PelcoメーカーDD53TC16-Xの使用説明書/サービス説明書
ページ先へ移動 of 42
Spectra III ™ Series C2446M-E (11/05) ® OPERA TION/PROGRAMMING Models DD53TC16 & DD53TC16-X.
.
OPERA TION/PROGRAMMING MANUAL MODELS DD53TC16 & DD53TC16-X 16X LowLight ™ COLOR TECHNOLOGY.
4 C2446M-E (11/05).
C2446M-E (11/05) 5 CONTENTS WELCOME ................................................................................................................................................................................................. 7 GETTING ST ARTED ..
6 C2446M-E (11/05) POWER UP ....................................................................................................................... ............................................................... 26 POWER UP ACTION ....................
C2446M-E (11/05) 7 WELCOME Thank you for purchasing Pelco’ s premier integrated dome system, Spectra III. Y our new system features a high resolution, color camera/optics package with LowLight ™ technology and programmable dome drive software. This manual is designed to be a reference tool for the operation and programming of your system.
8 C2446M-E (11/05) HOW TO OPERA TE YOUR DOME SYSTEM Operation How to Control Pan and T ilt Move joystick or press the direction keys left/right and up/down. Zoom Far T o zoom far , do the following: 1. Press the Zoom T ele button or turn the joystick clockwise until zoom stops at the 32X zoom limit .
C2446M-E (11/05) 9 Accessing Main Menu (Preset 95) Y ou can call up the main menu on your monitor by programming (setting or creating) preset 95 (preset 28 if in AD32-preset mode). Programming preset 95 for Pelco’ s controllers varies according to the type of controller you are using.
10 C2446M-E (11/05) KBD4000/KBD4002 1. Press the SPOT MONITOR key . 2. Enter 95, then hold the PRESET key (approximately five seconds) until the main menu appears on the screen. MPT9500 Standard Coaxitron Mode 1. Enter 95 and press the PRESET SET key .
C2446M-E (1 1 /05) 11 QUICK ST ART GUIDE – SYSTEM SETUP Presets The following presets are reserved for special functions. Preset Function 33 Flip command 34 Pan zero command 83-89 Reserved 90-91 Man.
12 C2446M-E (11/05).
C2446M-E (11/05) 13 LANGUAGE The language for the on-screen menus is selectable. Available languages include English, Spanish, French, German, Italian, Portuguese, Russian, Polish, T urkish, and Czechoslovakian. The factory default language is English.
14 C2446M-E (11/05) SYSTEM INFORMA TION The system Information screen displays dome drive model, software version, available memory , and other diagnostic information. System settings cannot be changed using this screen. This screen is for reference only .
C2446M-E (11/05) 15 DISPLA Y SETUP Display setup allows you to program how labels are displayed on the monitor . The following labels are available: PRESET LABEL - Identifies preset. ZONE LABEL - Identifies zone. ZOOM RA TIO - Identifies the amount of magnification.
16 C2446M-E (11/05) Label Position Labels can be placed anywhere on the monitor . This feature allows you to customize the appearance of your monitor screen. The following labels are not set at fixed positions: PRESET LABEL ZONE LABEL ZOOM RA TIO - XXX.
C2446M-E (11/05) 17 BACK EXIT AUTO FOCUS ON ZOOM LIMIT X128 ZOOM SPEED MEDIUM LOW LIGHT LIMIT 2 <ADVANCED SETTINGS> CAMERA DOME SETTINGS Camera AUTO FOCUS Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and motion functions.
18 C2446M-E (11/05) BACK EXIT ADVANCED SETTINGS SHUTTER SPEED AUTO AGC LIMIT 25 AUTO IRIS AUTO AUTO IRIS LEVEL 66 AUTO IRIS PEAK 8 AUTO SHARPNESS ON SHARPNESS LEVEL 26 AUTO WHITE BALANCE ON R GAIN 482.
C2446M-E (11/05) 19 AUTO IRIS Auto iris is the lens function that automatically opens and closes the iris in response to changing light conditions. Program the auto iris to operate automatically or at a user -defined level. OFF Auto iris is disabled, and control is always manual.
20 C2446M-E (11/05) AUTO SHARPNESS Auto sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening the edges in the picture. There are two settings: ON (default) The camera automatically maintains a normal sharpness mode.
C2446M-E (11/05) 21 BACKLIGHT COMPENSA TION (BLC) If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette. Backlight compensation enhances objects in the center of the picture. The dome uses the center of the picture to adjust the iris.
22 C2446M-E (11/05) Motion Settings AUTO FLIP When the camera tilts downward and goes just beyond the vertical position, the dome rotates 180 degrees. When the dome rotates (flips), the camera starts moving upward as long as you continue to hold the joystick in the down position.
C2446M-E (11/05) 23 PARK TIME This feature allows the dome to go to preset 1 after a programmed time of inactivity . Park time can be programmed from 1 minute to 720 minutes (12 hours), or set to zero, which disables this feature. The default setting is zero.
24 C2446M-E (11/05) SCAN SPEED Scan speed is the degrees per second that the dome will pan when in a scan mode. Scan speed is adjustable from 1 to 40 degrees per second through the programming menu. The default setting is 25 degrees per second. LIMIT STOPS Limit stops are programmable stops that limit the pan range of the dome.
C2446M-E (11/05) 25 AZIMUTH ZERO Azimuth is the pan angle from 0 ° to 359 ° . Azimuth zero is the pan position you specify to be the 0 ° point. Azimuth zero is normally set to magnetic north. Once set, azimuth and compass readings are based on the set Azimuth Zero point.
26 C2446M-E (11/05) Power Up POWER UP ACTION This setting defines a specific activity (scan, preset, pattern) to be performed in the event the power to the dome is cycled. The following settings are available: NONE No action. AUTO SCAN Dome starts auto scan operation.
C2446M-E (11/05) 27 Line Sync Line sync refers to a programmable function that allows you to synchronize all cameras within a matrix system. NOTE: Spectra III automatically senses V-sync input. No line sync setup is r equired for Pelco control systems that provide a V-sync signal.
28 C2446M-E (11/05) Presets The Spectra III dome system has 99 preset positions. Each of the user -definable presets can be programmed to use pan, tilt, camera settings, and motion detection. The programmable presets are numbered 1-32 and 35-82. The following presets are predefined for specific functions: Preset Action 33 Flip command.
C2446M-E (11/05) 29 Patterns A pattern is a memorized, repeating, series of pan, tilt, zoom and preset functions that can be recalled with a command from a controller or automatically by a programmed function (alarm, park or power -up). The Spectra III can handle one user -defined pattern.
30 C2446M-E (11/05) Zones A zone is a pan area, defined by a left and right limit, on the 360-degree pan plane. The Spectra dome system is capable of eight zones, each with a 20-character label. T o program a zone: 1. Use the joystick to position the cursor beside ZONE NUMBER.
C2446M-E (11/05) 31 (See page 11) Quick Programming Guide T itle T ext T itle text is the label used to identify the camera viewed on the monitor . Up to 20 characters can be used for a title. T o edit the title text label, do the following: 1. Use the joystick to position the cursor beside EDIT TITLE TEXT .
32 C2446M-E (11/05) Alert NOTE: The Alert section only applies to Pressurized Spectra III dome systems with software version 1.25 or higher . Spectra III systems that are not pressurized or pressurized systems that do not have dome drive software version 1.
C2446M-E (11/05) 33 ACK ACTION Acknowledge action programs the alert label behavior after the alert condition has been acknowledged. The following settings are available for ACK ACTION: AL WA YS ON The alert label is displayed until alert conditions are cleared.
34 C2446M-E (11/05) BACK EXIT CLEAR RESTORE FACTORY DEF AUL TS EXIT SPECTRA III LANGUAGE ENGLISH <SYSTEM INFORMA TION> <DISPLA Y SETUP> <DOME SETTINGS> ACK ALERT* RESET CAMERA CYCLE .
C2446M-E (11/05) 35 BACK EXIT ENABLE P ASSWORD OFF <EDIT P ASSWORD> P ASSWORD EDIT THE P ASSWORD ---------- 1234567890 OK ABCDEFGHIJ CANCEL KLMNOPQRST UVWXYZ.
36 C2446M-E (11/05) EXIT SPECTRA III LANGUAGE ENGLISH <SYSTEM INFORMA TION> <DISPLA Y SETUP> <DOME SETTINGS> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM *This setting only applies to Pressurized Spectra III dome systems with software version 1.
C2446M-E (11/05) 37 SOFTWARE/LANGUAGE FILE UPLOAD The RJ-45 data port of the dome drive allows access for on-site setup, testing, and uploading of revised operating software and language files. A Pelco field service tool is required to perform these operations.
38 C2446M-E (11/05) SPECIFICA TIONS DD53TC16 Signal Format NTSC Scanning System 2:1 Interlace Image Sensor 1/4-inch interline transfer CCD Effective Pixels 768 (H) X 494 (V) Horizontal Resolution >470 TV lines Lens F1.4 (f=4~64 mm optical, 16X optical zoom, 8X digital zoom) Zoom Speed (optical range) 1.
C2446M-E (11/05) 39 ® Pelco, the Pelco logo, and Genex are registered trademarks of Pelco. © Copyright 2005, Pelco. ™ Spectra III and LowLight are trademarks of Pelco. All rights reserved. REVISION HISTORY Manual # Date Comments C2446M 2/02 Original version.
.
.
World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
デバイスPelco DD53TC16-Xの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Pelco DD53TC16-Xをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPelco DD53TC16-Xの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pelco DD53TC16-Xの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pelco DD53TC16-Xで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pelco DD53TC16-Xを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPelco DD53TC16-Xの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pelco DD53TC16-Xに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPelco DD53TC16-Xデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
