PelcoメーカーC607M-Eの使用説明書/サービス説明書
ページ先へ移動 of 20
INSTALLATION/OPERATION C607M-E (2/09) RCS Series Rack Mount Power Supply.
.
C607M-E (2/09) 3 Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Important Safe ty Instruct ions .
4 C607M-E (2/09) List of Illustrations 1 Package Conten ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C607M-E (2/09) 5 Regulatory Notices This device co mplies with Pa rt 15 of the FCC Rules. Operat ion is subject to the following two conditions: (1) this device may n ot c ause harmf ul interference, and (2 ) this device must accept any interference received, inclu ding interference t hat may cause undesired oper at io n.
6 C607M-E (2/09) Important Safety Instructions Observe the f ollowing warnin gs before installing an d using this product. 1. Read these instructions. 2. Keep these instructions. 3. Heed al l warnings. 4. Follow all instructions. 5. Do not us e this dev ice near wate r .
C607M-E (2/09) 7 Description The RCS Ser ies rack mount power suppl y consists of a multi-ou tput, indoor , rack mounted po wer supply th at can provid e power fro m a sing le source for 8, 16, or 32 cameras. The RCS Series is designed with transformers that mini mize voltage variance s across the full r ange of loads.
8 C607M-E (2/09) Before Y ou Begin Before you begin, verify that your unit contains all of th e parts listed in Figure 1. Figure 1. Package Contents T o install your RCS Series rack moun t power suppl.
C607M-E (2/09) 9 Indicators and Connections FRONT PANEL The front panel of the RCS Series r ack mount power supply contains the following indicators and moun ting holes. Figure 2. Front Panel (circuit breaker model shown) NOTE: The additional hole s on the front panel are used for the optional locking face plate.
10 C607M-E (2/09) REAR PANEL The rear panel of the RCS Series rack mount power supply cont ains the follow ing connectors. Figure 3. Rear Panel Connecto rs ì= V oltage Selector Switch: Determines the voltage of the un it. By default, the unit is eq uipped for 1 15 V AC line voltage .
C607M-E (2/09) 11 Rack Installation The RCS Series rack mount po wer supply fits into an industry-s tandard 19-inch (48 cm) e quipment rack. Y our unit occupies 1 RU (1 .75 inch es or 4.5 cm) of ver tical rack sp ace. The hard ware necess ary to moun t the power supply into a rack is supplied with the unit.
12 C607M-E (2/09) 2. Secure the front of the unit in place by fastenin g four 10-32 rack screws (supplied) . Figure 5. Securing the Power Supply with Screws 3. Insert the rear supp ort rails into the rack from be hind and slide them into the mounting rails on ea ch side of the unit.
C607M-E (2/09) 13 4. Secure the rear sup port rails in place by fast ening four 10-32 rack screws (supplied). Figure 7. Securing Rear Support Rails to the Mounting Rails 5. If neces sary , change the voltag e from 115 V AC to 230 V A C by rotating the selector switch located next to the power con nector (r efer to Rear Panel on pa ge 10).
14 C607M-E (2/09) Connecting Devices to the Power Supply Before you connect d evices to the power supply , refer to T able A on page 7 and T able C on pag e 15 to deter mine the out put wiring n e eded for each device. T o connect a device t o the power supp ly: 1.
C607M-E (2/09) 15 RECOMMENDED WIRING DISTANCES Refer to T able C f or the recommend ed maximum dista nces (transf ormer to load), wh ich are calcula ted with a 10 perc ent voltage dro p. Distances are calculat ed in feet; va lues in pare ntheses are in meters.
16 C607M-E (2/09) Circuit Breakers and Fuses RESET A CIRCUIT BREAKER Circuit breakers are self-setting and do not need to be reset manually . REPLACE A FUSE Each power supply is provided wit h extra fuses should one ne ed to be replaced. NOTE: This power supply do es not support hot swapp ing of fuse(s).
C607M-E (2/09) 17 Specifications POWER Power Consumpt ion Refer to T able D on p age 15 Input V oltage 115 V AC, 60Hz or 23 0 V AC, 50Hz (± 10%), selectable Input Fuse V aries by model and input Outp.
.
PRODUCT W ARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without c harge, any merchandise proved defective in material or workmanship for a pe riod of one year after the date of shipment.
Pelco, Inc. Worldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el (800) 289-9100 Fax (800) 289-9150 International T el +1 (559) 292-1981 Fax +1 (559) 348-1120 www .
デバイスPelco C607M-Eの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Pelco C607M-Eをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPelco C607M-Eの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pelco C607M-Eの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pelco C607M-Eで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pelco C607M-Eを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPelco C607M-Eの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pelco C607M-Eに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPelco C607M-Eデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。