PelcoメーカーIP3701Hの使用説明書/サービス説明書
ページ先へ移動 of 20
QUICK START C3433M-A (8/07) W eb Browser for Pelco IP Cameras IP110 Camclosure ® Series IP3701H Series.
2 C3433M-A (8/07) Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C3433M-A (8/07) 3 VIDEO QUALITY CAUTION Pelco systems are capable of providing high quality vide o for both live viewing and playback. However , the systems can be used in lower quality modes, which can degrade picture quality , to allow for a slower rate of data transfer and to reduce the amount of video data stored.
4 C3433M-A (8/07) W elcome This manual explains how to interface with the IP camera using a standard Web browser (for example Microsoft ® Internet Explorer ® ). The IP camera can also be used with an Endura ™ system as an Endura Enabled ™ device or a third-party system with Pelco’ s API interface.
C3433M-A (8/07) 5 IP ADDRESS SETTINGS The network automatically assigns an IP address to t he camera. The following scenarios describe how a DHCP or static network assigns IP settings: • DHCP network: If the camera is connected to a DHCP network, the server will auto matically assign an IP address to the camera.
6 C3433M-A (8/07) Using a W eb Browser The following are the minimum system requirement s to use a Web browser with the IP camera: • PC (Pen tium ® 4 microprocessor , 1.6 GHz) with Windows 98, Windows 2000, Windows XP (or higher) or Mac OS X 10.3.9 (or higher) • RAM: 512 Mbyte • Ethernet Card: 100 Mbit • Internet Explorer 5.
C3433M-A (8/07) 7 IP Camera Main Menu HOME SCREEN The following features are available from the Home screen: • Live stream view: Live vide o displays in the center of the screen. • Image rate setting: The image rate can be set to 15, 10, 5, 2, or 1 ips; the default setting is 15 ips.
8 C3433M-A (8/07) IMAGE RATE SETTING The image rate for the IP camera can be set to 15, 10, 5, 2, or 1 ips. The default setting is 15 ips. T o change the image rate do the following: 1. Click the down arrow to ope n the Image Rate drop-down box. 2. Select an image rate from the drop-down box.
C3433M-A (8/07) 9 SETTINGS SCREEN Use the Settings screen to set the name and language of the IP camera; configure network settings; and add, change, or delete user s and roles (permissions). GENERAL T AB Use the General tab to change the device name to a user -friendly name.
10 C3433M-A (8/07) NETWORK T AB Use the Network tab to change network settings incl uding the host name, turn on/off the DHCP (Dynamic Host Configuration Protocol) setting , or set a static IP address. Figure 4. Network T ab How to Change the Network Settings 1.
C3433M-A (8/07) 11 USERS T AB The Users tab allows the administrator to create, modi fy , or delete user accounts (which can contain one or more roles). The Users tab includes default accounts for the followin g: • Administrator: Th is is the only defined user that cannot be deleted.
12 C3433M-A (8/07) How to Add a New User 1. Click Settings in the main menu. T he IP camera settings menu ope ns. 2. Click the Users tab. The “Create a New User” form opens. 3. Complete the form; User name , Password and Role are required. Do not use spaces when entering the user name in the User Name text box.
C3433M-A (8/07) 13 ROLES T AB Use the Roles tab to create, change, or delete roles ( permissions). Multiple permissions can be assigned to a role. The following permissions can be assigned to a role: • Edit Users Profile: Gives users permission to edit their own profile.
14 C3433M-A (8/07) How to Modify an Existing Role 1. Click Settings in the main menu. T he IP camera settings menu ope ns. 2. Click the Roles tab. All defined roles are listed on the left side of the screen. 3. Click a defined Role. The “Create a New Role” form changes to the Editing Role form.
C3433M-A (8/07) 15 EDIT PROFILE SCREEN The Edit Profile screen gives users permission to mo di fy their individual account. They can change/edit the information in the following text boxes: •F i r s t N a m e •L a s t N a m e • Password Figure 9.
16 C3433M-A (8/07) T roubleshooting Problem Possible Cause Suggested Remedy No video PoE power issue • V erify CA T 5 cable connection. • V erify PoE injector power . • Disconnect the Cat5 cable from the Po E and then reconnect the cable. Power is indicated by the LED.
C3433M-A (8/07) 17 No dual streams Web browser Not available with Web browser . Only supported by the Endura system or Pelco’ s API Interface solution. Cannot record a MJPEG stream Web browser Not available with Web browser . Only supported by the Endura system or Pelco’ s API Interface solution.
18 C3433M-A (8/07) Specifications VIDEO Signal System NTSC or P AL Compression MPEG-4, MJPEG in Web viewing mode Video Streams 3, simultaneous Video Resolutions NTSC PA L 4CIF 704 x 480 704 x 576 2CIF.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merc handise proved defective in mate rial or workma nship for a period of one year after the date o f shipment.
Australia | Canada | Finland | France | Germany | Italy | Macau | The Netherlands | Russia | Singapore South Africa | Spain | Sweden | United Arab Emirates | United Kingdom | United States Worl dwide .
デバイスPelco IP3701Hの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Pelco IP3701Hをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPelco IP3701Hの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pelco IP3701Hの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pelco IP3701Hで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pelco IP3701Hを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPelco IP3701Hの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pelco IP3701Hに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPelco IP3701Hデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。