Pentaxメーカー33WRの使用説明書/サービス説明書
ページ先へ移動 of 116
Digital Camera Operating Manual To ensure the best performance from your camera, please read the Operating Manual before using the camera..
Thank you for buying the PENTAX Op tio 33WR Digital Camera. Please read this manual before using the came ra in order to ge t the most out of all the features and func tions. Keep this manual safe, as it can be a valuable tool in helping you to unde rstand all the camera’s capabilities.
1 We have paid close attention to the safety of this product. When using this product, we request your specia l attention regarding items marked with the following symbols. Warning • Do not disassemble or modify the came ra. High voltage areas are present inside the camera, with the risk of electric shock.
2 • Always confirm that the camera is worki ng properly when the camera has not been used for a long time, or before important o ccasions (weddings, trips, etc.). PENTAX is not responsible for consequential damages (costs incurred for photography, lost profits, etc.
3 • This camera conforms to JIS, (Jap anese Industrial Standard) Class 5 water resistant, (Direct jetting water under defined conditions shall have no harmful effect) and Class 7 water resistant, (Water shall not enter the enclosure when it is immersed in water up to 30 minut es at a depth of 1 meter.
4 FOR YOUR SAFETY ..... ................................................................... 1 Handling the Camera ........................................................................ 2 Water-resistant Feat ure .....................................
5 Selecting the Quality Level ............................................................. 41 Adjusting the White Ba lance ......................... .................................. 42 Setting the Focusing Area .....................................
6 Editing/Settings 85 Editing Images ................... ................................................................. 85 Changing the Image Si ze ............................................................... 85 Trimming Images ........... .....
7 This operating manual contai ns the following chapters. The symbols used in this oper ating manual are explained below. Contents of This Manual 1 Getting Started ––––––––––––.
8 (*) Items marked with an asterisk are al so available as optional accessories. For other optional accessories, see “Optional Accessories” (p.105) .
9 Front view Back view Names of Parts Shutter release button Power switch Self-timer lamp Flash Lens Microphone Strap lug Battery/card cover Water-resistant packing Tripod socket LCD monitor DC input .
10 Guide display A button operation guide is displayed on the LCD monitor during operation. The buttons are indicated as shown below. Names of Operating Parts Four-way controller ( 2 ) 2 Zoom/ f / y b.
11 Getting Started 1 Getting Started Attaching the Strap Pass the narrow end of the strap thro ugh the strap lug, and attach as shown..
12 1 Getting Started Powering the Camera Install batteries in the camera. Us e one CR-V3, or use two AA lithium batteries, AA Ni-MH batteries, or AA alkaline batteries. Turn off the camera when setting batteries. Wipe away water or dirt from the camera with a dry cloth before setting batteries.
13 1 Getting Started • These figures are based on PENTAX measur ing conditions. They may vary by capture mode or shooting conditions. When using for a prolonged period, please use the AC adapter D-AC5 (p.15). • AA lithium, AA alkaline battery , and the CR-V3 battery are not rechargeable.
14 1 Getting Started You can check the battery level with the * display on the LCD monitor. Battery Level Indicator * (lit green) : Adequat e power remains. ↓ , (lit green) : Battery is running low. ↓ ; (lit yellow) : Battery is running very low. ↓ % (lit red) : Battery is exhausted.
15 1 Getting Started When using the LCD monitor for a long time or when connecting to your PC, we recommend using the AC adapter D-AC5 (sold separately). 1 Make sure the camera is tu rned off before opening the terminal cover. 2 Connect the DC terminal on the AC adapter to the DC input terminal on the camera.
16 1 Getting Started Installing / Removing the SD Memory Card / MultiMediaCard The image or recorded audio is re corded on the SD Memory Card / MultiMediaCard. Be sure the camera is turned off before inserting or removing the SD Memory Card / MultiMediaCard.
17 1 Getting Started 1 Slide the battery/card cover in the direction of the arrow , and flip open. 2 Press the SD Memory Card / MultiMediaCard in the direction of the arrow e , then pull out the ejected card. 3 Wipe away any sand or debr is on the water-resistant packing and the areas between the camera and the packing.
18 1 Getting Started •P r e caut ions when using an SD Memory Card / MultiMediaCard • Make sure the camera is turned off before opening the battery/card cover.
19 Getting Started 1 Turning the Camera On and Off 1 Press the power switch. The camera will turn on. Press the power switch agai n to turn the camera off. When the camera is turned on, the camera automatically checks for a card. If there is no SD Memory Card / MultiMedia Card inside the camera, ^ appears on the LCD monitor.
20 1 Getting Started Initial Settings If the initial settings screen appears wh en you turn the camera on, follow the procedure below to set the di splay language, Home Town, DST, video output format and current date an d time.
21 1 Getting Started You can choose the city (Home Town) in which yo u will use the camera. 1 Press the four-way controller ( 45 ) to select the desired city (Home Town). 2 Press the four-way controller ( 3 ). The screen for setting the D.S.T. will be displayed.
22 1 Getting Started You can choose the output format (N TSC or PAL) for taking or playing back pictures using a TV monitor. 1 Use the four-way controller ( 45 ) to select the video output format. The default setting is NTSC. 2 Press the OK button. The screen for setting the date and time will be displayed.
23 1 Getting Started 4 Press the four-way controller ( 5 ). 23 is displayed above and below the month. 5 Press the four-way controller ( 23 ) to change the month. 6 Press the four-way controller ( 5 ). 23 are displayed above and below the date. 7 Press the four-way controller ( 23 ) to set the date and press the four-way controller ( 5 ) again.
24 2 Quick Start Quick Start Taking Still Pictures This is the simplest way to take still pictures. The flash discharges automatically based on light cond itions by the default setting. 1 Press the power switch. The camera will turn on. 2 Confirm the subject and shooting information on the LCD monitor.
25 2 Quick Start The shutter release butt on works in two steps. • Press halfway Lightly press (halfway) the shutter rel ease button to lock the focus position, exposure, and white balance. The shutter speed and aperture settings are only displayed when pressing the shutter release button halfway.
26 2 Quick Start Quick Start Playing Back Still Pictures To play back still pictures: 1 Press the playback button after taking a picture. The captured image is displayed on the LCD monitor. You can play back still pictures , cycling through one at a time.
27 2 Quick Start While the image is displayed, press the i button to display the Delete screen. Press the four-way controller ( 2 ) to select Delete, and press OK. The image is deleted. Press the shutter release bu tton halfway or fully to prepare the camera to take another picture.
28 2 Quick Start Quick Start Using an SD Memory Card / MultiMediaCard Images taken with the camera are recorded on the SD Memory Card / Mult iMediaCard. You can use the camera to view the images recorded on the card, transfer the images to your PC, and print them out.
29 2 Quick Start You can view recorded images and edit them on the PC just by connecting the camera to the PC wi th the USB cable and downloading the images (you need to install the USB driver if you are using Windows 98). You can also remove the SD Me mory Card / MultiMediaCard from the camera and transfer the data wi th a card reader.
30 3 Common Operations Common Operations Using the Button Functions The Button functions of Capture Mode are as follows, and this mode is switched to Playback Mode by pressing Playback button. 1 O button Switches to voice recording mode. ( 1 p.61) 2 b button Changes the flash mode.
31 3 Common Operations The Button functions of Playback Mode are as follows, and this mode is switched to Capture Mode by pressi ng Playback button or the shutter release button halfway. 1 O button A voice memo is added to the image. ( 1 p.74) The voice memo can be se t as a voice message.
32 3 Common Operations Setting the Menu Press the MENU button to display th e menus on the LCD screen. With these you can set function s, save the settings, and change the camera settings. A button operation guide is displa yed on the LCD monitor during menu operation.
33 3 Common Operations Example of menu operation (P ressing the MENU button in Capture mode) • If you press the shutter release bu tton halfway and move the camera to Capture mode, any changes to the setting will not be saved. • When you display the menu from Capture mode, the [ A Rec.
34 3 Common Operations [ A Rec.Mode] Menu [ Q Playback] Menu Menu List Item Description Refere nce Recorded Pixels Select s the number of re corded pixels. p.40 Quality level Selects the im age compression rate. p.41 White Balance Adjusts color bala nce according to lighting.
35 3 Common Operations [ B Set-up] Menu Item Description Refere nce Format Formats the SD Memory Card / MultiMediaCard. p.90 Sound Sets the volume and type of bu tton operation so und, start-up sound, shutter sound, and self-timer sound. p.91 Date Adjust Sets the date and time.
36 4 Taking Pictures Taking Pictures Setting the Capture Functions Capture mode is for taking pictures . Playback mode is for playing back or erasing images and sound.
37 4 Taking Pictures 2 Press the four-way controller ( 45 ) to select your desired display mode. The selected icon is displayed in a frame. 3 Press the OK button. The icon of the selected Capture mode is displa yed and the camera is ready to take pictures.
38 4 Taking Pictures On the z setting, press the four-way controller ( 23 ) to enlarge the central portion of the screen to full screen on the LCD monitor.
39 4 Taking Pictures 1 Press the b button in Capture mode. This will switch flash modes, and the current icon will be displayed on the LCD monitor. The camera is ready to take a pi cture in the selected flash mode. Selecting the Flash Mode (No icon) Auto The flash discharges automatically based on light conditions.
40 4 Taking Pictures Select the number of recorded pixels from 2048×1536, 1600×1200, 1024×768, 640×480. The more pixels there are, the larg er the image size and file size. The image file size will also differ according to quality level settings. 1 Press the MENU button in Capture mode.
41 4 Taking Pictures Select the image compression rate. The more E there are, the better the qual ity and the larger the file. The image file size will also differ according to Recorded Pixels settings. 1 Press the MENU button in Capture mode. The [ A Rec.
42 4 Taking Pictures Adjusts for natural coloring in your picture, according to the lighting. 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu will be displayed. 2 Select [White Balance] on the [ A Rec. Mode] menu. 3 Press the four-way controller ( 5 ).
43 4 Taking Pictures 1 Select [ K ] (Manual) on the White Balance selection screen. 2 Point your camera at white paper to fill the screen. 3 Press the OK button. The LCD monitor will display “Adjus ting”, and return to the menu screen when the white balance is adjusted.
44 4 Taking Pictures You can change the area fo r autofocus (Focusing Area). 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu will be displayed. 2 Select [Focusing Area] on the [ A Rec. Mode] menu. 3 Press the four-way controller ( 45 ) to change the focusing area.
45 4 Taking Pictures You can choose the part of the scr een to use for measuring brightness and determining exposure. 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu will be displayed. 2 Select [AE Metering] on the [ A Rec. Mode] menu.
46 4 Taking Pictures You can set the Sensitivity to matc h the brightness of the surroundings. 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu will be displayed. 2 Select [Sensitivity] on the [ A Rec. Mode] menu. 3 Press the four-way controller ( 45 ) to change the sensitivity.
47 4 Taking Pictures You can make the image ou tlines sharp or soft. 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu will be displayed. 2 Select [Sharpness] on the [ A Rec. Mode] menu. 3 Press the four-way controller ( 45 ) to select x (Normal), z (Hard), or y (Soft).
48 4 Taking Pictures This sets the co lor saturation. 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu will be displayed. 2 Select [Saturation] on the [ A Rec. Mode] menu. 3 Press the four-way controller ( 45 ) to select x (Normal), z (High), or y (Low).
49 4 Taking Pictures You can set the image contrast level. 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu will be displayed. 2 Select [Contrast] on the [ A Rec. Mode] menu. 3 Press the four-way controller ( 45 ) to select x (Normal), z (High), or y (Low).
50 4 Taking Pictures Taking Pictures In Program Mode ( e ), you can set all the functions and take pictures. 1 Press the four-way controller ( 3 ) in Capture Mode. The virtual mode dial is displayed. 2 Press the four-way controller ( 45 ) to select [ e ].
51 4 Taking Pictures You can match your settings to the situation. Picture Mode There are nine modes available. Picture Mode H Landscape Enhances your landscape photos. / Night-Scene Mode Enables you to take dark scenes such as night views. & Night-Scene Portrait Enables you to take portra its in dark conditions.
52 4 Taking Pictures 1 Press the four-way controller ( 3 ) in Capture Mode. The virtual mode dial is displayed. 2 Press the four-way controller ( 45 ) to select your desired display mode. 3 Press the OK button. The Picture mode is selected. 4 Press the shutter release button.
53 4 Taking Pictures Using the included software (ACDSe e™), you can easily join several images to form one panorama pictur e. Overlap and stit ch the edges of images taken in Panorama Assist mo de and create a panorama image. 1 Press the four-way controller ( 3 ) in Capture Mode.
54 4 Taking Pictures 6 Take the second image. Move the camera to th e right until the real image approx. coinci des with the half transparent one, and th en press the shutter release button for taking the second image. Repeat the same procedure for taking the third image and following pictures.
55 4 Taking Pictures The picture will be taken 10 seconds after the shutter release button is pressed. 1 Press the four-way controller ( 2 ) to display g on the LCD monitor. 2 Press the shutter release button. The self-timer is enga ged and the self-timer lamp lights.
56 4 Taking Pictures Pictures are taken continually while the shutter release button is pressed. There are Continuous Shoo ting and Multi Continuous Shooting as foll ows. 1 Press the four-way controller ( 2 ) to display aj or a_ on the LCD monitor. 2 Press the shutter release button.
57 4 Taking Pictures In this mode, still pictures are taken automatically at a fixed interval. 1 Press the four-way controller ( 2 ) to display k on the LCD monitor. 2 Press the shutter release button. Interval shooting will star t with the following settings.
58 4 Taking Pictures 4 Set the interval time. 1. Press the four-way controller ( 5 ). 23 are displayed above and below the number of minutes. 2. Use the four-way controller ( 23 ) to change the number of minutes, then press the four-way controller ( 5 ).
59 4 Taking Pictures You can use the Zoom to take pictures in Tele or Wide mode. 1 Press the Zoom button in Capture mode. x Tele: Subject becomes larger. w Wide: Subject becomes smaller. When the digital zoom fu nction is disabled, the optical zoom can be used to enlarge the subject up to 2.
60 4 Taking Pictures 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu will be displayed. 2 Press the four-way controller ( 3 ) to select [Digital Zoom]. 3 Press the four-way controller ( 5 ) to select On. 4 Press the OK button. The camera is ready to take the picture.
61 4 Taking Pictures This mode is for recording sound. Th e recordable time is displayed on the LCD monitor according to how much memory is available on the SD Memory Card / MultiMediaCard. 1 Press the O button in Capture mode. The recordable time is displayed on the LCD monitor.
62 4 Taking Pictures Use EV Compensation when you want to intentionally over expose (brighten) or under expose (darken) your picture. 1 Press the four-way controller ( 45 ) in Capture Mode. 5 Adjusts the exposure to over-expose (+ side), 4 Adjusts the exposure to under-expose (- side).
63 4 Taking Pictures You can take movie pictures. The recording time for a single movie is displayed at the top right of the LCD monitor. Sound can be recorded at the same time. You can select either 32 0×240 or 160×120 for recorded pixels in movie picture mode 1 p.
64 4 Taking Pictures 5 Press the shutter release button. Recording will end. The remaining avai lable recording time is displayed. If you hold down the shutter release bu tton for one second or more, the camera will record while you hold down the button.
65 4 Taking Pictures In movie picture mode, you can select either 320×240 or 160×120 for the number of recorded pixels (resolution). The more pixels there are, the larger the image size but the smaller the recording time. 1 Press the MENU button in Capture mode.
66 4 Taking Pictures You can record a movie picture in one of three color mode settings: full- color, black-and-white, or sepia. 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu will be displayed. 2 Select [Movie] on the [ A Rec. Mode] menu.
67 4 Taking Pictures This mode lets you take movie pictur es at a delayed frame rate so that when you play the movie back, the action appears speeded up. 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu will be displayed. 2 Select [Movie] on the [ A Rec.
68 4 Taking Pictures Saving the Settings You can choose whether to save th e set values when the camera is turned off. If you select On, the came ra saves the settings in effect just before the camera is turned off. If you select Off, the settings return to default settings when the camera is turned off.
69 4 Taking Pictures 1 Press the MENU button in Capture mode. 2 Press the four-way controller ( 23 ) to select [Memory]. 3 Press the four-way controller ( 5 ). The Memory menu will be displayed. 4 Press the four-way controller ( 23 ) to select the item.
70 5 Playback/Deleting Playback/Deleting Playing Back Images See “Playing Back Images” (p.2 6) and “Playing Back Previo us or Next Images” (p.26). You can display images magnified up to 8 times. A guide to operation is displayed on the LCD monito r during magnification.
71 5 Playback/Deleting You can display nine images at the same time. 1 Enter the Playback mode and choose the image you want to place in the center with the four-way controller ( 45 ). 2 Press w / f on the Zoom/ f / y button. Nine images will be displayed with the selected image in the center.
72 5 Playback/Deleting You can continuously play back all the images on the SD Memory Card / MultiMediaCard. 1 Enter the Playback mode and choose the image with which to start the slideshow with the four-way controller ( 45 ). 2 Press the MENU button.
73 5 Playback/Deleting You can play back movie pictures. A gu ide to operation is displayed on the LCD monitor during playback. The sound is played back at the same time. 1 Enter the Playback mode and choose the movie picture you want to play with the four-way controller ( 45 ).
74 5 Playback/Deleting You can add a voice memo to a recorded image. 1 Enter the playback mode and choose the image to which you want to add a voice memo with the four-way controller ( 45 ). If the image has no voice memo, the screen for recording a voice memo is displayed on the LCD monitor.
75 5 Playback/Deleting A voice memo added to an image can be set as a voice message. The O button flashes during voice messa ge recording, indicating that there is a voice message. 1 Press the MENU button in Playback mode. The Playback Mode menu is displayed.
76 5 Playback/Deleting You can play back the recording y ou made in Voice Recording mode. 1 Enter the Playback mode and choose the recording you want to play with the four-way controller ( 45 ). 2 Press the four-way controller ( 2 ). Playback will start.
77 5 Playback/Deleting Deleting Images 1 Enter the Playback mode and choose the image you want to delete with the four-way controller ( 45 ). 2 Press the i button. The Delete screen will be displayed. 3 Select [Delete] with the four-way controller ( 2 ).
78 5 Playback/Deleting If an image has a voice memo (indicated with U ), you can delete the voice memo without deleting the image. 1 Enter the Playback mode and choose the image with the voice memo that you want to delete with the four- way controller ( 45 ).
79 5 Playback/Deleting You can delete all the images/sound at once. 1 Enter the Playback mode and press the i button twice. The Delete All Images/Sound screen will be displayed. 2 Select [Delete All] with the four-way controller ( 2 ). 3 Press the OK button.
80 5 Playback/Deleting You can protect images/sounds fr om being accidentally deleted. 1 Enter the Playback mode and choose the image or sound you want to protect with the four-way controller ( 45 ). 2 Press the Z button. The Protect screen will be displayed.
81 5 Playback/Deleting Viewing Images on a TV By using the AV cable, you can ca pture and play back images on a TV or other equipment with a video IN jack. Make sure that both the TV and the camera are turned off before connecting the cable. 1 Open the terminal cover and connect the AV cable.
82 5 Playback/Deleting Setting the Printing Service (DPOF) You can print the images on the SD Memory Card / MultiMediaCard using a DPOF (Digital Print Order Fo rmat) compatible printer or at a printing service. Set the following items for each image. Number of prints: Set the num ber of prints.
83 5 Playback/Deleting 4 Use the four-way controller ( 45 ) to select either O (On) or P (Off) for imprinting the date. O : The date will be imprinted. P : The date will not be imprinted. 5 Press the OK button. Prints can be made according to the settings.
84 5 Playback/Deleting 1 Enter the playback mode and press the four-way controller ( 2 ). The DPOF screen will be displayed. 2 Press the four-way controller ( 2 ). The DPOF [All Images] screen will be displayed. 3 Use the four-way controller ( 45 ) to select the number of prints.
85 6 Editing/Settings Editing/Settings Editing Images By changing the size and quality of a selected image, you can make the file smaller than the original. After changing the size, the image can be saved as a new image or wri tten over the original image.
86 6 Editing/Settings 7 Select [Recorded Pixels] with the four-way controller ( 45 ). 8 Press the four-way controller ( 3 ). The frame will move to [Quality Level]. 9 Press the four-way controller ( 45 ) to select [Quality Level]. 10 Press the OK button.
87 6 Editing/Settings You can trim part of a picture and save it as a separate image. 1 Press the MENU button. 2 Press the four-way controller ( 5 ). The [ Q Playback] menu will be displayed. 3 Press the four-way controller ( 23 ) to select [Trimming].
88 6 Editing/Settings The filters consist of color filters such as red, blue, and green, a soft filter that produces a fuzzy effect, and a brightness filter that adjusts the brightness of the image. In Digital Filter mode, th ese filters can be used to edit an image.
89 6 Editing/Settings 1 Press the MENU button in Playback mode. 2 Press the four-way controller ( 23 ) to select [Digital Filter]. 3 Press the four-way controller ( 5 ). The digital filter setup sc reen will be displayed. 4 Use the four-way controller ( 45 ) to select the image you want to edit.
90 6 Editing/Settings Camera Settings Formatting will delete all the data on the SD Memory Card/ MultiMediaCard. 1 Select [Format] on the [ B Set-up] menu. 2 Press the four-way controller ( 5 ). The format screen is displayed. 3 Select [Format] with the four-way controller ( 2 ).
91 6 Editing/Settings You can change the volume of the start-up sound, shutter sound, operation sounds, and self-timer soun d. You can also change the type of each sound. 1 Select [Sound] on the [ B Set-up] menu. 2 Press the four-way controller ( 5 ).
92 6 Editing/Settings You can change the initial date and time settings. You can also set the date display style. Choose from yy/mm/dd, mm/dd/yy, and dd/mm/yy. 1 Select [Date Adjust] on the [ B Set-up] menu. 2 Press the four-way controller ( 5 ). The Date Adjust screen is displayed.
93 6 Editing/Settings The date and time set in “Initial Settings (p.20)” are the Home Time (your usual time zone) setting. Setting World Time enables you to disp lay the local date and time on the monitor when traveling overseas. 1 Select [World Time] on the [ B Set-up] menu.
94 6 Editing/Settings You can change the language of the menus and error messages. 1 Select [Language/ ] on the [ B Set-up] menu. 2 Press the four-way controller ( 45 ) to change the language. 3 Press the OK button. The camera is ready for capture or playback.
95 6 Editing/Settings This determines the content disp layed on the LCD monitor. You can select Normal, Histogram, No. Info, or Off. Capture mode and Playback mode display different information on the screen.
96 6 Editing/Settings No. Info Capture information is not displayed. • During Autofocus, the Autofocus frame (in Capture mode) is displayed. • Settings are displayed for several seconds when changed. Off Turns off the LCD monitor. (The LCD monitor is not turned off in Playback mode.
97 6 Editing/Settings You can display an image recorded with the camera as the welcome screen when the camera is turned on. 1 Select [Screen Setting] on the [ B Set-up] menu. 2 Press the four-way controller ( 5 ). The Screen Setting screen will be displayed.
98 6 Editing/Settings This sets the backgr ound design and color di splayed on the LCD monitor. 1 Select [Screen Setting] on the [ B Set-up] menu. 2 Press the four-way controller ( 5 ). The Screen Setting screen will be displayed. 3 Press the four-way controller ( 3 ) to select [Background color].
99 6 Editing/Settings You can select the output format (NTS C or PAL) for capt uring or playing back images on a TV monitor. 1 Select [Video Out] on the [ B Set-up] menu. 2 Press the four-way controller ( 45 ) to select [NTSC] or [PAL], to match your TV output format.
100 6 Editing/Settings Setting the Alarm You can set the alarm to ring at a sp ecified time and display a selected image. 1 Press the MENU button. 2 Press the four-way controller ( 5 ). The [ Q Playback] menu will be displayed. 3 Press the four-way controller ( 23 ) to select [Alarm].
101 6 Editing/Settings 1 Press the MENU button. 2 Press the four-way controller ( 5 ). The [ Q Playback] menu will be displayed. 3 Press the four-way controller ( 23 ) to select [Alarm]. 4 Press the four-way controller ( 5 ). The list of alarms will be displayed.
102 6 Editing/Settings 1 To stop the alarm ringing, press any button. The alarm will stop. Turning the Alarm Off To cancel the Snooze function, pr ess the MENU button and OK button at the same time. The alarm will not ring when the camera is turned on.
103 7 Appendix Appendix List of City Names There are the cities and code numb ers available for setting the world time. City Code City Code Tokyo TYO Johannesburg JNB Guam GUM Instanbul IST Sydney SYD.
104 7 Appendix Messages The following messages may be displayed on the LCD monitor during camera operation. Compression error Compression of the im age you captured has failed.
105 7 Appendix Optional Accessories The following optional accessories are available for this camera. AC Adapter D-AC5 USB Cable I-USB7 (included) AV Cable I-AVC7 (included).
106 7 Appendix Troubleshooting Problem Cause Remedy The camera will not turn on. No batteries are installed. Check whether battery is installed. If not, install battery. Battery/card cover is open. Close the battery/card cover. Battery is installed incorrectly.
107 7 Appendix Out of focus Subject is difficult for Autofocus to handle. Subjects difficult for Autofocus include those with low contrast (blue skies, white walls), dark objects, fine-patterned objects, fast-moving objects, and landscapes seen through a window or net.
108 7 Appendix Main Specifications Image Storage Capacity • Exposure capacity when using a 16MB SD Memory Card. Model Fully-automatic compact weather-resistant (JIS class 5) dig ital still camera with housed zoom lens Effective Pixels 3.2 megapixels Sensor 3.
109 7 Appendix Autofocus system Type TTL contrast detection by sensor Capture Range (From lens front) Normal: 0.3m - ∞ (full zoom range) Macro: 0.01m - 0.5m (Wide), 0.2m -0.5m (Tele) (full zoom range) Infinity-landscape: ∞ (full zoom range) Focus Lock By pressing the sh utter release button halfway Manual Focus 0.
110 7 Appendix WARRANTY POLICY All PENTAX cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from date of purchase.
111 7 Appendix Always obtain a quotation for the servic e charge, and only after you accept the quoted service charge, instruct the servic e station to proceed with the servicing. • This warranty policy does not affect the customer’s statutory rights.
112 7 Appendix For customers in USA STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two cond itions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
113 7 Appendix Declaration of Conformity According to 47CFR, Parts 2 and 15 for Class B Personal Computers and Peripherals We: PENTAX U.S.A., Inc. Located at: 600 12 Street, Suite 300, Golden, Colorado 80401, U.
• Printed on recycled paper • Specifications and external dimensions are subject to chan ge without notice. 57317 Copyright © PENTAX Corporation 2003 02-200310 Prin ted in Japan PENTAX Corporation 2-36-9,Maeno-cho, Itabashi -ku, Tokyo 174-8639, JAPAN (http://www.
デバイスPentax 33WRの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Pentax 33WRをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPentax 33WRの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pentax 33WRの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pentax 33WRで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pentax 33WRを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPentax 33WRの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pentax 33WRに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPentax 33WRデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。