the left and right sides of the picture.
30 Q-Link This is a Q-Link TV . Q-Link, NEXTVIEWLINK and similar technology provide a way for a TV and VCR to communicate, making it easier to record programmes.
31 T uning your VCR and satellite receiver Y our new TV is supplied with programme position ‘ 0 ’ set to receive an RF signal from your VCR, although a Scart connection is preferable if the VCR is so equipped (see page 6 or 36 for suitable inputs to the Scart socket on this TV .
32 Advanced Remote Control Operation VCR / DVD Operation The Remote Control is capable of operating some functions of selected Panasonic VCRs and DVD (Digital V ersatile Disc) equipment.
33 Advanced Remote Control Operation TELETEXT · T eletext features may vary depending on the Broadcasting Companies and is only available if the channel selected is transmitting T eletext. · Pressing the Picture button whilst in T eletext operation will display the contrast function with a cyan bar , press or to alter the setting as required.
34 Advanced Remote Control Operation It is not possible to change the programme position when in News flash, Update or Sub Coded Page Access operation. List Store In List mode the four page numbers can be altered (programme positions 1 - 25 only). T o do this, press one of the four coloured buttons and enter the new page number .
35 Advanced Remote Control Operation 1 23 4 56 7 89 0 SET UP Blue Y ellow Sub Coded Page Access When T eletext information exceeds more than one page, it may take some time for the automatic changing of the sub pages to reach the sub page you require.
36 S-VIDEO cable VIDEO AUDIO Audio OUT RL S-Video OUT Video OUT Connect the S-VIDEO or VIDEO T erminal. Input/Output from A V1 Scart Socket Scart cable Connection example: A V3 connection Connection e.
37 AUDIO IN L R 3.5 mm stereo plug to stereo phono lead. Connections How to connect the AUDIO OUT T erminals Note: The AUDIO OUT terminal provides a fixed level output only . (The menu settings and remote control volume controls have no effect.) Additional equipment and cables shown are not supplied with this TV set.
38 Maintenance T roubleshooting If there is a problem with your LCD TV please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer , quoting the model number and serial number (both found on the rear of the TV).
39 Specifications 21 19 17 15 13 11 9 7 5 3 1 20 18 16 14 12 10 8 6 4 2 Socket Earth CVBS out (video) CVBS earth Red in Red earth Green in Green earth Blue in Blue earth Audio out (L) Audio out (R) CV.
Customer ’ Record The model number and serial number of this product can be found on its rear panel. Y ou should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for W arranty Service purposes.
デバイスPanasonic TX-22LT2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Panasonic TX-22LT2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPanasonic TX-22LT2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Panasonic TX-22LT2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Panasonic TX-22LT2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Panasonic TX-22LT2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPanasonic TX-22LT2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Panasonic TX-22LT2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPanasonic TX-22LT2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
