PelcoメーカーEW5001の使用説明書/サービス説明書
ページ先へ移動 of 32
INSTALLATION C2681M (2/08) Endura ® EW5001 Wireless Access Point/Bridge.
2 C2681M (2/08) Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Exposure to Radio Frequen cy Fields .
C2681M (2/08 ) 3 List of Illustrations 1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 C2681M (2/08) Regulatory Notices This device co mplies with Pa rt 15 of the FCC Rules. Operat ion is subject to the following two conditions: (1) this device may n ot c ause harmf ul interference, and (2 ) this device must accept any interference received , including interfere nce that may cause undesired op erat io n.
C2681M (2/08 ) 5 Description The EW5001 is a high-per formance, singl e-radio wire less unit th at can be co nfigured a s either an access point or a bridge. Access point: The EW5001 pr ovides a wirele ss link betw een a cluste r of EW53 01T wireless vi deo encoder s and an En dura ® network in a point-to-m ultipoint co nfiguration.
6 C2681M (2/08) Before Y ou Begin Endura is a network system that re quires a contin uous amount of bandwidth to transmit tr ue, live video. Therefore, always inclu de y our network administrator when plan ning and installing Endura comp onents.
C2681M (2/08 ) 7 PACKAGE CONTENTS The following diagram sho ws the content s of the box . Figure 1. Package Contents POWER CONNECTOR AND CABLE 1 EA. INST ALLA TION MANUALS (2 EA.), CONFIGURA TION MANUAL, SAFETY INSTRUCTIONS WEA THERPROOF NETWORK CONNECTOR 1 EA.
8 C2681M (2/08) APPLICATION SCENARIOS Figure 2 sho ws the EW5001 used as an a ccess point f or multiple E W5301T video encoders in a sample ap plication sce nario. Figure 2. Sample EW5001 Access Point Application Scenario IMPORT ANT NOTE. PLEASE READ.
C2681M (2/08 ) 9 Figure 3 shows the EW5001 u sed as a wireless bridge betwee n an Endura network an d an EW5002 with a clu ster of EW5301T vide o enco ders.
10 C2681M (2/08) Figure 4 shows the EW5001 u sed as a wireless bridge between an Endura network an d an Endura-ena bled IP-type device. Figure 4. Sample EW5001 Wireless Bridge with IP-T ype Devices Application Scenario NOTE: This scenari o can only be configured by an Endur a-certifie d technician .
C2681M (2/08 ) 11 PRODUCT SERIAL NUMBER LABEL PLACEMENT Product ser ial number labe ls help Pelco P roduct Supp ort identif y your system an d its factor y configuratio n in case the EW50 01 o r its components require servi ce. A label citing your pr oduct’ s serial number is attache d to the rear pa nel of the EW5001 .
12 C2681M (2/08) Site Preparation Before you install the EW 5001, complete the following items: • Select a site fo r the EW5001. • Install a mount for the EW50 01. • Wire the site f or power and n etwork acc ess. The EW500 1 supports Po wer -over-Ethernet (PoE).
C2681M (2/08 ) 13 POWER AND NETWORK WIRING The EW5001 s upports two me thods for s upplying powe r and netwo rk access to the unit: separate powe r and netwo rk cables or a sing le network cable using Power -over -Ethernet (PoE) technology . The following sections describe bot h methods.
14 C2681M (2/08) T o install the power cable (refer to Figure 6 on pa ge 13): 1. Run power line s from the powe r supply to the mount site (refer t o the power specificatio ns at the st art of this s ection).
C2681M (2/08 ) 15 T o install the network cable (refer to Fig ure 6 on page 13): 1. Run the ne twork cable from a network sw itch inside the bu ilding to the mou nt site. The equipment must sup port Gigabit Ether ne t operatio n. NOTE: If you use a junction box or pat ch panel, make su re the connection is pr otected from the we ather .
16 C2681M (2/08) POWER -OVER -ETHERNET (POE) Power -over-Ethernet (PoE) lets you su pply both power and network connectiv ity over a singl e cable. This simplifie s installation and decreases the potential f or unit fa ilure. The EW5001 supports Po E from ei ther a PoE injector or a PoE -enabled ne twork switc h.
C2681M (2/08 ) 17 T o install PoE fo r the EW500 1 (refer to Figure 8) : 1. Install the PoE equipm ent (refer to the equip ment docume ntation). 2. Run the n etwork cable from the Po E equipment to the mount site. The equip ment must support Gigabit Ethernet operation.
18 C2681M (2/08) ANTENNA INSTALLATION Pelco offer s a planar an tenna with in tegrated mou nt (EW-ANTP-2-9 or EW-ANTP-5-8) for use with t he EW5001. The se are the o nly an te nnas that can be mounted dir ectly to the EW5001. A ny other antenn a must be mounted se parately .
C2681M (2/08 ) 19 Unit Installation T o install the EW5001: NOTE: If installing a separate an tenna, skip to step 2 on page 20. 1. Attach th e integrated an tenna and ante nna cable to the EW5 001. NOTES: • It is easier to attach the in tegrated antenn a to the unit on the ground before carrying it up to the mount .
20 C2681M (2/08) 2. Install the mount (refer to the moun t documentation fo r more information). 3. Orient the J- box so that the arrows and the wo rd “UP” ar e pointed up (refer to Figure 12). Figure 12. J-Box Orientation 4. Secure the J-box to the mount (refer to Figure 13).
C2681M (2/08 ) 21 5. Identify th e best rout e for the power and ne twork cabl es into the J-box (ref er to Figur e 14). Figure 14. Routing Power and N etwork Cables 6. T o use the top or bottom ope ning for cables : Remove the plug fro m the appropriat e opening in th e J-box (refer to Figu re 15).
22 C2681M (2/08) 8. Hang the hi nge of the EW5001 onto the hinge b olts in the J-box (refe r to Figure 16). Figure 16. Attaching the EW5001 to the J-Box 9.
C2681M (2/08 ) 23 10. Connect all ca bles (refer to Figure 17): NOTE: Be sure to fully seat each c onnector . Othe rwise, environ mental prot ection may fail, causing the unit to f ail. Figure 17. Connecting Cables to the EW5001 a. If installing a power cable: Connect the power cable connector .
24 C2681M (2/08) DISCONNECTING AN ANTENNA CABLE The antenn a cable conn ector is l ocking. T o discon nect it, fir st pu ll the sleeve away from the device and hold it (refer t o Figu re 18).
C2681M (2/08 ) 25 Operation INDICATORS The EW5001 h as a set of six indicators o n its rear panel (refe r to Figure 20 ). These ind icators show u nit status during star tup and norma l operation. Figure 20. EW5001 Status Indicators INDICATORS DURING STARTUP During the startup seq uence, the unit steps t hrough a n umber of phase s.
26 C2681M (2/08) INDICATORS DURING OPERATION During oper ation, the in dicators sho w unit status as well as statu s changes (r efer to T able D). ANTENNA ALIGNMENT T o achieve the best results, a lign the an tenna on the E W5001 with the antenna on t he other En dura wireless device .
C2681M (2/08 ) 27 3. Point the an tenna on the EW5 001 toward the ante nna on the ot her Endura wireless device. 4. Set the sca le on the DVM fo r 0 VDC (zero VDC) to 6 VDC.
28 C2681M (2/08) T roubleshooting If the following in structions fail to solve your problem, contact Pelco Prod uct Support at 1-800-289-91 00 (USA and Canad a) or 1 -559-2 92-1981 (international) for assistance.
C2681M (2/08 ) 29 Specifications MODEL NUMBER EW5001-2 Wireless access po int or brid ge; 2.4 G Hz EW5001-5 Wireless access po int or brid ge; 5.8 G Hz SUPPLIED ACCESSORIES Power Cable with Connecto r.
30 C2681M (2/08) POWER Power Consumptio n 9.7 W , 33 BTU /H Power Input 12 VDC ±10% 24 VAC ±10% 48 VDC (PoE) (802.3af-compliant) ENVIRONMENT AL Operating T emperat ure -30° to 1 22°F (-34° to 50.
PRODUCT W ARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without c harge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
デバイスPelco EW5001の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Pelco EW5001をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPelco EW5001の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pelco EW5001の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pelco EW5001で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pelco EW5001を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPelco EW5001の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pelco EW5001に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPelco EW5001デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
