PelcoメーカーDX9000RMの使用説明書/サービス説明書
ページ先へ移動 of 20
DX9000RM-KIT C644M (1/04) ® INST ALLA TION.
2 C644M (1/04) CONTENTS Section Page DESCRIPTION ..........................................................................................................................................................................................................
C644M (1/04) 3 DESCRIPTION The DX9000RM-KIT allows you to upgrade DX9000 recorders and viewstations with the same RAID Manager software that is found in DX9200 recorders and DX9100 viewstations.
4 C644M (1/04) INST ALLA TION Make sure the following parts are included with your kit. 1V iewstation Disk #1 1V iewstation Disk #2 1V iewstation Disk #3 1 Recorder Disk 1 Floppy Ghost Disk NOTE: Y ou must write down your system’ s name and IP address, and export all videos before starting these procedures.
C644M (1/04) 5 3. Select Advanced BIOS Features, and then press Enter . The following screen appears. Figure 2. Advanced BIOS Features 4. Select CDROM as the First Boot Device, and then press Enter . 5. Select Floppy as the Second Boot Device, and then press Enter .
6 C644M (1/04) GHOST PROCEDURE This procedure allows you to configure your master viewstation. 1. Close all applications on the viewstation. 2. Insert Viewstation Disk #1 (CD-DX9000RM-VS1) into the CD-ROM drive of the viewstation. 3. Go to Start > Shutdown > Restart.
C644M (1/04) 7 3. Use pcAnywhere™ remote control software to select the recorder you wish to install the RAID Manager software on. Figure 5 shows a recorder named PELCO124. Figure 5. DX9000 Recorder 4. Click OK. The login window appears. Figure 6. Login Window 5.
8 C644M (1/04) Figure 8. Viewstation Name 9. Click OK. The login window appears. 6. Click OK. The following window appears. Figure 7. Recorder Applications 7. Close all applications on the recorder , such as the DX9000 Recording Server application and DX9000 Server Attendant application.
C644M (1/04) 9 10. Enter your username and password. The default username is admin and the default password is 1234 . The following window appears. Figure 9.
10 C644M (1/04) 11. Open the Additional Installs folder on the viewstation. The following window appears. Figure 10. Raid Manager Folder.
C644M (1/04) 11 12. Copy the RAID Manager software on the viewstation to the Additional Installs folder on the recorder . Figure 11. Raid Manager Software Copy Procedure 13. Close the network connection to the viewstation and install the Raid Manager .
12 C644M (1/04) RAID MANAGER INST ALLA TION Before you install this utility on the recorder , you must install it on the administrator viewstation. 1. Open the Additional Installs folder on the recorder . The following window appears. Figure 13. Welcome Dialog Box Figure 12.
C644M (1/04) 13 3. Click Next. The following dialog box appears. Figure 14. Software License Agreement Dialog Box 4. Click Y es. The following dialog box appears.
14 C644M (1/04) 5. Click Next. The following dialog box appears. Figure 17. Raid Manager Server Component Figure 16. Select Components Dialog Box 6. Select Raid Manager Server , and then click Next.
C644M (1/04) 15 7. Click Next. The following dialog box appears. Figure 18. Select Program Folder Dialog Box 8. Click Next and then Finish..
16 C644M (1/04) CONFIGURE THE RAID MANAGER SERVER 1. Go to Start > Programs > Raid Manager Utility > Raid Manager Server > Raid Manager Server . The following dialog box appears. Figure 19. Detect Option Dialog Box 2. V erify that the process found “1 SCSI/Fiber RAID Controller .
C644M (1/04) 17 6. Right-click the Raid Manager Server icon. The following menu appears. Figure 21. Run at Windows Startup Menu Option 7. Select “Run at Windows Startup.” 8. Right-click the icon again to verify that “Run at Windows Startup” changed to “Remove from Windows Startup.
18 C644M (1/04).
C644M (1/04) 19 REVISION HISTORY Manual # Date Comments C644M 1/04 Original version. ® Pelco and the Pelco logo are registered trademarks of Pelco. ® Windows is a registered trademark of Microsoft Corporation. © Copyright 2004, Pelco. ™ pcAnywhere is a trademark of Symantec.
World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.
デバイスPelco DX9000RMの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Pelco DX9000RMをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPelco DX9000RMの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pelco DX9000RMの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pelco DX9000RMで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pelco DX9000RMを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPelco DX9000RMの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pelco DX9000RMに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPelco DX9000RMデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。